; --------------------------------------------------------------------------------
; @Title: Example for flash declaration of Analog Devices ADuCM32x internal flash.
;
; @Description:
; DO aduc32x [PREPAREONLY] [CPU=<cpu>]
;
;     PREPAREONLY only declares flash but does not execute flash programming
;             example
;
;     CPU=<cpu> selects CPU derivative <cpu>
;
; Example:
;
;   DO ~~/demo/arm/flash/aducm32x CPU=ADuCM320 PREPAREONLY
;
; List of ADuCM32x derivatives and their configuration:
;
;   CPU-Type           Flash I      Flash II   Ram size
;                       (KB)          (KB)        (KB)
; --------------------------------------------------------------------------------
;   ADuCM320            128.           128.        32.
;   ADuCM322            128.           128.        32.
;
; Memory location:
;
;   Program flash starting at 0x00000000
;   SRAM starting at          0x20000000
;
; @Author: MAM
; @Copyright: (C) 1989-2019 Lauterbach GmbH, licensed for use with TRACE32(R) only
; @Chip: ADuCM32*
; --------------------------------------------------------------------------------
; $Rev: 7577 $
; $Id: aducm32x.cmm 7577 2019-10-30 15:30:31Z bschroefel $

  PRIVATE &parameters
  ENTRY %LINE &parameters

  PRIVATE &param_prepareonly &param_cpu
  &param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)
  &param_cpu=STRing.SCANAndExtract(STRing.UPpeR("&parameters"),"CPU=","")

  ; ------------------------------------------------------------------------------
  ; Start debugging

  IF SYStem.MODE()<5
  (
    SYStem.RESet

    IF "&param_cpu"!=""
      SYStem.CPU &param_cpu
    IF !CPUIS(ADUCM32*)
    (
        SYStem.CPU ADUCM320
    )

    SYStem.Option.ResBreak OFF
    SYStem.CONFIG.DEBUGPORTTYPE SWD

    SYStem.Up

    ; For the case CPU is in kernel mode because of empty flash. Initialize
    ; SRAM and disable single bit error interrupt.
    Data.Set 0x4000202C %Word 0yXXXXxxxxXXXXx101
  )


  ; ------------------------------------------------------------------------------
  ; Flash declaration
  PRIVATE &ram_start &flashDriverSize &bufferSize
  PRIVATE &flash0_start &flash1_start &flash2_start &flashsize &sectrorsize

  &ram_start=0x020000000  ; internal RAM: 0x20000000 (SRAM 32K)
  &flashDriverSize=0x1000 ; (<flash_algorithm>) + 32 byte
  &bufferSize=0x1000
  
  &flash0_start=0x0000000
  &flash1_start=0x0020000
  &flashsize=0x20000 // 128k flash size is the same for all onchip flashes.
  &sectrorsize=0x800 // 2k sector size 

  FLASH.RESet
  ; Program flash
  FLASH.Create 1. &flash0_start++(&flashsize-1) &sectrorsize TARGET Quad
  FLASH.Create 2. &flash1_start++(&flashsize-1) &sectrorsize TARGET Quad

  FLASH.TARGET &ram_start (&ram_start+&flashDriverSize) &bufferSize ~~/demo/arm/flash/quad/aducm320.bin

  ; Flash script ends here if called with parameter PREPAREONLY
  IF &param_prepareonly
    ENDDO PREPAREDONE

  ; ------------------------------------------------------------------------------
  ; Flash programming example

  DIALOG.YESNO "Program flash memory?"
  LOCAL &progflash
  ENTRY &progflash
  IF &progflash
  (
    FLASH.ReProgram.ALL /Erase
    Data.LOAD.auto *
    FLASH.ReProgram.off

    ; Reset device
    SYStem.Down
    SYStem.Up
  )

  ENDDO