; --------------------------------------------------------------------------------
; @Title: Xilinx PELE SPI EEPROM Programming Script
; @Description:
; EEPROM(MICROCHIP, 25AA640) is connected to the ss0
; 
; S(D)RAM: 0x00001000
; SPI Tx Register : 0xE000601C   
; SPI Rx Register : 0xE0006020   
; SPI CS Register : 0xE0006000
;
; @Author: jjeong
; @Chip: ZYNQ-7000
; @Keywords: MICROCHIP 25AA640 SPI
; @Copyright: (C) 1989-2019 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: pele-spi16ee.cmm 7605 2019-11-05 16:45:28Z bschroefel $

LOCAL &arg1
ENTRY &arg1
&arg1=STRing.UPpeR("&arg1")  // for example "PREPAREONLY"


  WinCLEAR

  SYStem.RESet
  SYStem.CPU ZYNQ-7000
  CORE.ASSIGN 1             ; second core: "2", both (SMP): "1,2"

  TrOnchip.Set.DABORT OFF
  TrOnchip.Set.PABORT OFF
  TrOnchip.Set.UNDEF OFF
  SYStem.Option DACR ON
 
  Trace.METHOD.Onchip

  SYStem.Mode Attach
  IF STATE.RUN()
    Break.direct

  Data.Set ZSD:0xE0006014 %LE %Long 0x0     ; Disable SPI
  Data.Set ZSD:0xE0006000 %LE %Long 0xB829  ; Configuration SPI, SS0, 8bits, Master Mode
  Data.Set ZSD:0xE0006008 %LE %Long 0xFF    ; Enable SPI Interuppt 
  Data.Set ZSD:0xE0006014 %LE %Long 0x1     ; Enable SPI

  FLASHFILE.RESet

//FLASFILE.CONFIG  <TXDATA Reg>    <RXDATA Reg>      <CONREG >
  FLASHFILE.CONFIG 0xE000601C      0xE0006020        0xE0006000
//FLASHFILE.TARGET <code range>        <data range>        <algorithm file>
  FLASHFILE.TARGET 0x00001000++0x3FFF  0x00005000++0x21FF  ~~/demo/arm/flash/byte/spi16ee_pele.bin 

  FLASHFILE.GETID

//End of the test prepareonly
IF "&arg1"=="PREPAREONLY"
ENDDO


//Dump window for Serial FLASH
  FLASHFILE.DUMP 0x0

//Write Serial FLASH
  FLASHFILE.Erase 0x0--0x1FFF

//Write Serial FLASH
  FLASHFILE.LOAD.binary  * 0x0
  ;FLASHFILE.LOAD  * 0x0  /CP

ENDDO