Vector License Client » Command Line Interface » Configure Server Search List

Configure Server Search List

 

This information applies only to the license of the type Named User (Network Activation).

On each computer that is to use network licenses, customer license servers must be stored in the server search list. One or more servers can be stored and the order for these can be defined. Network licenses are then searched for on stored servers. For the following procedures you need the three commands addServers, removeServers and removeAllServers.

Procedure

Add a Server

  1. Open the command line interface.
  2. Enter the following command:
    Vector.LicenseClient -addServers <ServerList> [-disableLogging] [-v]
    The ServerList can contain one or more servers. The individual servers are separated by a ;. You can specify the server by indicating the IP or Servername.
  3. Press <Enter>.

Procedure

Remove a Customer License Server

  1. Open the command line interface.
  2. Enter the following command:
    Vector.LicenseClient -removeServers <ServerList> [-disableLogging] [-v]
    The ServerList can contain one or more servers. The individual servers are separated by a ;. You can specify the server by indicating the IP or Servername.
  3. Press <Enter>.

Procedure

Remove All Customer License Servers

  1. Open the command line interface.
  2. Enter the following command:
    Vector.LicenseClient -removeAllServers [true|false] [-disableLogging] [-v]
    This removes all servers from the server search list.
    Decide whether the automatic server search (broadcasting) should remain, possibly activated (true - default) or deactivated (false).
  3. Press <Enter>.

Cross Reference

Cross Reference

For an up-to-date, detailed procedure, please see the following article in the Vector KnowledgeBase:

https://support.vector.com/kb/?id=kb_article_view&sysparm_article=KB0013151