; --------------------------------------------------------------------------------
; @Title: Example for flash declaration of FREESCALE MAC57D54H internal flash
; @Description:
;   Script arguments:
;
;    DO olea [PREPAREONLY] [CPU=<cpu>]
;
;      PREPAREONLY only declares flash but does not execute flash programming
;
;      CPU=<cpu> selects CPU derivative <cpu>
;
;   Example:
;
;   DO ~~/demo/arm/flash/mac57d54h CPU=MAC57D54H-CM4 PREPAREONLY
;
;   List of MAC57D54H derivatives and their configuration:
;
;     CPU-Type        Flash size   Page size
;                       [Byte]      [Byte]
;    MAC57D54H         0x400000      0x20
;
; @Author: FLC
; @Copyright: (C) 1989-2019 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Rev: 7602 $
; $Id: mac57d54h.cmm 7602 2019-11-05 15:02:25Z bschroefel $


  LOCAL &parameters
  ENTRY %LINE &parameters

  LOCAL &param_prepareonly &param_cpu
  &param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)
  &param_cpu=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"CPU=","")

  ; ------------------------------------------------------------------------------
  ; Setup CPU

  IF SYStem.MODE()<5
  (
    SYStem.RESet

    IF "&param_cpu"!=""
      SYStem.CPU &param_cpu
    IF !CPUIS(MAC57D54H*)
      SYStem.CPU MAC57D54H*

    SYStem.Option.ResBreak OFF
    SYStem.Up
  )

  GOSUB DisableWatchdog

  ; ------------------------------------------------------------------------------
  ; Flash declaration

  FLASH.RESet
  GOSUB FlashDeclaration

  ; Flash script ends here if called with parameter PREPAREONLY
  IF &param_prepareonly
    ENDDO PREPAREDONE

 ; -------------------------------------------------------------------------------
  ; Flash programming example

  DIALOG.YESNO "Program flash memory?"
  LOCAL &progflash
  ENTRY &progflash
  IF &progflash
  (
    FLASH.ReProgram.ALL
    Data.LOAD.auto *
    FLASH.ReProgram.off

    ; Reset device
    SYStem.Down
    SYStem.Up
  )

  ENDDO


; --------------------------------------------------------------------------------
; Flash declaration depending on selected CPU

FlashDeclaration:
  LOCAL &FlashSize &FlashDriver

  ; Low address space
  FLASH.Create 1. 0x18404000--0x18407FFF  0x4000 NOP    Quad 0x0000 /INFO "BAF (read only)"
  FLASH.Create 1. 0x18FA0000--0x18FAFFFF  0x4000 TARGET Quad 0x0001 /AutoInc
  FLASH.Create 1. 0x18F9C000--0x18F9FFFF  0x4000 TARGET Quad 0x0005
  FLASH.Create 1. 0x18FB0000--0x18FBFFFF  0x8000 TARGET Quad 0x0006 /AutoInc
  FLASH.Create 1. 0x18FC0000--0x18FFFFFF 0x10000 TARGET Quad 0x0008 /AutoInc
  ; Mid address space
  FLASH.Create 2. 0x00800000--0x00803FFF  0x4000 NOP    Quad 0x0100 /INFO "CSE Block0"
  FLASH.Create 2. 0x18808000--0x18813FFF  0x4000 TARGET Quad 0x0101 /AutoInc /INFO "EEPROM"
  FLASH.Create 2. 0x00804000--0x00807FFF  0x4000 NOP    Quad 0x0104 /INFO "CSE Block1"
  FLASH.Create 2. 0x18814000--0x1881FFFF  0x4000 TARGET Quad 0x0105 /AutoInc /INFO "EEPROM"
  FLASH.Create 2. 0x18820000--0x1883FFFF 0x10000 TARGET Quad 0x0108 /AutoInc /INFO "EEPROM"
  ; 256k address space
  FLASH.Create 4. 0x19000000--0x190BFFFF 0x40000 TARGET Quad 0x0300 /AutoInc
  FLASH.Create 4. 0x19180000--0x1927FFFF 0x40000 TARGET Quad 0x0303 /AutoInc
  FLASH.Create 4. 0x190C0000--0x1917FFFF 0x40000 TARGET Quad 0x0307 /AutoInc
  FLASH.Create 4. 0x19280000--0x1937FFFF 0x40000 TARGET Quad 0x030A /AutoInc
  ; UTEST address space
  FLASH.Create 6. 0x18400000--0x18403FFF  0x4000 TARGET Quad 0x0500 /OTP /INFO "UTEST"

  FLASH.TARGET 0x3F000000 0x3F002000 0x1000 ~~/demo/arm/flash/quad/c55fmhalo.bin

  RETURN


DisableWatchdog:
  Data.Set 0x40088010 %Long 0x0000C520   ; key
  Data.Set 0x40088010 %Long 0x0000D928   ; key
  Data.Set 0x40088000 %Long 0xFF00010A
  RETURN