/*
** ###################################################################
**
**     Filename  : Events.C
**
**     Project   : FreescaleAnalogModule
**
**     Processor : MC68HC908SR12CB
**
**     Componenttype  : Events
**
**     Version   : Driver 01.00
**
**     Compiler  : Metrowerks HC08 C Compiler
**
**     Date/Time : 21.11.2002, 15:18
**
**     Abstract  :
**
**         This is user's event module.
**         Put your event handler code here.
**
**     Settings  :
**
**
**     Contents  :
**
**         AnM1_OnAmpReady      - void AnM1_OnAmpReady(void);
**         AnM1_OnCurrentDetect - void AnM1_OnCurrentDetect(void);
**         AD1_OnEnd            - void AD1_OnEnd(void);
**         Cpu_OnSwINT          - void Cpu_OnSwINT(void);
**
**
**     Copyright: 1997 - 2009 Freescale Semiconductor, Inc. All Rights Reserved.
**
**
**
**     http      : www.freescale.com
**     mail      : support@freescale.com
**
** ###################################################################
*/
/* MODULE Events */

#pragma MESSAGE DISABLE C1420 /* WARNING C1420: Result of function-call is ignored */


/*Including used modules for compilling procedure*/
#include "Cpu.h"
#include "Events.h"
#include "AnM1.h"
#include "AD1.h"

/*Include shared modules, which are used for whole project*/
#include "PE_Types.h"
#include "PE_Error.h"
#include "PE_Const.h"
#include "IO_Map.h"

/*
** ===================================================================
**     Event       :  AnM1_OnAmpReady (module Events)
**
**     From Component   :  AnM1 [FreescaleAnalogModule]
**     Description :
**         This event is invoked when the 2-stage amplifier settle.
**         (only when the Component is enabled - "Enable" and the events
**         are enabled - "EnableEvent")
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
void AnM1_OnAmpReady(void)
{
  /* Write your code here ... */
}

/*
** ===================================================================
**     Event       :  AnM1_OnCurrentDetect (module Events)
**
**     From Component   :  AnM1 [FreescaleAnalogModule]
**     Description :
**         This event is invoked when the voltage developed across
**         the sense resistor reach to the current sense amplifier
**         comparator trip voltage (typically -9mV). (only when the
**         Component is enabled - "Enable" and the events are enabled -
**         "EnableEvent")
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
void AnM1_OnCurrentDetect(void)
{
  /* Write your code here ... */
}


/*
** ===================================================================
**     Event       :  AD1_OnEnd (module Events)
**
**     From Component   :  AD1 [ADC]
**     Description :
**         This event is called after a measurements (which consists
**         of 1 or more conversions) is finished.
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
void AD1_OnEnd(void)
{
  /* Write your code here ... */
}


/*
** ===================================================================
**     Event       :  Cpu_OnSwINT (module Events)
**
**     From Component   :  Cpu [MC68HC908SR12_42]
**     Description :
**         This software event is called after software reset.
**     Parameters  : None
**     Returns     : Nothing
** ===================================================================
*/
void Cpu_OnSwINT(void)
{
  /* Write your code here ... */
}

/* END Events */

/*
** ###################################################################
**
**     This file was created by Processor Expert 03.08 for
**     the Freescale HC08 series of microcontrollers.
**
** ###################################################################
*/