=============================================================================
List of generated methods in project: LCM

THIS TEXT DESCRIPTION IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
=============================================================================

Module "LCM1"      (Component FreescaleLCM)
   - LCM1_Enable -Enable the Component - it starts the signal generation. Events may be generated ("DisableEvent"/"EnableEvent").
   - LCM1_Disable -Disable the Component - it stops signal generation and events calling. When the timer is disabled, it is possible 
                to call methods "ClrValue" and "SetValue".
   - LCM1_SetPeriod -Setting of the period register of the LCM module.
   - LCM1_GetShtdwnVal -Returns the current logic level of the Shutdown pin.
   - LCM1_SetFreqHz -This method sets the new frequency of the output signal. The frequency is expressed in [Hz] as a 16-bit 
                unsigned integer number. This method is available only if runtime setting type 'from interval' is selected in 
                the <Timing dialog box> in Runtime setting area.

Module "Cpu"       (Component MC68HC908LB8)
   - Cpu_GetSpeedMode -Gets the current speed mode
   - Cpu_EnableInt -Enables maskable interrupts
   - Cpu_DisableInt -Disables maskable interrupts

===================================================================================