; --------------------------------------------------------------------------------
; @Title: Example for flash declaration of NXP LPC23xx internal flash.
;
; @Description:
;
; Script arguments:
;
;  DO lpc23xx [PREPAREONLY]
;
;   PREPAREONLY only declares flash but does not execute flash programming
;
; Example:
;
;   DO ~~/demo/arm/flash/lpc23xx PREPAREONLY
;
; List of LPC23xx derivatives and their configuration:
;
;   CPU-Type  FlashSize  UserFlash  RamSize
;                (kB)      (kB)      (kB)
; --------------------------------------------------------------------------------
;   LPC2361       64.       64.        8.
;   LPC2362      128.      128.       32.
;   LPC2364      128.      128.        8.
;   LPC2365      256.      256.       32.
;   LPC2366      256.      256.       32.
;   LPC2367      512.      504.       32.
;   LPC2368      512.      504.       32.
;   LPC2377      512.      504.       32.
;   LPC2378      512.      504.       32.
;   LPC2387      512.      504.       64.
;   LPC2388      512.      504.       64.
;
; Boot flash size is 8 kB.
;
; HINTS:
;
;   With Trace32 software version build 17761 or higher and most recent
;   flash support package FLASH.CLocK.AUTO can be used for automatic 
;   flash clock measurement. With older Trace32 software flash module 
;   input clock has to be set with FLASH.CLocK <freq> command. Flash 
;   clock has to match System Clock Frequency (CCLK). 
;
;   Boot flash cannot be programmed or erased with builtin flash 
;   algorithm. 
;
;   Data has to be loaded to flash alignment to 256 Byte boundaries.
;
;   Vector table checksum generation is done by script, so that it 
;   can be used or switched off, as needed.
;
; @Author: WRD
; @Copyright: (C) 1989-2019 Lauterbach GmbH, licensed for use with TRACE32(R) only
; @Chip: LPC23*
; --------------------------------------------------------------------------------
; $Rev: 7616 $
; $Id: lpc23xx.cmm 7616 2019-11-08 07:18:24Z bschroefel $

  LOCAL &parameters
  ENTRY %LINE &parameters
  
  LOCAL &param_prepareonly
  &param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)

  ; ------------------------------------------------------------------------------
  ; Setup CPU and start debugging
  
  IF SYStem.MODE()<5
  (
    SYStem.RESet
    SYStem.CPU LPC2368
    SYStem.JtagClock RTCK
    IF VERSION.BUILD()<20711.
    (
      SYStem.Option ResBreak OFF
      SYStem.Option NOIRCHECK ON
      SYStem.Option BUGFIXV4 ON
    )
    SYStem.Up
  )

  ; ------------------------------------------------------------------------------
  ; Flash declaration

  FLASH.RESet
  FLASH.CLocK AUTO
  GOSUB FlashDeclaration &FlashSize &RAMSize
  
  ; Flash script ends here if called with parameter PREPAREONLY
  IF &param_prepareonly
    ENDDO PREPAREDONE 

  ; ------------------------------------------------------------------------------
  ; Flash programming example

  DIALOG.YESNO "Program flash memory?"
  LOCAL &progflash
  ENTRY &progflash
  IF &progflash 
  (
    ; Switch memory mapping to user flash mode, so that on-chip flash is 
    ; mapped to interrupt vectors. Memory Mapping Control Register 
    ; MEMMAP[1:0] = 01b
    Data.Set 0xe01fc040 %Byte 0x01

    ; Example for download 
    FLASH.ReProgram.ALL /Erase
    ; 1. Download file
    Data.LOAD.auto *
    ; 2. Checksum generation
    Data.Set 0x14 %Long 0x0          ;Zero the reserved vector's spot
    Data.SUM 0x0--0x1f /Long         ;Calculate checksum of all (other) vectors
    Data.Set 0x14 %Long -Data.SUM()  ;Write back the 2's complement in reserved vector's spot
    ; 3. Flash programming
    FLASH.ReProgram.off
  )

  ENDDO


; --------------------------------------------------------------------------------
; Flash declaration depending on configuration 

FlashDeclaration:
  LOCAL &cpu
  LOCAL &FlashSize
  LOCAL &RAMSize

  &cpu=SYStem.CPU()
  IF (("&cpu"=="LPC2387")||("&cpu"=="LPC2388"))
  (
    &FlashSize=512.
    &RAMSize=64.
  )
  ELSE IF (("&cpu"=="LPC2367")||("&cpu"=="LPC2368")||("&cpu"=="LPC2377")||("&cpu"=="LPC2378"))
  (
    &FlashSize=512.
    &RAMSize=32.
  )
  ELSE IF (("&cpu"=="LPC2365")||("&cpu"=="LPC2366"))
  (
    &FlashSize=256.
    &RAMSize=32.
  )
  ELSE IF (("&cpu"=="LPC2362"))
  (
    &FlashSize=128.
    &RAMSize=32.
  )
  ELSE IF (("&cpu"=="LPC2364"))
  (
    &FlashSize=128.
    &RAMSize=8.
  )
  ELSE IF (("&cpu"=="LPC2361"))
  (
    &FlashSize=64.
    &RAMSize=8.
  )
  ELSE 
  (
    PRINT %ERROR "FLASH size of CPU type is unknown"
    ENDDO
  )

  IF &FlashSize==64.
  (
    FLASH.Create 1. 0x00000--0x07fff 0x1000 TARGET Long
    FLASH.Create 1. 0x08000--0x0ffff 0x8000 TARGET Long 0x8000
  )
  ELSE IF &FlashSize==128.
  (
    FLASH.Create 1. 0x00000--0x07fff 0x1000 TARGET Long
    FLASH.Create 1. 0x08000--0x1ffff 0x8000 TARGET Long 0x8000
  )
  ELSE IF &FlashSize==256.
  (
    FLASH.Create 1. 0x00000--0x07fff 0x1000 TARGET Long
    FLASH.Create 1. 0x08000--0x3ffff 0x8000 TARGET Long 0x8000
  )
  ELSE IF &FlashSize==512.
  (
    FLASH.Create 1. 0x00000--0x07fff 0x1000 TARGET Long
    FLASH.Create 1. 0x08000--0x77fff 0x8000 TARGET Long 0x8000
    FLASH.Create 1. 0x78000--0x7dfff 0x1000 TARGET Long
  )
  ELSE
  (
    PRINT %ERROR "FLASH configuration is not supported by the script"
    ENDDO
  )

  FLASH.TARGET 0x40000000 0x40000800 0x1000 ~~/demo/arm/flash/long/lpc2130.bin
  
  RETURN