=============================================================================
List of generated methods in project: AnalogModule

THIS TEXT DESCRIPTION IS GENERATED BY THE TOOL. DO NOT MODIFY IT.
=============================================================================

Module "AnM1"      (Component FreescaleAnalogModule)
   - AnM1_Enable -Enable Analog module Component. Events may be generated ("DisableEvent"/"EnableEvent").
   - AnM1_Disable -Disable Analog module Component. No events will be generated.
   - AnM1_EnableEvent -Enable the events.
   - AnM1_DisableEvent -Disable the events.
   - AnM1_SetChannel -This method selects the channel that specifies one of several possible analog module sources.
   - AnM1_SetGain -Set the two gains for the two-stage amplifier.
   - AnM1_GetLevel -This method returns the comparator output level. The comparator comparing 2-stage amplifier output with 
                internal reference.
   - AnM1_GetAmpState -If the output of the 2-stage amplifier is settled, this method returns true. If it is not settled, the 
                method returns false.
   - AnM1_GetCurrentDetectFlag -If the voltage developed across the sense resistor is equal to or greater than the current 
                sense amplifier comparator trip voltage (typically -9mV), this method returns true. Otherwise returns false.

Module "AD1"       (Component ADC)
   - AD1_Measure -This method performs one measurement on all channels that are set in the Component inspector. (Note: If the 
                <number of conversions> is more than one the conversion of A/D channels is performed specified number of times.)
   - AD1_GetValue -Returns the last measured values for all channels.

Module "Cpu"       (Component MC68HC908SR12_42)
   - Cpu_GetSpeedMode -Gets the current speed mode
   - Cpu_EnableInt -Enables maskable interrupts
   - Cpu_DisableInt -Disables maskable interrupts

===================================================================================