//===================================
//发送字符串到串口
// 5a a5 05 82
void LCD_putstring(u8  *puts,u8 datalength) 
{
  
    u8  length;
   // OSTimeDlyHMSM(0, 0,0,20); 
    length = datalength;
    for( ;length>0 ; puts++, length--)   
    { 
      LCD_putbyte(*puts);
    } 
}

//--------------------切换页面 LCD-----------
void LCD_Jump_PageID(u16 PageID) //SendToLcdREG(0);
{ 
   INT8U err;
  OSMutexPend(  App_Sem_Mutex_LCD,0,&err);
  u8 Send[7];
  Send[0]=0x5a ;
  Send[1]=0xa5;
  Send[2]=4;
  Send[3]=0x80;
 
  Send[4]= 0x03;
  Send[5]= (u16)PageID/256;
  Send[6]= (u16)PageID%256;
  LCD_putstring(Send,7);
  OSMutexPost( App_Sem_Mutex_LCD );     /*释放LCD使用权*/
  
}
//=======================================================
void ReadSendToLcdREG(u8 REGaddr)
{  
  INT8U err;
  OSMutexPend(  App_Sem_Mutex_LCD,0,&err); 
  
  u8 Send[6]={0x5a,0xa5,3,0x81,0,7};
  Send[4]= REGaddr;
  LCD_putstring(Send,6);
                   
  OSMutexPost( App_Sem_Mutex_LCD );     /*释放LCD使用权*/
}
//-------发送寄存器值到LCD-----------
void SendToLcdREG(u8 REGaddr,u16 PageID)
{  INT8U err;
  OSMutexPend(  App_Sem_Mutex_LCD,0,&err); 
  u8 Send[7]={0x5a,0xa5,4,0x80,0,0,0};
  Send[4]= REGaddr;
  Send[5]= (u16)PageID/256;
  Send[6]= (u16)PageID%256;
  LCD_putstring(Send,7);
  OSMutexPost( App_Sem_Mutex_LCD);     /*释放LCD使用权*/
}
//--------发送变量值到LCD显示-----------
void SendToLcd(unsigned int addr,short int Variable)
{ 
  INT8U err;
  OSMutexPend(  App_Sem_Mutex_LCD,0,&err); 
  u8 Send[8]={0x5a,0xa5,5,0x82,0,0,0,0};
  Send[4]= addr/256;
  Send[5]= addr%256;
  Send[6]= (u16)Variable/256;
  Send[7]= (u16)Variable%256;
  LCD_putstring(Send,8);
  OSMutexPost( App_Sem_Mutex_LCD);     /*释放LCD使用权*/
}
//------发送变量值到LCD显示-----------
void SendToLcdTw0Byte(unsigned int addr, int Variable)
{ 
  INT8U err;
  OSMutexPend(  App_Sem_Mutex_LCD,0,&err); 
  u8 Send[10]={0x5a,0xa5,7,0x82,0,0,0,0,0,0};

  Send[4]= addr/256;
  Send[5]= addr%256;
  Send[6]= (u32)Variable/256/256/256;
  Send[7]= (u32)Variable/256/256;
  Send[8]= (u32)Variable/256;
  Send[9]= (u32)Variable%256;
  
  LCD_putstring(Send,10);
  OSMutexPost( App_Sem_Mutex_LCD);     /*释放LCD使用权*/
}
/*==================================
读出存储的参数发送至LCD,初始化所有LCD变量
=================================*/
void INTI_LCD(void)
{ //0x0010 ---0x00ff;0x0200--0x02ff
   INT8U err;  
   
   OSMutexPend(  App_Sem_Mutex_LCD,0,&err); 
   
   u8 p[8]={0x5a,0xa5,5,0x82,0x00,0x00,0,0};
 
   u16 buff=0x0;
   for( ;buff<0xff;buff++)// 0x0~0xff
   {
      //读出存储的参数发送至LCD
      p[6]=AT24CXX_ReadOneByte(buff*2);
      p[7]=AT24CXX_ReadOneByte(buff*2+1);
     
      LCD_putstring(p,8);
     
      p[5]++;
   }
   OSMutexPost( App_Sem_Mutex_LCD);     /*释放LCD使用权*/
   // ----清显示变量显示为 0------
   //   SendToLcd(ATest_GR1Tempr,0);
   //   SendToLcd(ATest_GRJGTime,0);
}
//===================================================================
bool Get_DateTime_ok = FALSE;
bool bit_ReTestDisableKey =FALSE;
u8 TASK_Uart4buff[20]={0};

void Task_KEY_LCD (void)
{
    INT8U err;
    u16 CommandAddr=0x0;
    u8 buffcount=0;
    u8 Keydata=0;

    OSTimeDlyHMSM(0, 0,2,0);
    INTI_LCD();/*初始化LCD*/
    OSTimeDlyHMSM(0, 0,1,0);
    
    LCD_Jump_PageID(0);//复位后跳转至0起始页面
    //SendToLcd_quxianValeDeleteAll();
    
    while (DEF_TRUE)
    { 
      bit_ReTestDisableKey =TRUE;
      //OSTimeDlyHMSM(0, 0,0,100);
      OSSemPend (App_TouchSem_ISRtoLCD, 0, &err);
      /*等待中断中LCD触摸屏发送的信号量*/
      // OSTimeDlyHMSM(0, 0,0,100);
       if( ( TASK_Uart4buff[0]==0x5a)&&( ( TASK_Uart4buff[1])==0xa5 ) )
        {
          if(TASK_Uart4buff[3]==0x83)
           {
                CommandAddr = (((u16)(TASK_Uart4buff[4]))<<8 )+ TASK_Uart4buff[5];
                switch(CommandAddr)
                {
                    case 0x00df://0x00df为键盘返回数据
                     {            
                         Keydata= TASK_Uart4buff[8];
                         switch(Keydata)
                          {
                              case 0xcc:
                                {  
                                                                    
                                   NVIC_SystemReset();
                                   NVIC_SystemReset();
                                   NVIC_SystemReset();
                                   //==== 软件强制复位========
                                }break;
                              case 0x10:{ 
                                           if(!ATestIsStart)
                                           {
                                             ATestIsStart=TRUE;
                                             bit_StartTestTimecount=TRUE;
                                             StartTestTimecount = TestPara.TestTime;
                                             StartTestTimecount *=60;
                                           }
                                         }break; //start
                              case 0x11:{
                                           ATestIsStart =FALSE;
                                           SendToLcdTw0Byte(Test_TestTime,0); 
                                      } break;//stop
                              case 0x12:{ bit_CapBack   =TRUE;  }break; //采集背景
                              case 0x13:{ bit_CapSample =TRUE; } break;//采集样品
                              default:{}break;
                          }
                      }break;
                     default:
                      {
                         if(TASK_Uart4buff[2]==8)
                         { 
                           AT24CXX_WriteOneByte(CommandAddr*2,TASK_Uart4buff[7]);
                           AT24CXX_WriteOneByte(CommandAddr*2+1,TASK_Uart4buff[8]);
                           AT24CXX_WriteOneByte(CommandAddr*2+2,TASK_Uart4buff[9]);
                           AT24CXX_WriteOneByte(CommandAddr*2+3,TASK_Uart4buff[10]);
                           SendToLcdTw0Byte(CommandAddr,(int)((u32)TASK_Uart4buff[7]*256*256*256
                                                                  +(u32)TASK_Uart4buff[8]*256*256
                                                                  +(u16)TASK_Uart4buff[9]*256
                                                                  +TASK_Uart4buff[10]));
                         }
                         else
                         {
                           SendToLcd(CommandAddr,(short int)((u16)TASK_Uart4buff[7]*256+TASK_Uart4buff[8]));
                           AT24CXX_WriteOneByte(CommandAddr*2,TASK_Uart4buff[7]);
                           AT24CXX_WriteOneByte(CommandAddr*2+1,TASK_Uart4buff[8]);
                         }
                        //--------------------更新参数---------------------
                         ReadATESTpara();
                         if(CommandAddr==0x01)//设置TEC温度
                           {
                             SendComID_TECTempra((u8)(abs(TestPara.CCD_Temperature)));
                           }
                     }break;
                }
          }
          else if(TASK_Uart4buff[3]==0x81)
           {
              Get_DateTime_ok = TRUE;
              DateTime.Year   = TASK_Uart4buff[buffcount+6];
              DateTime.Month  = TASK_Uart4buff[buffcount+7];
              DateTime.Day    = TASK_Uart4buff[buffcount+8];
              DateTime.Hour   = TASK_Uart4buff[buffcount+10];
              DateTime.Min    = TASK_Uart4buff[buffcount+11];
              DateTime.Sec    = TASK_Uart4buff[buffcount+12];
           }
        }
    }
 }