| Init_TRIAMP | |
|
|
Component
Init_TRIAMP for HCS08
Trans-Impedance Amplifier
Device Initialization
(Description of the component parameters.)
- Device - TRIAMP Device module
-
Settings - Common TRIAMP module settings
-
Power mode - This item selects the power-level mode.
There are 2 options:
- High-speed: High-speed mode
- Low-power: Low-power mode
-
Power mode - This item selects the power-level mode.
-
Pins - Module pins settings.
-
Positive Input - Setting of the positive input pin.
- Pin - Positive input pin of the TRIAMP module.
-
Negative Input - Setting of the negative input pin.
- Pin - Negative input pin of the TRIAMP module.
-
Output - Setting of the output pin.
- Pin - Output pin of the TRIAMP module.
-
Positive Input - Setting of the positive input pin.
-
Initialization - Initialization options of the module
-
Module enable - Enables the TRIAMP module.
There are 2 options:
- yes: Trans-Impedance Amplifier system is enabled.
- no: The amplifier is disabled and not powered.
-
Module enable - Enables the TRIAMP module.