; --------------------------------------------------------------------------------
; @Title: Example for flash declaration of Samsung S3FM02G internal flash 
;
; @Description: 
; Script arguments:
;
;   DO s3fm02g [PREPAREONLY]
;
;     PREPAREONLY only declares flash but does not execute flash programming
;
; Example:
;
;   DO ~~/demo/arm/flash/s3fm02g PREPAREONLY
;
; Memory ranges:
;
;   384 kByte program flash at 0x00000000--0x0005ffff
;    16 kByte data flash at    0x80000000--0x80003fff
;    24 kByte internal RAM at  0x20000000--0x20005fff
;
; @Author: WRD
; @Copyright: (C) 1989-2019 Lauterbach GmbH, licensed for use with TRACE32(R) only
; @Chip: S3FM02G
; --------------------------------------------------------------------------------
; $Rev: 7602 $
; $Id: s3fm02g.cmm 7602 2019-11-05 15:02:25Z bschroefel $


  LOCAL &parameters
  ENTRY %LINE &parameters

  LOCAL &param_prepareonly
  &param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)
  ; --------------------------------------------------------------------------------
  ; CPU setup

  IF SYStem.MODE()<5
  (
    SYStem.RESet
    SYStem.CPU S3FM02G
    IF CABLE.TWOWIRE()
    (
      SYStem.CONFIG.DEBUGPORTTYPE SWD
    )
    SYStem.Up
  )

  ; Enable all peripheral clocks
  Data.Set 0x40020010 %Long 0xffffffff     ; CM_PCSR0
  Data.Set 0x40020014 %Long 0x000003ff     ; CM_PCSR1

  ; Disable watchdog
  Data.Set 0x4003000c %Long 0x00002340     ; WDT_OMR

  ; Change System Clock to IMCLK(20Mhz):
  ; Enable Internal Main Clock
  Data.Set 0x40020008 %Long 0x00000002                             ; CM_CSR: IMCLK=1
  ; Wait for stable clock
  IF !&param_prepareonly
  (
    WAIT (Data.Long(SD:0x40020040)&0x00000002)==0x00000002           ; wait for CM_SR: IMCLK==1
  )
  ; Select IMCLK for SYSCLK
  Data.Set 0x4002002C %Long 0yXxxxXxxxXxxxXxxxXxxxXxxxXxxxX011     ; CM_MR1: SYSCLK=IMCLK
  ; Wait for stable clock
  IF !&param_prepareonly
  (
    WAIT (Data.Long(SD:0x40020040)&0x00000010)==0x00000010           ; wait for CM_SR: STABLE==1
  )
  ; Set SYSCLK and Peripheral Clock divider
  Data.Set 0x40020044 %Long 0xacdc0000                             ; CM_SDCR: SDIV=0
  Data.Set 0x40020048 %Long 0xa3c50000                             ; CM_PDCR: PDIV=0

  ; Enable Program Flash Clock
  Data.Set 0x40010004 %Long 0x00000001                             ; PF_CEDR: CLKEN=1
  ; Perform Program Flash Controller Software Reset operation
  Data.Set 0x40010008 %Long 0x00000001                             ; PF_SRR: SWRST=1
  ; Program Flash Read Wait Setting to 3 Wait Cycle
  Data.Set 0x40010010 %Long 0yXxxxXxxxXxxxXxxxXxxxXxx1Xx10Xxxx     ; PF_MR: PBUFEN=1, WAIT=0y10

  ; Enable Data Flash Clock
  Data.Set 0x40011004 %Long 0x00000001                             ; DF_CEDR: CLKEN=1
  ; Perform Data Flash Controller Software Reset operation
  Data.Set 0x40011008 %Long 0x00000001                             ; DF_SRR: SWRST=1
  ; Data Flash Read Wait Setting to 7 Wait Cycle
  Data.Set 0x40011010 %Long 0yXxxxXxxxXxxxXxxxXxxxXxxxXxxx0111     ; DF_MR: WAIT=0y0111

  ; --------------------------------------------------------------------------------
  ; Flash declaration

  FLASH.RESet
  
  ; Program flash
  FLASH.Create 1. 0x00000000--0x0005ffff 0x8000 TARGET Long
  ; Data flash
  FLASH.Create 2. 0x80000000--0x80003fff 0x0400 TARGET Byte
  
  FLASH.TARGET 0x20000000 0x20001000 0x1000 ~~/demo/arm/flash/long/s3fm02g.bin

  ; Flash script ends here if called with parameter PREPAREONLY
  IF &param_prepareonly
    ENDDO PREPAREDONE
  
  ; --------------------------------------------------------------------------------
  ; Flash programming example

  DIALOG.YESNO "Program flash memory?"
  LOCAL &progflash
  ENTRY &progflash
  IF &progflash 
  (
    FLASH.ReProgram.ALL /Erase
    Data.LOAD.auto *
    FLASH.ReProgram.off

    ; Reset device
    SYStem.Down
    SYStem.Up
  )

  ENDDO