; --------------------------------------------------------------------------------
; @Title: I2C EEPROM Programming script for TI AM3359
; @Description:
; EEPROM(24LC32A) is connected to I2C0
;
; SRAM: 0x40300000
;
; I2C controller base : 0x44E0B000
;
; @Author: jjeong
; @Copyright: (C) 1989-2019 Lauterbach GmbH, licensed for use with TRACE32(R) only
; @Chip: AM3359
; @Keywords: I2C flash EEPROM
; --------------------------------------------------------------------------------
; $Id: am3359-i2c.cmm 7577 2019-10-30 15:30:31Z bschroefel $

SYStem.CPU AM3359
SYStem.Up

Data.Set C15:0x1 %Long  (Data.Long(C15:0x1)&~(0x1005))  ; disable cache and mmu

//Disable watchdog
Data.Set A:0x44E35048 %Long  0xAAAA
Data.Set A:0x44E35048 %Long  0x5555

//Enable OCM memory 
Data.Set A:0x44E0002C %Long 0x2

PER.Set.simple AD:0x44E00400 %Long 0x1E16  ;CM_WKUP_CLKSTCTRL
PER.Set.simple AD:0x44E004B8 %Long 0x2     ;CM_WKUP_I2C0_CLKCTRL
;PER.Set.simple AD:0x44E00044 %Long 0x2    ;I2C2_CLKCTRL
;PER.Set.simple AD:0x44E00048 %Long 0x2    ;I2C1_CLKCTRL

PER.Set.simple AD:0x44E10988 %Long 0x60  ;conf_i2c0_sda, Control_module register
PER.Set.simple AD:0x44E1098C %Long 0x60  ;conf_i2c0_scl

//I2C registers
PER.Set.simple AD:0x44E0B010 %Long 0x2   ;I2C reset
WAIT 10.ms

PER.Set.simple AD:0x44E0B0A8 %Long 0x1   ;I2C_OA
PER.Set.simple AD:0x44E0B0AC %Long 0x50  ;I2C_SA, slave address
PER.Set.simple AD:0x44E0B0B4 %Long 0x0A  ;I2C_SCLL  , <400khz
PER.Set.simple AD:0x44E0B0B8 %Long 0x0A  ;I2C_SCLH  , <400khz

PER.Set.simple AD:0x44E0B0A4 %Long 0x8602
PER.Set.simple AD:0x44E0B028 %Long 0xFFFF

  Break.RESet

  FLASHFILE.RESet
  
//FLASFILE.CONFIG  <i2c controller Reg>    <Slave addr>
  FLASHFILE.CONFIG 0x44E0B000              0x50

// FLASHFILE.TARGET <code range>        <data range>           <Algorithm file>
  FLASHFILE.TARGET 0x40300000++0x1FFF   0x40302000++0x1FFF    ~~/demo/arm/flash/byte/i2c32_omap.bin /KEEP 

  FLASHFILE.GETID

//FLASHFILE.ERASE 0x0++0xFFF
//FLASHFILE.LOAD * 0x0            ; Write
//FLASHFILE.LOAD * 0x0  /ComPare  ; Verify

  FLASHFILE.DUMP 0x0

ENDDO