Component documentation

Component name - Name of the component.
Device - PDB Device module
Settings - Common PDB module settings
- Setting supported for MCF51AG128_64 MCF51AG128_80 MCF51JE128_80 MCF51JE128_81 MCF51JE256_100 MCF51JE256_104 MCF51JE256_80 MCF51JE256_81 MCF51MM128_80 MCF51MM128_81 MCF51MM256_100 MCF51MM256_104 MCF51MM256_80 MCF51MM256_81 MC9S08JE128_64 MC9S08JE128_80 MC9S08JE128_81 MC9S08MM128_64 MC9S08MM128_80 MC9S08MM128_81 MC9S08MP12_28 MC9S08MP16_28 MC9S08MP16_32_LQFP MC9S08MP16_48 only
  - Load Mode - Load mode select
    
    There are 2 options:
    - Synchronized: PDBxDLYAH, PDBxDLYAL, PDBxDLYBH, PDBxDLYBL, PDBxMODH, and PDBxMODL registers are loaded into a set of buffers and take effect when the counter rolls over in continuous mode or trigger signal is received in one shot mode after logic 1 is written into LDOK bit
    - Immediate: PDBxDLYAH, PDBxDLYAL, PDBxDLYBH, PDBxDLYBL,PDBxMODH, and PDBxMODL registers are loaded into a set of buffers and take effect immediately after logic 1 is written into LDOK bit
- Channel 1 - Channel 1 settings.
  - Setting supported for MCF51JE128_80 MCF51JE128_81 MCF51JE256_100 MCF51JE256_104 MCF51JE256_80 MCF51JE256_81 MCF51MM128_80 MCF51MM128_81 MCF51MM256_100 MCF51MM256_104 MCF51MM256_80 MCF51MM256_81 MC9S08JE128_64 MC9S08JE128_80 MC9S08JE128_81 MC9S08MM128_64 MC9S08MM128_80 MC9S08MM128_81 only
    - Output select - Channel 1 Trigger A-H Output Select.
      
      There are 3 options:
      - bypassed: Counter delay A is bypassed
      - Trigger A only: Trigger A is function of Channel 1 Trigger delay A only
      - OR function: Trigger A is OR function of all available channel outputs
  - Trigger A - Trigger A Settings.
    - Settings supported only if the selected PDB module supports Trigger Enable.
      - Trigger enable - Trigger A Enable/Disable.
    - Setting supported for MCF51AG128_64 MCF51AG128_80 MCF51EM128_100 MCF51EM128_80 MCF51EM256_100 MCF51EM256_80 MC9S08MP12_28 MC9S08MP16_28 MC9S08MP16_32_LQFP MC9S08MP16_48 only
      - Settings supported only if the selected PDB module supports Output Enable.
        
        Output select - Channel 1 Trigger A Output Select.
        
        There are 4 options:
        
        bypassed: bypassed
        
        Delay A only: Delay A only
        
        Delay A and Delay B: Delay A and Delay B
        
        PulseOut: PulseOut
    - Setting supported for MCF51MM128_80 MCF51MM128_81 MCF51MM256_100 MCF51MM256_104 MCF51MM256_80 MCF51MM256_81 MC9S08MM128_64 MC9S08MM128_80 MC9S08MM128_81 only
      - Back to Back - Trigger A Back to Back operation.
    - Trigger delay value - This property is used to specify the delay from assertion of input trigger defined in Input trigger select property to assertion of Trigger A.
    - Trigger delay - Trigger delay (for information only). This item is influenced by the following properties: Prescaler, Delay.
  - Setting supported for MCF51AG128_64 MCF51AG128_80 MCF51EM128_100 MCF51EM128_80 MCF51EM256_100 MCF51EM256_80 MCF51MM128_80 MCF51MM128_81 MCF51MM256_100 MCF51MM256_104 MCF51MM256_80 MCF51MM256_81 MC9S08MM128_64 MC9S08MM128_80 MC9S08MM128_81 MC9S08MP12_28 MC9S08MP16_28 MC9S08MP16_32_LQFP MC9S08MP16_48 only
    - Trigger B - Trigger B Settings.
      - Settings supported only if the selected PDB module supports Trigger Enable.
        
        Trigger enable - Trigger B Enable/Disable.
      - Setting supported for MCF51AG128_64 MCF51AG128_80 MCF51EM128_100 MCF51EM128_80 MCF51EM256_100 MCF51EM256_80 MC9S08MP12_28 MC9S08MP16_28 MC9S08MP16_32_LQFP MC9S08MP16_48 only
        
        Settings supported only if the selected PDB module supports Output Enable.
        
        Output select - Channel 1 Trigger B Output Select.
        
        There are 4 options:
        
        bypassed: bypassed
        
        Delay B only: Delay B only
        
        Delay A and Delay B: Delay A and Delay B
        
        PulseOut: PulseOut
      - Setting supported for MCF51MM128_80 MCF51MM128_81 MCF51MM256_100 MCF51MM256_104 MCF51MM256_80 MCF51MM256_81 MC9S08MM128_64 MC9S08MM128_80 MC9S08MM128_81 only
        
        Back to Back - Trigger B Back to Back operation.
      - Trigger delay value - This property is used to specify the delay from assertion of input trigger defined in Input trigger select property to assertion of Trigger B.
      - Trigger delay - Trigger delay (for information only). This item is influenced by the following properties: Prescaler, Delay.
  - Setting supported for MCF51MM128_80 MCF51MM128_81 MCF51MM256_100 MCF51MM256_104 MCF51MM256_80 MCF51MM256_81 MC9S08MM128_64 MC9S08MM128_80 MC9S08MM128_81 only
    - Trigger C - Trigger C Settings.
      - Trigger enable - Trigger C Enable/Disable.
      - Back to Back - Trigger C Back to Back operation.
      - Trigger delay value - This property is used to specify the delay from assertion of input trigger defined in Input trigger select property to assertion of Trigger C.
      - Trigger delay - Trigger delay (for information only). This item is influenced by the following properties: Prescaler, Delay.
    - Trigger D - Trigger D Settings.
      - Trigger enable - Trigger D Enable/Disable.
      - Back to Back - Trigger D Back to Back operation.
      - Trigger delay value - This property is used to specify the delay from assertion of input trigger defined in Input trigger select property to assertion of Trigger D.
      - Trigger delay - Trigger delay (for information only). This item is influenced by the following properties: Prescaler, Delay.
    - Trigger E - Trigger E Settings.
      - Trigger enable - Trigger E Enable/Disable.
      - Back to Back - Trigger A Back to Back operation.
      - Trigger delay value - This property is used to specify the delay from assertion of input trigger defined in Input trigger select property to assertion of Trigger E.
      - Trigger delay - Trigger Delay (for information only). This item is influenced by the following properties: Prescaler, Delay.
    - Trigger F - Trigger F Settings.
      - Trigger enable - Trigger F Enable/Disable.
      - Back to Back - Trigger F Back to Back operation.
      - Trigger delay value - This property is used to specify the delay from assertion of input trigger defined in Input trigger select property to assertion of Trigger F.
      - Trigger delay - Trigger delay (for information only). This item is influenced by the following properties: Prescaler, Delay.
    - Trigger G - Trigger G Settings.
      - Trigger enable - Trigger G Enable/Disable.
      - Back to Back - Trigger G Back to Back operation.
      - Trigger delay value - This property is used to specify the delay from assertion of input trigger defined in Input trigger select property to assertion of Trigger G.
      - Trigger delay - Trigger delay (for information only). This item is influenced by the following properties: Prescaler, Delay.
    - Trigger H - Trigger H Settings.
      - Trigger enable - Trigger H Enable/Disable.
      - Trigger delay value - This property is used to specify the delay from assertion of input trigger defined in Input trigger select property to assertion of Trigger H.
      - Trigger delay - Trigger delay (for information only). This item is influenced by the following properties: Prescaler, Delay.
- Setting supported for MCF51EM128_100 MCF51EM128_80 MCF51EM256_100 MCF51EM256_80 only
  - Channel 2 - Channel 2 settings.
    - Trigger A - Trigger A Settings.
      - Trigger enable - Trigger A Enable/Disable.
      - Output select - Channel 2 Trigger A Output Select.
        
        There are 4 options:
        
        bypassed: bypassed
        
        Delay A only: Delay A only
        
        Delay A and Delay B: Delay A and Delay B
        
        PulseOut: PulseOut
      - Trigger delay value - This property is used to specify the delay from assertion of input trigger defined in Input trigger select property to assertion of Trigger A.
      - Trigger delay - Trigger delay (for information only). This item is influenced by the following properties: Prescaler, Delay.
    - Trigger B - Trigger B Settings.
      - Trigger enable - Trigger A Enable/Disable.
      - Output select - Channel 2 Trigger B Output Select.
        
        There are 4 options:
        
        bypassed: bypassed
        
        Delay B only: Delay B only
        
        Delay A and Delay B: Delay A and Delay B
        
        PulseOut: PulseOut
      - Trigger delay value - This property is used to specify the delay from assertion of input trigger defined in Input trigger select property to assertion of Trigger B.
      - Trigger delay - Trigger delay (for information only). This item is influenced by the following properties: Prescaler, Delay.
  - Channel 3 - Channel 3 settings.
    - Trigger A - Trigger A Settings.
      - Trigger enable - Trigger A Enable/Disable.
      - Output select - Channel 3 Trigger A Output Select.
        
        There are 4 options:
        
        bypassed: bypassed
        
        Delay A only: Delay A only
        
        Delay A and Delay B: Delay A and Delay B
        
        PulseOut: PulseOut
      - Trigger delay value - This property is used to specify the delay from assertion of input trigger defined in Input trigger select property to assertion of Trigger A.
      - Trigger delay - Trigger delay (for information only). This item is influenced by the following properties: Prescaler, Delay.
    - Trigger B - Trigger B Settings.
      - Trigger enable - Trigger B Enable/Disable.
      - Output select - Channel 3 Trigger B Output Select.
        
        There are 4 options:
        
        bypassed: bypassed
        
        Delay B only: Delay B only
        
        Delay A and Delay B: Delay A and Delay B
        
        PulseOut: PulseOut
      - Trigger delay value - This property is used to specify the delay from assertion of input trigger defined in Input trigger select property to assertion of Trigger B.
      - Trigger delay - Trigger delay (for information only). This item is influenced by the following properties: Prescaler, Delay.
  - Channel 4 - Channel 4 settings.
    - Trigger A - Trigger A Settings.
      - Trigger enable - Trigger A Enable/Disable.
      - Output select - Channel 4 Trigger A Output Select.
        
        There are 4 options:
        
        bypassed: bypassed
        
        Delay A only: Delay A only
        
        Delay A and Delay B: Delay A and Delay B
        
        PulseOut: PulseOut
      - Trigger delay value - This property is used to specify the delay from assertion of input trigger defined in Input trigger select property to assertion of Trigger A.
      - Trigger delay - Trigger delay (for information only). This item is influenced by the following properties: Prescaler, Delay.
    - Trigger B - Trigger B Settings.
      - Trigger enable - Trigger B Enable/Disable.
      - Output select - Channel 4 Trigger B Output Select.
        
        There are 4 options:
        
        bypassed: bypassed
        
        Delay B only: Delay B only
        
        Delay A and Delay B: Delay A and Delay B
        
        PulseOut: PulseOut
      - Trigger delay value - This property is used to specify the delay from assertion of input trigger defined in Input trigger select property to assertion of Trigger B.
      - Trigger delay - Trigger delay (for information only). This item is influenced by the following properties: Prescaler, Delay.
- Counter - Counter Settings.
  - Prescaler - Determines the prescaler for the PDB module.
    
    There are 8 options:
    - divide by 1: divide by 1
    - divide by 2: divide by 2
    - divide by 4: divide by 4
    - divide by 8: divide by 8
    - divide by 16: divide by 16
    - divide by 32: divide by 32
    - divide by 64: divide by 64
    - divide by 128: divide by 128
  - Counter frequency - Counter input frequency (for information only). This item is influenced by the following properties: Prescaler.
  - Modulus - This property specifies the Counter period. When the counter reaches this value, it will be reset back to 'zero' on MCF51EM derivatives (to 'one' on other derivatives). If Continuous mode property is set to Continuous, the count begins a new round.
  - Counter period - Delay (for information only). This item is influenced by the following properties: Prescaler, Modulus.
  - Continuous mode enable - Selection between Continuous and One-shot mode.
- Setting supported for MCF51EM128_100 MCF51EM128_80 MCF51EM256_100 MCF51EM256_80 MCF51JE128_80 MCF51JE128_81 MCF51JE256_100 MCF51JE256_104 MCF51JE256_80 MCF51JE256_81 MCF51MM128_80 MCF51MM128_81 MCF51MM256_100 MCF51MM256_104 MCF51MM256_80 MCF51MM256_81 MC9S08JE128_64 MC9S08JE128_80 MC9S08JE128_81 MC9S08MM128_64 MC9S08MM128_80 MC9S08MM128_81 only
  - Interrupt delay value - This property can be used to set value used to schedule the PDB interrupt. This feature can be used to schedule an independent interrupt at some point within the Counter period.
  - Interrupt delay - Delay (for information only). This item is influenced by the following properties: Prescaler, Interrupt delay.
- Setting supported for MCF51JE128_80 MCF51JE128_81 MCF51JE256_100 MCF51JE256_104 MCF51JE256_80 MCF51JE256_81 MCF51MM128_80 MCF51MM128_81 MCF51MM256_100 MCF51MM256_104 MCF51MM256_80 MCF51MM256_81 MC9S08JE128_64 MC9S08JE128_80 MC9S08JE128_81 MC9S08MM128_64 MC9S08MM128_80 MC9S08MM128_81 only
  - Trigger to DAC - Trigger to DAC Settings.
    - DAC Trigger Output - DAC Trigger Output Enable
      
      There are 2 options:
      - Enabled: DAC interval register defines the number of PDB counts between DAC trigger outputs
      - Disabled: No DAC trigger output
    - Trigger interval value - This property is used to specify the time between DAC hardware trigger pulses.
    - Trigger interval time - Trigger interval time (for information only). This item is influenced by the following properties: Prescaler, Trigger interval value.
Pins/Signals - Module pins/signals settings.
- Input trigger select - Input trigger channel.
- Input trigger select signal - Signal name of Input trigger select
Setting supported for MCF51EM128_100 MCF51EM128_80 MCF51EM256_100 MCF51EM256_80 MCF51JE128_80 MCF51JE128_81 MCF51JE256_100 MCF51JE256_104 MCF51JE256_80 MCF51JE256_81 MCF51MM128_80 MCF51MM128_81 MCF51MM256_100 MCF51MM256_104 MCF51MM256_80 MCF51MM256_81 MC9S08JE128_64 MC9S08JE128_80 MC9S08JE128_81 MC9S08MM128_64 MC9S08MM128_80 MC9S08MM128_81 MC9S08MP12_28 MC9S08MP16_28 MC9S08MP16_32_LQFP MC9S08MP16_48 only
- Interrupts - Interrupts settings of the module
  - Interrupt - Interrupt vector (for information only).
  - Only if priority supported
    - Priority - Interrupt Priority
  - Setting supported for MCF51EM128_100 MCF51EM128_80 MCF51EM256_100 MCF51EM256_80 MCF51JE128_80 MCF51JE128_81 MCF51JE256_100 MCF51JE256_104 MCF51JE256_80 MCF51JE256_81 MCF51MM128_80 MCF51MM128_81 MCF51MM256_100 MCF51MM256_104 MCF51MM256_80 MCF51MM256_81 MC9S08JE128_64 MC9S08JE128_80 MC9S08JE128_81 MC9S08MM128_64 MC9S08MM128_80 MC9S08MM128_81 only
    - PDB interrupt - Enable/Disable the PDB interrupt. The 'PDB interrupt' is invoked when the PDB counter register reaches the value in the Interrupt delay property.
  - ISR name - Name of the interrupt service routine (ISR) invoked by this interrupt vector. The user code of the routine should handle all respective interrupt flags correctly. The routine must be implemented in the user code, it is not generated by Processor Expert. Find external prototypes of the ISRs in the component module header file.
  - Setting supported for MCF51EM128_100 MCF51EM128_80 MCF51EM256_100 MCF51EM256_80 only
    - Sequence error - Sequence error interrupt settings
      - Interrupt - Interrupt vector (for information only).
      - Only if priority supported
        
        Priority - Interrupt Priority
      - ISR name - Name of the interrupt service routine (ISR) invoked by this interrupt vector. The user code of the routine should handle all respective interrupt flags correctly. The routine must be implemented in the user code, it is not generated by Processor Expert. Find external prototypes of the ISRs in the component module header file.
Initialization - Initialization options of the module.
- Setting supported for MCF51AG128_64 MCF51AG128_80 MCF51JE128_80 MCF51JE128_81 MCF51JE256_100 MCF51JE256_104 MCF51JE256_80 MCF51JE256_81 MCF51MM128_80 MCF51MM128_81 MCF51MM256_100 MCF51MM256_104 MCF51MM256_80 MCF51MM256_81 MC9S08JE128_64 MC9S08JE128_80 MC9S08JE128_81 MC9S08MM128_64 MC9S08MM128_80 MC9S08MM128_81 MC9S08MP12_28 MC9S08MP16_28 MC9S08MP16_32_LQFP MC9S08MP16_48 only
  - Load OK - Enable/Disable Load OK.
- Enable PDB - Enable/Disable the Programmable Delay Block module.
- Call Init method - The Init method of the component may be called after a power-on or reset (in initialization code) by PE.
  yes - The Init method is called by PE.
  no - The Init method is not called by PE, it should be called in the user's code.

PROCESSOR EXPERT is trademark of Freescale Semiconductor, Inc.
Copyright 1997 - 2010 Freescale Semiconductor, Inc.