Component documentation

Component name - Name of the component.
UHF channel - UHF transmitter device.
Modulation timer - Timer used to data supply from CPU to transmitter.
Bit width (clocks) - Number of DataCLK clocks used to transmit one bit of data.
PLL lock-in time (clocks) - Number of DataCLK clocks used for waiting to PLL is stable...
Send MSB first - Order in which bits are transmitted (MSB: most significant bit, LSB: less significant bit).
Xtal clock frequency [MHz] - Crystal oscillator frequency. Standard recommended values are 9.84 and 13.56 MHz.
Frequency Band [MHz] - This is the RFout frequency. It depends on Xtal clock frequency and value on BAND pin. 'xxx or yyy' value means, that component cannot determine initial BAND pin value and for BAND=0 RFout will be xxx MHz and for BAND=1 RFout will be yyy MHz. For information only.
HW Interface - Display connection to the Target CPU.
- Enable - ENABLE signal connection.
  - Pin - UHF transmitter ENABLE signal is connected to this pin.
  - Pin Signal - Signal name of UHF transmitter ENABLE pin.
  - Enable controlled from pin - Pin controlling UHF transmitter ENABLE (for details about settings see Component Inheritance & Component Sharing).
- Data - DATA signal connection.
  - Pin - UHF transmitter DATA signal is connected to this pin.
  - Pin Signal - Signal name of UHF transmitter DATA pin.
  - Data controlled from pin - Pin controlling UHF transmitter DATA.
  - Pin Signal - Signal name of pin controlling UHF transmitter DATA.
- DataCLK - DATACLK signal connection.
  - Pin - UHF transmitter DATACLK signal is connected to this pin.
  - Pin Signal - Signal name of UHF transmitter DATACLK pin.
  - DataCLK controlled from pin - Pin controlling UHF transmitter DATACLK.
  - Pin Signal - Signal name of pin controlling UHF transmitter DATACLK.
- Mode control - Enables/disables SW control of Mode signal. When disabled, it is assumed that Mode signal is hardwired.
  The following items are available only if the group is enabled (the value is "Enabled"):
  - Pin - UHF transmitter MODE signal is connected to this pin.
  - Pin Signal - Signal name of UHF transmitter MODE pin.
  - Mode controlled from pin - Pin controlling UHF transmitter MODE (for details about settings see Component Inheritance & Component Sharing).
- Band control - Enables/disables SW control of Band signal. When disabled, it is assumed that Band signal is hardwired.
  The following items are available only if the group is enabled (the value is "Enabled"):
  - Pin - UHF transmitter BAND signal is connected to this pin.
  - Pin Signal - Signal name of UHF transmitter BAND pin.
  - Band controlled from pin - Pin controlling UHF transmitter BAND (for details about settings see Component Inheritance & Component Sharing).

PROCESSOR EXPERT is trademark of Freescale Semiconductor, Inc.
Copyright 1997 - 2010 Freescale Semiconductor, Inc.