| Init_OPAMP | |
|
|
Component
Init_OPAMP for HCS08
General Purpose Operational Amplifier
Device Initialization
(Description of the component parameters.)
- Device - OPAMP Device module
-
Settings - Common OPAMP module settings
-
Power mode - This item selects the power-level mode.
There are 2 options:
- High-speed: High-speed mode
- Low-power: Low-power mode
-
OPAMP mode - The property selects the OPAMP mode.
There are 4 modes:- Buffer - There are no items in this mode.
- General purpose - There are no items in this mode.
- Inverting PGA - The following items are displayed in this mode:
- Gain - This property selects the OPAMP gain in the inverting PGA mode.
- Non-inverting PGA - The following items are displayed in this mode:
- Gain - This property selects the OPAMP gain in the non-inverting PGA mode.
-
Power mode - This item selects the power-level mode.
-
Pins - Module pins settings.
-
Positive Input - Setting of the positive input pin.
- Pin - Positive input of the OPAMP module
-
Negative Input - Setting of the negative input pin.
- Pin - Negative input of the OPAMP module
-
Output - Setting of the output pin.
- Pin - Output of the OPAMP module
-
Positive Input - Setting of the positive input pin.
-
Initialization - Initialization options of the module
-
Module enable - Enables the OPAMP module.
There are 2 options:
- yes: The OPAMP is enabled and is powered.
- no: The OPAMP is disabled and not powered.
-
Module enable - Enables the OPAMP module.