; --------------------------------------------------------------------------------
; @Title: Example for flash declaration of Analog Devices ADuCM301 internal flash.
; 
; @Description:
; DO aducm301 [PREPAREONLY]
;
;     PREPAREONLY only declares flash but does not execute flash programming
;
; Example:
;
;   DO ~~/demo/arm/flash/aducm301 PREPAREONLY
;
; Memory location:
;
;   Program flash starting at 0x00000000
;   SRAM starting at          0x20000000
;
; @Author: WRD
; @Copyright: (C) 1989-2019 Lauterbach GmbH, licensed for use with TRACE32(R) only
; @Chip: ADuCM301
; --------------------------------------------------------------------------------
; $Rev: 7577 $
; $Id: aducm301.cmm 7577 2019-10-30 15:30:31Z bschroefel $

  LOCAL &parameters
  ENTRY %LINE &parameters

  LOCAL &param_prepareonly
  &param_prepareonly=(STRing.SCAN(STRing.UPpeR("&parameters"),"PREPAREONLY",0)!=-1)

  ; --------------------------------------------------------------------------------
  ; Start debugging

  IF SYStem.MODE()<5
  (
    SYStem.RESet
    SYStem.CPU ADUCM301
    SYStem.Option.ResBreak OFF
    SYStem.CONFIG.DEBUGPORTTYPE SWD
    SYStem.JtagClock 1MHz
    SYStem.Up
  )

  ; --------------------------------------------------------------------------------
  ; Flash declaration

  FLASH.RESet
  FLASH.Create 1. 0x00000000--0x0001FFFF 0x200 TARGET Long /KEEP 0x1FFEC--0x1FFFF
  FLASH.TARGET 0x20000000 0x20000800 0x400 ~~/demo/arm/flash/long/aducm360.bin

  ; Flash script ends here if called with parameter PREPAREONLY
  IF &param_prepareonly
    ENDDO PREPAREDONE

  ; --------------------------------------------------------------------------------
  ; Flash programming example

  DIALOG.YESNO "Program flash memory?"
  LOCAL &progflash
  ENTRY &progflash
  IF &progflash 
  (
    FLASH.ReProgram.ALL /Erase
    Data.LOAD.auto *
    FLASH.ReProgram.off

    ; Reset device
    SYStem.Down
    SYStem.Up
  )

  ENDDO