/** ###################################################################
**     Filename  : Events.C
**     Project   : MeasurementEngine
**     Processor : MC9S08MM128VLK
**     Component : Events
**     Version   : Driver 01.02
**     Compiler  : CodeWarrior HCS08 C Compiler
**     Date/Time : 1/13/2010, 3:45 PM
**     Abstract  :
**         This is user's event module.
**         Put your event handler code here.
**     Settings  :
**     Contents  :
**         ME1_OnConvComplete - void ME1_OnConvComplete(void);
**
**     Copyright Freescale Semiconductor, Inc. All Rights Reserved.
** ###################################################################*/
/* MODULE Events */


#include "Cpu.h"
#include "Events.h"

word resultA = 0,
     resultB = 0,
     resultC = 0,
     resultD = 0,
     resultE = 0,
     resultF = 0,
     resultG = 0,
     resultH = 0;
byte err, err_swtrig;

/* User includes (#include below this line is not maintained by Processor Expert) */

/*
** ===================================================================
**     Event       :  ME1_OnConvComplete (module Events)
**
**     Component   :  ME1 [MeasurementEngine]
**     Description :
**         This event is called after a A/D conversion is finished.
**         This event must be used together with <ADC_GetMeasuredValue>
**         method to achieve proper event handling, otherwise the event
**         will be invoked all the time. <ADC_GetConvCompleteStatus>
**         method can be used to read A/D conversion status. 
**         This event is enabled only if < ADC int. service/event>
**         property is enabled.
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
void ME1_OnConvComplete(void)
{
 
  if(ME1_ADC_GetConvCompleteStatus(ME1_TRIGGER_0H)){
    
    if(ME1_ADC_GetConvCompleteStatus(ME1_TRIGGER_0A)){
      err = ME1_ADC_GetMeasuredValue(ME1_TRIGGER_0A,&resultA); 
    }
    
    if(ME1_ADC_GetConvCompleteStatus(ME1_TRIGGER_0B)){
      err = ME1_ADC_GetMeasuredValue(ME1_TRIGGER_0B,&resultB); 
    }
    
    if(ME1_ADC_GetConvCompleteStatus(ME1_TRIGGER_0C)){
      err = ME1_ADC_GetMeasuredValue(ME1_TRIGGER_0C,&resultC); 
    }
    
    if(ME1_ADC_GetConvCompleteStatus(ME1_TRIGGER_0D)){
      err = ME1_ADC_GetMeasuredValue(ME1_TRIGGER_0D,&resultD); 
    }
    
    if(ME1_ADC_GetConvCompleteStatus(ME1_TRIGGER_0E)){
      err = ME1_ADC_GetMeasuredValue(ME1_TRIGGER_0E,&resultE); 
    }
    
    if(ME1_ADC_GetConvCompleteStatus(ME1_TRIGGER_0F)){
      err = ME1_ADC_GetMeasuredValue(ME1_TRIGGER_0F,&resultF); 
    }
    
    if(ME1_ADC_GetConvCompleteStatus(ME1_TRIGGER_0G)){
      err = ME1_ADC_GetMeasuredValue(ME1_TRIGGER_0G,&resultG); 
    }
    
    err = ME1_ADC_GetMeasuredValue(ME1_TRIGGER_0H,&resultH);   
  }
 
 
}

/*
** ===================================================================
**     Event       :  KB1_OnInterrupt (module Events)
**
**     Component   :  KB1 [KBI]
**     Description :
**         This event is called when the active signal edge/level
**         occurs. This event is enabled only if <Interrupt
**         service/event> property is enabled.
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
void KB1_OnInterrupt(void)
{
  
  err_swtrig = ME1_PDB_SWTrigger();
  
}

/* END Events */

/*
** ###################################################################
**
**     This file was created by Processor Expert 3.08 [04.39]
**     for the Freescale HCS08 series of microcontrollers.
**
** ###################################################################
*/