CPU documentation - General info

Clock settings - MCU Clock settings
- Oscillator frequency [MHz] - Frequency of the main crystal or the external clock. The frequency should be 24MHz.
- Clock input pin - Clock input properties.
  - Pin name - Clock input pin name (for information only).
- Clock output pin - Clock output properties.
  - Pin name - Clock output pin name (for information only).
- Internal bus clock - The internal bus clock [MHz].
- Low-power modes settings - Low-power modes settings.
  - STOP instruction enabled - STOP instruction enabled
    The following items are available only if the group is enabled (the value is "Enabled"):
    - Recovery from Stop Mode after - This property enables the CPU to exit the stop mode with a delay of 32 CGMXCLK cycles instead of a 4096 CGMXCLK cycle delay.
- CPU mode selection - CPU mode. This property is necessary for the correct CPU's internal timing.
  There are 2 modes:
  - Monitor mode - The following items are displayed in this mode:
    - PTC3 pin level - Logical value of PTC3 pin. The value on this pin is used by the processor when entering Monitor mode. For details see the datasheet of a particular device.
  - User mode - There are no items in this mode.
Maskable CPU interrupts - Enable/disable CPU maskable interrupts. This item modifies Interrupt Mask Bit I in Condition Code CPU register CCR.
CPU interrupts - Interrupts allocated by CPU bean
- Reset vector - Reset vector settings.
  - Interrupt - Interrupt associated with the reset vector (for information only)
  - ISR name - Name of the reset vector - routine, that initializes CPU after reset.
- SWI - This property enables/disables generation of SWI interrupt service routine.
  The following items are available only if the group is enabled (the value is "Enabled"):
  - Interrupt - Software Interrupt (for information only)
  - ISR name - Name of the interrupt service routine (ISR) invoked by this interrupt vector.
    The user code of the routine should handle all respective interrupt flags correctly.

PROCESSOR EXPERT is trademark of Freescale Semiconductor, Inc.
Copyright 1997 - 2010 Freescale Semiconductor, Inc.