; --------------------------------------------------------------------------------
; @Title: Example for instrumentation based program trace for PowerPC
; @Description:
;   Loads simple example application in SRAM
;   and shows function trace build from intrumentation messages
; @Author: HLG
; @Chip: MPC55??, MPC5604B
; @Keywords: MPC55xx
; @Copyright: (C) 1989-2014 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: functrace.cmm 7821 2014-10-29 11:06:58Z kjmal $


WinCLEAR
FDX.RESet
AREA.CLEAR
SYStem.RESet
Break.RESet
SNOOPer.RESet
FramePOS ,,,,Maximized
SETUP.TabSize 4.

SYStem.CPU MPC55XX
SYStem.BdmClock 2.MHz
SYStem.Option IMASKASM ON
SYStem.Option IMASKHLL ON
SYStem.Option FREEZE   ON
SYStem.Option WATCHDOG OFF
SYStem.Option DisMode AUTO
IF SIMULATOR()
(
	SYStem.CPU MPC5604B
	SYStem.Option DisMode VLE
	SYStem.MemAccess CPU
)
ELSE
(
	SYStem.MemAccess NEXUS
)
SYStem.Up

IF CPUIS(MPC5601B)||CPUIS(MPC5602B)
(
	LOCAL &ppf
	&ppf=OS.PPF()
	PRINT %ERROR "Sorry, CPU " CPU() " is not supported by " OS.FILE.NAME(&ppf) " (too small SRAM)"
	ENDDO
)

Register.Init
IF !CPUIS(MPC560??)&&!CPUIS(SPC560???)  // Device with MMU ?
(
	MMU.Set TLB1 1 0xC0000300 0x40000028 0x4000003F // Map 64 KB of SRAM to logical address space
	MMU.Set TLB1 2 0xC0000500 0xFFF0002A 0xFFF0003F // Map 1 MB of peripheral reg. to logical address space
)
Data.Set EA:0x40000000++0xBFFF %Quad 0x55AA55AA55AA55AA // Initialize 48 KB of internal SRAM

Data.LOAD.Elf "~~~~/sieve_functrace.elf" /RelPATH
Go.direct main
WAIT !RUN()

FDX.METHOD BufferE
FDX.TraceChannel FdxTraceSendBuffer
FDX.TImestamp Rate 16000000. // <- your core's frequency here
FDX.TImestamp Up
IF SIMULATOR()
	FDX.TImestamp OFF
FDX.SIZE 10000.
FDX.Mode Stack
FDX.Mode Compress OFF
FDX.AutoArm	ON
FDX.OFF
Trace.METHOD FDX
Break.Set T32_Fdx_Waiting /Program /CMD "wait 200.ms" /RESUME
SCREEN.ALways

IF Analyzer()
(
	Analyzer.Init
	Analyzer.CLOCK 16.MHz
	Analyzer.Mode Stack
	Analyzer.AutoArm ON
)

WinPOS 0% 0% 100% 40%
List.auto

WinPOS 0% 40% 70% 30%
FDX.List

WinPOS 0% 70% 70% 30%
FDX.Chart.sYmbol

WinPOS 71% 45%
FDX.state

ENDDO