; --------------------------------------------------------------------------------
; @Title: TI DM6443 NAND FLASH Programming Script
; @Description:
; TI DM6443 NAND FLASH(Micron, MT29F2G08) is connected to CS2
;
; Internal SRAM    : 0x40000
; Command Register : 0x2000010  
; Address Register : 0x200000B
; Data Register    : 0x2000000
;
; @Author: jjeong
; @Chip: TMS320DM6443
; @Keywords: Micron MT29F2G08 FLASH NAND
; @Copyright: (C) 1989-2019 Lauterbach GmbH, licensed for use with TRACE32(R) only
; --------------------------------------------------------------------------------
; $Id: dm6443-nand2g08.cmm 7605 2019-11-05 16:45:28Z bschroefel $

LOCAL &arg1
ENTRY &arg1
&arg1=STRing.UPpeR("&arg1")  // for example "PREPAREONLY"


SYStem.RESet
SYStem.CPU DM6443
SYStem.JtagClock RTCK 1MHZ
SYStem.Mode Go
WAIT 5.s
IF STATE.RUN()
  Break.direct

; Disable WP by setting GPIO 51
Data.Set ASD:0x1C41A68 %Long 0x703 
Data.Set ASD:0x1C41868 %Long 0x1F03 
Data.Set ASD:0x1C67038 %Long 0yXXXXxxxxXXXX0xxxXXXXxxxxXXXXxxxx
Data.Set ASD:0x1C67040 %Long 0x80000 

;EMIF, CS2 Enable for NAND FLASH
PER.Set.simple ASD:0x1E00060 %Long 0x1       ; CS2 Enable
PER.Set.simple ASD:0x1E00010 %Long 00624388  ; CS2 bus timing

  FLASHFILE.RESet

//FLASHFILE.config <Cmd_reg>   <Addr_reg>  <Data_reg>
  FLASHFILE.CONFIG 0x2000010  0x200000B  0x2000000

//FLASHFILE.TARGET <Code_range> <Data_range> <Algorithm file>
  FLASHFILE.TARGET 0x40000++0x1FFF 0x42000++0x1FFF ~~/demo/arm/flash/byte/nand2g08.bin

//Read FLASH Manufacture and Device ID
  FLASHFILE.GETID

//End of the test prepareonly
IF "&arg1"=="PREPAREONLY"
ENDDO


//Put a list of bad blocks into area window
  FLASHFILE.GETBADBLOCK 0x0--0xFFFFF

  DIALOG.YESNO "Program flash memory?"
  ENTRY &progflash
  IF &progflash 
  (
  //Erase NAND FLASH Main and Bad block inforamtion
    FLASHFILE.Erase 0x0--0x7FFFFFF 
    ;FLASHFILE.ERASE 0x0--0x7FFFFFF  /EraseBadBlocks

  //Skipped way 
    FLASHFILE.LOAD.binary  * 0x0 
  )

//Open NAND FLASH Dump window
  FLASHFILE.DUMP 0x0

ENDDO