/*
** ###################################################################
**
**     Filename  : Events.C
**
**     Project   : InternalI2C
**
**     Processor : MC68HC908LD64IFU
**
**     Componenttype  : Events
**
**     Version   : Driver 01.00
**
**     Compiler  : Metrowerks HC08 C Compiler
**
**     Date/Time : 21.11.2002, 16:23
**
**     Abstract  :
**
**         This is user's event module.
**         Put your event handler code here.
**
**     Settings  :
**
**
**     Contents  :
**
**         I2C1_OnTransmitData - void I2C1_OnTransmitData(void);
**         Cpu_OnSwINT         - void Cpu_OnSwINT(void);
**
**
**     Copyright: 1997 - 2009 Freescale Semiconductor, Inc. All Rights Reserved.
**
**
**
**     http      : www.freescale.com
**     mail      : support@freescale.com
**
** ###################################################################
*/
/* MODULE Events */

#pragma MESSAGE DISABLE C1420 /* WARNING C1420: Result of function-call is ignored */


/*Including used modules for compilling procedure*/
#include "Cpu.h"
#include "Events.h"
#include "I2C1.h"

/*Include shared modules, which are used for whole project*/
#include "PE_Types.h"
#include "PE_Error.h"
#include "PE_Const.h"
#include "IO_Map.h"

extern byte done;

/*
** ===================================================================
**     Event       :  I2C1_OnTransmitData (module Events)
**
**     From Component   :  I2C1 [InternalI2C]
**     Description :
**         This event is invoked when I2C finishes the transmission
**         of the data successfully. This event is not available for
**         the SLAVE mode.
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
void I2C1_OnTransmitData(void)
{
  done = 1;
}

/*
** ===================================================================
**     Event       :  Cpu_OnSwINT (module Events)
**
**     From Component   :  Cpu [MC68HC908LD64]
**     Description :
**         This software event is called after software reset.
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
void Cpu_OnSwINT(void)
{
  /* Write your code here ... */
}

/*
** ===================================================================
**     Event       :  I2C1_OnNACK (module Events)
**
**     From Component   :  I2C1 [InternalI2C]
**     Description :
**         Called when no slave acknowledge (NAK) occurs during
**         communication. This event is not available for the SLAVE
**         mode.
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
void I2C1_OnNACK(void)
{
  /* Write your code here ... */
}

/* END Events */

/*
** ###################################################################
**
**     This file was created by Processor Expert 03.08 for
**     the Freescale HC08 series of microcontrollers.
**
** ###################################################################
*/