; --------------------------------------------------------------------------------
; @Title: Simple demo script for XMC4700-X2048 on XMC4700 Relax Kit (RAM)
; @Description:
;   Loads the sieve demo application into RAM and sets up a demo debug
;   scenario.
;   Use this script for getting started.
;   Prerequisites:
;    * X100 for power via micro USB
;    * X102 for connecting the debug cable using LA-3770
;      or
;      X102 for connecting Combiprobe/uTrace     
;    * IMPORTANT: X102 is not 100% MIPI compliant. Pin 7 (key pin) and 
;                 pin 8 (TDI) have to be bend down or better removed.
; @Keywords: ARM, Cortex-M4
; @Author: AME
; @Board: XMC4700 Relax Kit
; @Chip: XMC4700*
; @Copyright: (C) 1989-2016 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: xmc4700_relax_kit_sieve_sram.cmm 10999 2017-06-22 14:55:33Z amerkle $


WinCLEAR

; --------------------------------------------------------------------------------
; initialize and start the debugger
RESet
SYStem.RESet
SYStem.CPU XMC4700-X2048
SYStem.CONFIG.DEBUGPORTTYPE SWD
IF hardware.COMBIPROBE()||hardware.UTRACE()
(
  SYStem.CONFIG.CONNECTOR MIPI20T
)
SYStem.Option DUALPORT ON
SYStem.MemAccess DAP
SYStem.JtagClock CTCK 10MHz
SYStem.Up

; --------------------------------------------------------------------------------
; load demo program (uses internal RAM only)
Data.LOAD.Elf "~~~~/sieve_ram_thumb_ii_v7m.elf"

; --------------------------------------------------------------------------------
; start program execution
Go.direct main
WAIT !STATE.RUN()

; --------------------------------------------------------------------------------
; open some windows
WinCLEAR
Mode.Hll
WinPOS 0. 0.
List.auto
WinPOS 120. 0. 100. 8.
Frame.view
WinPOS 120. 14.
Var.Watch
Var.AddWatch %SpotLight ast flags
WinPOS 120. 25.
Register.view /SpotLight
WinPOS 0. 32.
Var.DRAW %DEFault sinewave

ENDDO