; --------------------------------------------------------------------------------
; @Title: Example for flash declaration of Toshiba TMPM33x internal flash. 
;
; @Description: 
; Script arguments:
;
;   DO tmpm33x [PREPAREONLY] [CPU=<cpu>] [DUALPORT=0|1]
;
;     PREPAREONLY only declares flash but does not execute flash programming
;             example
;
;     CPU=<cpu> selects CPU derivative <cpu>
;
;     DUALPORT default value is 0 (disabled). If DualPort mode is enabled
;             flash algorithm stays running until flash programming is
;             finished. Data is tranferred via dual port memory access. 
;
; Example:
;
;   DO ~~/demo/arm/flash/tmpm33x CPU=TMPM330FD DUALPORT=1 PREPAREONLY
;
; List of TMPM33x derivatives and their configuration:
;
;   CPU-Type        Flash size   SRAM size   Page size
;                     [Byte]       [Byte]      [Byte]
; --------------------------------------------------------------------------------
;   TMPM330FD        0x80000      0x8000       0x200
;   TMPM330FY        0x40000      0x4000       0x200
;   TMPM330FW        0x20000      0x2000       0x100
;   TMPM332FW        0x20000      0x2000       
;
; The internal flash is located at 0x00000000 (User boot mode)
;                               or 0x3F800000 (Single boot mode)
; The internal RAM is located at   0x20000000
; The BOOTROM is located at        0x00000000 (Single boot mode)
;
; @Author: WRD
; @Copyright: (C) 1989-2019 Lauterbach GmbH, licensed for use with TRACE32(R) only
; @Chip: TMPM33*
; --------------------------------------------------------------------------------
; $Rev: 7602 $
; $Id: tmpm33x.cmm 7602 2019-11-05 15:02:25Z bschroefel $

  LOCAL &parameters
  ENTRY %LINE &parameters

  LOCAL &param_prepareonly
  &param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)

  LOCAL &param_cpu
  IF VERSION.BUILD()>=29755.
    &param_cpu=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"CPU=","")

  LOCAL &param_dualport
  &param_dualport=0
  IF VERSION.BUILD.BASE()>=43441.
    &param_dualport=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"DUALPORT=","0")

  LOCAL &flashbase 
  LOCAL &flashsize
  LOCAL &flashdriver
  &flashdriver="tbd.bin"

  ; ------------------------------------------------------------------------------
  ; Setup CPU

  IF SYStem.MODE()<5
  (
    SYStem.RESet

    IF "&param_cpu"!=""
      SYStem.CPU &param_cpu
    IF !CPUIS(TMPM33*)
    (
      IF VERSION.BUILD()>=37389.
        SYStem.CPU TMPM33*
      ELSE
        SYStem.CPU TMPM330FD
    )

    SYStem.Option.EnReset OFF
    SYStem.Up
  )

  ; Disable watchdog
  Data.Set 0x40040000 %Long 0x00000000   ; disable timer
  Data.Set 0x40040004 %Long 0x000000B1   ; write key

  ; Setup flash base address depending on boot mode
  &flashbase=0x00000000

  ; ------------------------------------------------------------------------------
  ; Setup flash configuration depending on selected CPU.

  IF (CPUIS("TMPM330FD*"))
  (
    &flashsize=0x80000
    &flashdriver="~~/demo/arm/flash/long/tmpm330.bin"
  )
  ELSE IF (CPUIS("TMPM330FY*"))
  (
    &flashsize=0x40000
    &flashdriver="~~/demo/arm/flash/long/tmpm330.bin"
  )
  ELSE IF (CPUIS("TMPM330FW*")||CPUIS("TMPM332FW*"))
  (
    &flashsize=0x20000
    &flashdriver="~~/demo/arm/flash/long/tmpm330fw.bin"
  )
  ELSE
  (
    PRINT %ERROR "FLASH size of CPU type is unknown"
    ENDDO
  )

  ; ------------------------------------------------------------------------------
  ; Flash declaration

  FLASH.RESet

  IF &flashsize==0x20000
  (
    FLASH.Create 1. (&flashbase+0x00000)++0x07FFF 0x04000 TARGET Long
    FLASH.Create 1. (&flashbase+0x08000)++0x07FFF 0x08000 TARGET Long
    FLASH.Create 1. (&flashbase+0x10000)++0x0FFFF 0x10000 TARGET Long
  )
  ELSE IF &flashsize==0x40000
  (
    FLASH.Create 1. (&flashbase+0x00000)++0x0FFFF 0x08000 TARGET Long
    FLASH.Create 1. (&flashbase+0x10000)++0x0FFFF 0x10000 TARGET Long
    FLASH.Create 1. (&flashbase+0x20000)++0x1FFFF 0x20000 TARGET Long
  )
  ELSE IF &flashsize==0x80000
  (
    FLASH.Create 1. (&flashbase+0x00000)++0x0FFFF 0x08000 TARGET Long
    FLASH.Create 1. (&flashbase+0x10000)++0x0FFFF 0x10000 TARGET Long
    FLASH.Create 1. (&flashbase+0x20000)++0x5FFFF 0x20000 TARGET Long
  )
  ELSE
  (
    PRINT %ERROR "Flash size is not supported by the script"
    ENDDO
  )

  IF &param_dualport==0
    FLASH.TARGET 0x20000400 0x20000C00 0x1000 &flashdriver
  ELSE
    FLASH.TARGET 0x20000400 EAHB:0x20000C00 0x1000 &flashdriver /DualPort

  ; Flash script ends here if called with parameter PREPAREONLY
  IF &param_prepareonly
    ENDDO PREPAREDONE

  ; ------------------------------------------------------------------------------
  ; Flash programming example

  DIALOG.YESNO "Program flash memory?"
  LOCAL &progflash
  ENTRY &progflash
  IF &progflash 
  (
    FLASH.ReProgram.ALL /Erase
    Data.LOAD.auto *
    FLASH.ReProgram.off

    ; Reset device
    SYStem.Down
    SYStem.Up
  )

  ENDDO