# encoding: utf-8 # module vtkmodules.vtkInteractionWidgets # from C:\Users\xukai\Downloads\发票2\venv\Lib\site-packages\vtkmodules\vtkInteractionWidgets.cp311-win_amd64.pyd # by generator 1.147 # no doc # imports import vtkmodules.vtkCommonCore as __vtkmodules_vtkCommonCore import vtkmodules.vtkCommonExecutionModel as __vtkmodules_vtkCommonExecutionModel import vtkmodules.vtkFiltersSources as __vtkmodules_vtkFiltersSources import vtkmodules.vtkRenderingContext2D as __vtkmodules_vtkRenderingContext2D import vtkmodules.vtkRenderingCore as __vtkmodules_vtkRenderingCore from .vtkAbstractWidget import vtkAbstractWidget class vtkSliderWidget(vtkAbstractWidget): """ vtkSliderWidget - set a value by manipulating a slider Superclass: vtkAbstractWidget The vtkSliderWidget is used to set a scalar value in an application. This class assumes that a slider is moved along a 1D parameter space (e.g., a spherical bead that can be moved along a tube). Moving the slider modifies the value of the widget, which can be used to set parameters on other objects. Note that the actual appearance of the widget depends on the specific representation for the widget. To use this widget, set the widget representation. The representation is assumed to consist of a tube, two end caps, and a slider (the details may vary depending on the particulars of the representation). Then in the representation you will typically set minimum and maximum value, as well as the current value. The position of the slider must also be set, as well as various properties. @par Event Bindings: By default, the widget responds to the following VTK events (i.e., it watches the vtkRenderWindowInteractor for these events): If the slider bead is selected: LeftButtonPressEvent - select slider (if on slider) LeftButtonReleaseEvent - release slider (if selected) MouseMoveEvent - move slider If the end caps or slider tube are selected: LeftButtonPressEvent - move (or animate) to cap or point on tube; @par Event Bindings: Note that the event bindings described above can be changed using this class's vtkWidgetEventTranslator. This class translates VTK events into the vtkSliderWidget's widget events: vtkWidgetEvent::Select -- some part of the widget has been selected vtkWidgetEvent::EndSelect -- the selection process has completed vtkWidgetEvent::Move -- a request for slider motion has been invoked @par Event Bindings: In turn, when these widget events are processed, the vtkSliderWidget invokes the following VTK events on itself (which observers can listen for): vtkCommand::StartInteractionEvent (on vtkWidgetEvent::Select) vtkCommand::EndInteractionEvent (on vtkWidgetEvent::EndSelect) vtkCommand::InteractionEvent (on vtkWidgetEvent::Move) """ def CreateDefaultRepresentation(self): # real signature unknown; restored from __doc__ """ CreateDefaultRepresentation(self) -> None C++: void CreateDefaultRepresentation() override; Create the default widget representation if one is not set. """ pass def GetAnimationMode(self): # real signature unknown; restored from __doc__ """ GetAnimationMode(self) -> int C++: virtual int GetAnimationMode() """ return 0 def GetAnimationModeMaxValue(self): # real signature unknown; restored from __doc__ """ GetAnimationModeMaxValue(self) -> int C++: virtual int GetAnimationModeMaxValue() """ return 0 def GetAnimationModeMinValue(self): # real signature unknown; restored from __doc__ """ GetAnimationModeMinValue(self) -> int C++: virtual int GetAnimationModeMinValue() """ return 0 def GetNumberOfAnimationSteps(self): # real signature unknown; restored from __doc__ """ GetNumberOfAnimationSteps(self) -> int C++: virtual int GetNumberOfAnimationSteps() """ return 0 def GetNumberOfAnimationStepsMaxValue(self): # real signature unknown; restored from __doc__ """ GetNumberOfAnimationStepsMaxValue(self) -> int C++: virtual int GetNumberOfAnimationStepsMaxValue() """ return 0 def GetNumberOfAnimationStepsMinValue(self): # real signature unknown; restored from __doc__ """ GetNumberOfAnimationStepsMinValue(self) -> int C++: virtual int GetNumberOfAnimationStepsMinValue() """ return 0 def GetNumberOfGenerationsFromBase(self, type): # real signature unknown; restored from __doc__ """ GetNumberOfGenerationsFromBase(self, type:str) -> int C++: vtkIdType GetNumberOfGenerationsFromBase(const char *type) override; Given the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). If the named class is not in this class's inheritance tree, return a negative value. Valid responses will always be nonnegative. This method works in combination with vtkTypeMacro found in vtkSetGet.h. """ return 0 def GetNumberOfGenerationsFromBaseType(self, type): # real signature unknown; restored from __doc__ """ GetNumberOfGenerationsFromBaseType(type:str) -> int C++: static vtkIdType GetNumberOfGenerationsFromBaseType( const char *type) Given a the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). If the named class is not in this class's inheritance tree, return a negative value. Valid responses will always be nonnegative. This method works in combination with vtkTypeMacro found in vtkSetGet.h. """ return 0 def GetSliderRepresentation(self): # real signature unknown; restored from __doc__ """ GetSliderRepresentation(self) -> vtkSliderRepresentation C++: vtkSliderRepresentation *GetSliderRepresentation() Return the representation as a vtkSliderRepresentation. """ return vtkSliderRepresentation def IsA(self, type): # real signature unknown; restored from __doc__ """ IsA(self, type:str) -> int C++: vtkTypeBool IsA(const char *type) override; Return 1 if this class is the same type of (or a subclass of) the named class. Returns 0 otherwise. This method works in combination with vtkTypeMacro found in vtkSetGet.h. """ return 0 def IsTypeOf(self, type): # real signature unknown; restored from __doc__ """ IsTypeOf(type:str) -> int C++: static vtkTypeBool IsTypeOf(const char *type) Return 1 if this class type is the same type of (or a subclass of) the named class. Returns 0 otherwise. This method works in combination with vtkTypeMacro found in vtkSetGet.h. """ return 0 def NewInstance(self): # real signature unknown; restored from __doc__ """ NewInstance(self) -> vtkSliderWidget C++: vtkSliderWidget *NewInstance() """ return vtkSliderWidget def SafeDownCast(self, o): # real signature unknown; restored from __doc__ """ SafeDownCast(o:vtkObjectBase) -> vtkSliderWidget C++: static vtkSliderWidget *SafeDownCast(vtkObjectBase *o) """ return vtkSliderWidget def SetAnimationMode(self, _arg): # real signature unknown; restored from __doc__ """ SetAnimationMode(self, _arg:int) -> None C++: virtual void SetAnimationMode(int _arg) Control the behavior of the slider when selecting the tube or caps. If Jump, then selecting the tube, left cap, or right cap causes the slider to jump to the selection point. If the mode is Animate, the slider moves towards the selection point in NumberOfAnimationSteps number of steps. If Off, then the slider does not move. """ pass def SetAnimationModeToAnimate(self): # real signature unknown; restored from __doc__ """ SetAnimationModeToAnimate(self) -> None C++: void SetAnimationModeToAnimate() """ pass def SetAnimationModeToJump(self): # real signature unknown; restored from __doc__ """ SetAnimationModeToJump(self) -> None C++: void SetAnimationModeToJump() """ pass def SetAnimationModeToOff(self): # real signature unknown; restored from __doc__ """ SetAnimationModeToOff(self) -> None C++: void SetAnimationModeToOff() """ pass def SetNumberOfAnimationSteps(self, _arg): # real signature unknown; restored from __doc__ """ SetNumberOfAnimationSteps(self, _arg:int) -> None C++: virtual void SetNumberOfAnimationSteps(int _arg) Specify the number of animation steps to take if the animation mode is set to animate. """ pass def SetRepresentation(self, r): # real signature unknown; restored from __doc__ """ SetRepresentation(self, r:vtkSliderRepresentation) -> None C++: void SetRepresentation(vtkSliderRepresentation *r) Specify an instance of vtkWidgetRepresentation used to represent this widget in the scene. Note that the representation is a subclass of vtkProp so it can be added to the renderer independent of the widget. """ pass def __delattr__(self, *args, **kwargs): # real signature unknown """ Implement delattr(self, name). """ pass def __getattribute__(self, *args, **kwargs): # real signature unknown """ Return getattr(self, name). """ pass def __init__(self, *args, **kwargs): # real signature unknown pass @staticmethod # known case of __new__ def __new__(*args, **kwargs): # real signature unknown """ Create and return a new object. See help(type) for accurate signature. """ pass def __repr__(self, *args, **kwargs): # real signature unknown """ Return repr(self). """ pass def __setattr__(self, *args, **kwargs): # real signature unknown """ Implement setattr(self, name, value). """ pass def __str__(self, *args, **kwargs): # real signature unknown """ Return str(self). """ pass __this__ = property(lambda self: object(), lambda self, v: None, lambda self: None) # default """Pointer to the C++ object.""" __dict__ = None # (!) real value is 'mappingproxy({\'__vtkname__\': \'vtkSliderWidget\', \'IsTypeOf\': , \'IsA\': , \'SafeDownCast\': , \'NewInstance\': , \'GetNumberOfGenerationsFromBaseType\': , \'GetNumberOfGenerationsFromBase\': , \'SetRepresentation\': , \'GetSliderRepresentation\': , \'SetAnimationMode\': , \'GetAnimationModeMinValue\': , \'GetAnimationModeMaxValue\': , \'GetAnimationMode\': , \'SetAnimationModeToOff\': , \'SetAnimationModeToJump\': , \'SetAnimationModeToAnimate\': , \'SetNumberOfAnimationSteps\': , \'GetNumberOfAnimationStepsMinValue\': , \'GetNumberOfAnimationStepsMaxValue\': , \'GetNumberOfAnimationSteps\': , \'CreateDefaultRepresentation\': , \'__new__\': , \'__repr__\': , \'__str__\': , \'__getattribute__\': , \'__setattr__\': , \'__delattr__\': , \'__dict__\': , \'__this__\': , \'__doc__\': "vtkSliderWidget - set a value by manipulating a slider\\n\\nSuperclass: vtkAbstractWidget\\n\\nThe vtkSliderWidget is used to set a scalar value in an application. \\nThis class assumes that a slider is moved along a 1D parameter space\\n(e.g., a spherical bead that can be moved along a tube). Moving the\\nslider modifies the value of the widget, which can be used to set\\nparameters on other objects. Note that the actual appearance of the\\nwidget depends on the specific representation for the widget.\\n\\nTo use this widget, set the widget representation. The representation\\nis assumed to consist of a tube, two end caps, and a slider (the\\ndetails may vary depending on the particulars of the representation).\\nThen in the representation you will typically set minimum and maximum\\nvalue, as well as the current value. The position of the slider must\\nalso be set, as well as various properties.\\n\\n@par Event Bindings: By default, the widget responds to the following\\nVTK events (i.e., it watches the vtkRenderWindowInteractor for these\\nevents):\\n\\nIf the slider bead is selected:\\n LeftButtonPressEvent - select slider (if on slider)\\n LeftButtonReleaseEvent - release slider (if selected)\\n MouseMoveEvent - move slider If the end caps or slider tube are\\nselected:\\n LeftButtonPressEvent - move (or animate) to cap or point on tube; \\n\\n@par Event Bindings: Note that the event bindings described above can\\nbe changed using this class\'s vtkWidgetEventTranslator. This class\\ntranslates VTK events into the vtkSliderWidget\'s widget events:\\n\\n\\n vtkWidgetEvent::Select -- some part of the widget has been selected\\n vtkWidgetEvent::EndSelect -- the selection process has completed\\n vtkWidgetEvent::Move -- a request for slider motion has been\\ninvoked \\n\\n@par Event Bindings: In turn, when these widget events are processed,\\nthe vtkSliderWidget invokes the following VTK events on itself (which\\nobservers can listen for):\\n\\n\\n vtkCommand::StartInteractionEvent (on vtkWidgetEvent::Select)\\n vtkCommand::EndInteractionEvent (on vtkWidgetEvent::EndSelect)\\n vtkCommand::InteractionEvent (on vtkWidgetEvent::Move) \\n\\n"})' __vtkname__ = 'vtkSliderWidget'