| Init_OpAmp | |
|
|
Component
Init_OpAmp for HC08
Op Amp / Comparator module (OpAmp)
Component Level: Peripheral Initialization
Properties:
(Properties are parameters of the component. Please see the Embedded Components page for more information.)
- Component name - Name of the component.
- Device - Op Amp/Comparator module.
-
Settings - Common Op Amp module settings.
-
Op Amp mode - This item selects between two modes of operation, op amp mode and comparator mode.
This item modifies the OACM bit in the OACCR register.
There are 2 options:
- Comparator: Comparator mode selected
- Op Amp: Op amp mode selected
-
Op Amp mode - This item selects between two modes of operation, op amp mode and comparator mode.
-
Pins - Module pins settings.
- Input V+ pin - V+ Op amp/comparator input pin (for information only)
- Input V+ pin signal - Signal name for the V+ Op amp/comparator input pin
- Input V- pin - V- Op amp/comparator input pin (for information only)
- Input V- pin signal - Signal name for the V- Op amp/comparator input pin
- Output Vout pin - VOUT Op amp/comparator output pin (for information only)
- Output Vout pin signal - Signal name for the VOUT Op amp/comparator output pin
-
Initialization - Initialization option of the module.
-
Call Init method - The Init method of the component may be called after power-on or reset (in initialization code) by PE.
yes - The Init method is called by PE
no - The Init method is not called by PE, it should be called in user's code -
Enable Op Amp module - The property enables Op Amp module .
This item modifies the OACE bit in the OACCR register.
-
Call Init method - The Init method of the component may be called after power-on or reset (in initialization code) by PE.