// SPDX-FileCopyrightText: Copyright (c) Ken Martin, Will Schroeder, Bill Lorensen
// SPDX-License-Identifier: BSD-3-Clause
/**
 * @class   vtkLoopBooleanPolyDataFilter
 *
 *
 * Computes the boundary of the union, intersection, or difference
 * volume computed from the volumes defined by two input surfaces. The
 * two surfaces do not need to be manifold, but if they are not,
 * unexpected results may be obtained. The resulting surface is
 * available in the first output of the filter. The second output
 * contains a set of polylines that represent the intersection between
 * the two input surfaces.
 * The filter uses vtkIntersectionPolyDataFilter. Must have information
 * about the cells on mesh that the intersection lines touch. Filter assumes
 * this information is given.
 * The output result will have data about the Original Surface,
 * BoundaryPoints, Boundary Cells,
 * Free Edges, and Bad Triangles
 */
#ifndef vtkLoopBooleanPolyDataFilter_h
#define vtkLoopBooleanPolyDataFilter_h

#include "vtkDataSetAttributes.h"    // Needed for CopyCells() method
#include "vtkFiltersGeneralModule.h" // For export macro
#include "vtkPolyDataAlgorithm.h"

VTK_ABI_NAMESPACE_BEGIN
class vtkIdList;

/*!
 *  \brief Filter to perform boolean operations
 *  \author Adam Updegrove
 */
class VTKFILTERSGENERAL_EXPORT vtkLoopBooleanPolyDataFilter : public vtkPolyDataAlgorithm
{
public:
  /**
   * Construct object that computes the boolean surface.
   */
  static vtkLoopBooleanPolyDataFilter* New();

  vtkTypeMacro(vtkLoopBooleanPolyDataFilter, vtkPolyDataAlgorithm);

  void PrintSelf(ostream& os, vtkIndent indent) override;

  ///@{
  /**
   * Integer describing the number of intersection points and lines
   */
  vtkGetMacro(NumberOfIntersectionPoints, int);
  vtkGetMacro(NumberOfIntersectionLines, int);
  ///@}

  ///@{
  /**
   * ONLY USED IF NO INTERSECTION BETWEEN SURFACES
   * Variable to determine what is output if no intersection occurs.
   * 0 = neither (default), 1 = first, 2 = second, 3 = both
   */
  vtkGetMacro(NoIntersectionOutput, int);
  vtkSetMacro(NoIntersectionOutput, int);
  vtkBooleanMacro(NoIntersectionOutput, int);
  ///@}

  // Union intersection, or difference
  enum OperationType
  {
    VTK_UNION = 0,
    VTK_INTERSECTION,
    VTK_DIFFERENCE
  };
  // Output if no intersection
  enum NoIntersectionOutputType
  {
    VTK_NEITHER = 0,
    VTK_FIRST,
    VTK_SECOND,
    VTK_BOTH,
  };

  ///@{
  /**
   * Set the boolean operation to perform. Defaults to union.
   */
  vtkSetClampMacro(Operation, int, VTK_UNION, VTK_DIFFERENCE);
  vtkGetMacro(Operation, int);
  void SetOperationToUnion() { this->SetOperation(VTK_UNION); }
  void SetOperationToIntersection() { this->SetOperation(VTK_INTERSECTION); }
  void SetOperationToDifference() { this->SetOperation(VTK_DIFFERENCE); }
  ///@}

  ///@{
  /**
   * Check the status of the filter after update. If the status is zero,
   * there was an error in the operation. If status is one, everything
   * went smoothly
   */
  vtkGetMacro(Status, int);
  ///@}

  ///@{
  /**
   * Set the tolerance for geometric tests
   */
  vtkGetMacro(Tolerance, double);
  vtkSetMacro(Tolerance, double);
  ///@}

protected:
  vtkLoopBooleanPolyDataFilter();
  ~vtkLoopBooleanPolyDataFilter() override;

  int RequestData(vtkInformation*, vtkInformationVector**, vtkInformationVector*) override;
  int FillInputPortInformation(int, vtkInformation*) override;

private:
  vtkLoopBooleanPolyDataFilter(const vtkLoopBooleanPolyDataFilter&) = delete;
  void operator=(const vtkLoopBooleanPolyDataFilter&) = delete;

  ///@{
  /**
   * Which operation to perform.
   * Can be VTK_UNION, VTK_INTERSECTION, or VTK_DIFFERENCE.
   */
  int Operation;
  int NoIntersectionOutput;
  int NumberOfIntersectionPoints;
  int NumberOfIntersectionLines;
  ///@}

  int Status;
  double Tolerance;

  class Impl;
};

VTK_ABI_NAMESPACE_END
#endif