//                    串口测试程序

#include <reg52.h>
#include <intrins.h>

#define	LcmXPixel 128	//横向宽度
#define	LcmYPixel 32	//纵向高度
#define MIN(A,B) ((A)<(B)?(A):(B))
#define Uchar unsigned char
#define Uint  unsigned int

sbit SID = P1^4;	//数据
sbit SCK = P1^3;	//Clock信号
sbit RS  = P1^2;	//数据指令选择
sbit RES = P1^1;	//测试架复位是板载RC复位,可以不需要IO口操作
sbit CS  = P1^0;	//片选

sbit Key = P3^4;	//测试架锁定按键

Uchar code ASCIIchardot[];
Uchar code bmp0[]; //中性

//Uchar code ComTable[]={3,2,1,0,};
Uchar code ComTable[]={3,2,1,0,};


//串口模式下只能写不能读,也不能查忙,因此用户要控制好速度不要太快
void WriteCommand( Uchar CommandByte )
{
	Uchar i;
	CS=0;
	RS=0;		//Command
	for(i=0;i<8;i++)
	{	SCK=1;
		SID=( (CommandByte>>(7-i)) &0x01);
		SCK=0;
		_nop_();
		_nop_();
		SCK=1;
	}
}

void WriteData( Uchar DataByte )
{
	Uchar i;
	CS=0;
	RS=1;		//Data
	for(i=0;i<8;i++)
	{
		SCK=1;
		SID=( (DataByte>>(7-i)) &0x01);
		SCK=0;
		_nop_();
		_nop_();
		SCK=1;
	}
}

void DelayMS(unsigned int MS)
{
	unsigned char us,usn;
	while(MS!=0)
	{
		usn = 2;	//for 12M
		while(usn!=0)
		{
//			us=246;
			us=25;
			while (us!=0){us--;};
			usn--;
		}
		MS--;
	}
}

void DelayKey(unsigned int Second , unsigned int MS100)
{
	unsigned int i;
	for(i=0;i<Second*100+MS100*10;i++)
	{
		if(Key==0)
		{
			DelayMS(20);
			while(Key==0) {DelayMS(20);}
			break;
		}
		else DelayMS(10);
	}
}

void LcmClear( Uchar FillData )
{
	Uint i,j;
	for(i=0;i<8;i++)
	{
		WriteCommand(0xB0|ComTable[i]);	//Set Page Address
		WriteCommand(0x10);	//Set Column Address = 0
		WriteCommand(0x00);	//Colum from S0 -> S127 auto add
		for(j=0;j<128;j++)
		{
			WriteData( FillData );
		}
	}
}

void LcmInit( void )
{
	WriteCommand(0xAE);	//Display OFF
	WriteCommand(0xA2);	//1/33 Duty 1/6 Bias
	WriteCommand(0xA0);	//ADC select S0->S131(玻璃设计用S1-S128)
	WriteCommand(0xC0);	//com1 --> com64
	WriteCommand(0x21);	//Rb/Ra
	WriteCommand(0x81);	//Sets V0
	WriteCommand(27);
	WriteCommand(0x2F);	//voltage follower ON  regulator ON  booster ON
	WriteCommand(0xA6);	//Normal Display (not reverse dispplay)
	WriteCommand(0xA4);	//Entire Display Disable	
	WriteCommand(0x40);	//Set Display Start Line = com0
	WriteCommand(0xB0);	//Set Page Address = 0
	WriteCommand(0x10);	//Set Column Address 4 higher bits = 0
	WriteCommand(0x00);	//Set Column Address 4 lower bits = 0 , from IC SEG0 -> SEG127
	LcmClear(0);
	WriteCommand(0xAF);	//Display ON
}

//显示ASICC字符的函数
void LcmPutChar(Uchar col,Uchar page,Uchar Order)
{
	Uchar i;
	Uint x;
	x = (Order-0x20)*0x10;			//ASICC字符从0x20开始,每个16 byte
	WriteCommand(ComTable[page&0x07]|0xB0);	//Set Page Address
	WriteCommand( ((col+0)>>4) | 0x10);	//Set Column Address High Byte
	WriteCommand( (col+0)&0x0F );		//Low Byte  Colum from S128 -> S1 auto add


	for(i=0;i<8;i++)
	{
		WriteData( ASCIIchardot[x] );
		x++;
	}
	page++;					//下半字符page+1
	
	WriteCommand(ComTable[page&0x07]|0xB0);	//Set Page Address
	WriteCommand( ((col+0)>>4) | 0x10);		//Set Column Address High Byte
	WriteCommand( (col+0)&0x0F );			//Low Byte  Colum from S128 -> S1 auto add
	
	for(i=0;i<8;i++)
	{
		WriteData( ASCIIchardot[x] );
		x++;
	}
	page--;					//写完一个字符page还原
}

//显示字符串的函数
void LcmPutStr(Uchar col,Uchar page,Uchar *puts)
{
	while(*puts != '\0')		//判断字符串时候显示完毕
	{
		
		if(col>(LcmXPixel-8))		//判断行末空间是否足够放一个字符,自动换行
		{
			page=page+2;
			col=0;
		}
		if(page>(LcmYPixel/8-2))	//到了屏幕最下角,自动返回左上角
		{
			page=0;
			col=0;
		}	
		LcmPutChar(col,page,*puts);
		puts++;
		col=col+8;		//下一个字符8列之后
	}
}

//显示3位数的数值(0-255)
void LcmPutNum(Uchar col,Uchar page,Uchar Num)
{
	Uchar a,b,c;
	a=Num/100;
	b=(Num%100)/10;
	c=Num%10;
	if(a==0) ;	//也不写空格,直接跳过去//PutChar(col,page,0x20);
	  else LcmPutChar(col,page,a+0x30);
	
	if(a==0 && b==0) ;	//也不写空格,直接跳过去//LcmPutChar(col,page,0x20);
	  else LcmPutChar(col+8,page,b+0x30);
	  
	LcmPutChar(col+16,page,c+0x30);
}

void LcmPutBmp( Uchar *puts )
{
	Uchar i,j;
	Uint X=0;
	for(i=0;i<(LcmYPixel/8);i++)
	{
		WriteCommand(0xB0|ComTable[i]);	//Set Page Address
		WriteCommand(0x10);	//Set Column Address = 0
		WriteCommand(0x00);	//Colum from S0 -> S127 auto add
		for(j=0;j<LcmXPixel;j++)
		{
			WriteData( puts[X] );
			X++;
		}
	}
}

void LcmPutDots( Uchar DotByte,Uchar n )
{
	Uchar i,j,k;
	for(i=0;i<(LcmYPixel/8);i++)
	{
		WriteCommand(0xB0|ComTable[i]);	//Set Page Address
		WriteCommand(0x10);	//Set Column Address = 0
		WriteCommand(0x00);	//Colum from S0 -> S127 auto add
		for(j=0;j<(LcmXPixel/n);j++)
		{
			for(k=0;k<n;k++)
			{
				WriteData( DotByte );
			}
			DotByte = ~DotByte;
		}
		if(n>=8) DotByte = ~DotByte;
	}
}

void ini_int1(void) 
{ 
EA=1; 
EX0=1;//允许外部INT0的中断 
IT0=1;// 允许中断
}


 int scankey1() interrupt 0 using 1 //使用外部中断1,寄存器组3
{ 
while(P3^2==0){for(;;);}
   IE1=0;//中断标志清零 
   
}

void main( void )
{
		/*DelayMS(10);
	    RES = 0;
	    DelayMS(50);
	    RES = 1;
    	DelayMS(50);
        LcmInit(); */
		ini_int1();//开中断
	while(1)
	{	
	    
		DelayMS(10);
	    RES = 0;
	    DelayMS(50);
	    RES = 1;
    	DelayMS(50);
        LcmInit();

		LcmPutBmp(bmp0);
		DelayKey(30,10);

		LcmClear(0);
		LcmPutStr(0,0,"COG12832 Program");
		LcmPutStr(0,2,"HIJING ELEC-TECH");
		DelayKey(30,10);

		LcmClear(0xff);
		DelayKey(30,10);
		
		DelayMS(10);
	    RES = 0;
	    DelayMS(50);
	    RES = 1;
    	DelayMS(50);
        LcmInit();

		LcmPutDots(0x55,1);
		DelayKey(30,10);
		LcmPutDots(0xAA,1);
		DelayKey(30,10);
		LcmPutDots(0xCC,2);
		DelayKey(30,10);
		LcmPutDots(0x33,2);
		DelayKey(30,10);
		LcmPutDots(0xF0,4);
		DelayKey(30,10);
		LcmPutDots(0x0F,4);
		DelayKey(30,10);
	}
}


/* ASICC字库代码 8x16点阵 */
unsigned char code ASCIIchardot[16*96] = {
/*--  文字:     --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  !  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x0E,0x1F,0x1F,0x0E,0x00,0x00,0x00,0x00,0x00,0xB0,0xB0,0x00,0x00,0x00,

/*--  文字:  "  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1C,0x1C,0x00,0x00,0x1C,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  #  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x04,0x1F,0x1F,0x04,0x1F,0x1F,0x04,0x00,0x40,0xF0,0xF0,0x40,0xF0,0xF0,0x40,

/*--  文字:  $  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x0C,0x1E,0x73,0x71,0x18,0x08,0x00,0x00,0x20,0x30,0x1C,0x9C,0xF0,0x60,0x00,

/*--  文字:  %  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x18,0x3C,0x24,0x3D,0x1B,0x06,0x0C,0x00,0x00,0x60,0xC0,0xB0,0x78,0x48,0x78,0x30,

/*--  文字:  &  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x0D,0x1F,0x12,0x1E,0x0C,0x00,0x00,0x00,0xE0,0xF0,0x10,0x90,0xE0,0xF0,0x90,

/*--  文字:  '  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x1C,0x1C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  (  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x03,0x0F,0x1C,0x10,0x00,0x00,0x00,0x00,0xE0,0xF8,0x1C,0x04,0x00,0x00,

/*--  文字:  )  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x10,0x1C,0x0F,0x03,0x00,0x00,0x00,0x00,0x04,0x1C,0xF8,0xE0,0x00,0x00,

/*--  文字:  *  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x01,0x05,0x07,0x03,0x07,0x05,0x01,0x00,0x00,0x40,0xC0,0x80,0xC0,0x40,0x00,

/*--  文字:  +  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x01,0x01,0x07,0x07,0x01,0x01,0x00,0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,

/*--  文字:  ,  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x34,0x3C,0x38,0x00,0x00,

/*--  文字:  -  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  .  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x30,0x00,0x00,

/*--  文字:  /  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x01,0x07,0x1E,0x18,0x00,0x00,0x18,0x78,0xE0,0x80,0x00,0x00,0x00,

/*--  文字:  0  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x0F,0x1F,0x10,0x16,0x1F,0x0F,0x00,0x00,0xE0,0xF0,0xD0,0x10,0xF0,0xE0,

/*--  文字:  1  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x04,0x04,0x0C,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,

/*--  文字:  2  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x0C,0x1C,0x10,0x11,0x1F,0x0E,0x00,0x00,0x30,0x70,0xD0,0x90,0x10,0x10,0x00,

/*--  文字:  3  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x0C,0x1C,0x11,0x11,0x1F,0x0E,0x00,0x00,0x60,0x70,0x10,0x10,0xF0,0xE0,0x00,

/*--  文字:  4  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x1F,0x1F,0x00,0x07,0x07,0x00,0x00,0xC0,0xC0,0x40,0x40,0xF0,0xF0,0x40,

/*--  文字:  5  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x11,0x11,0x11,0x10,0x00,0x00,0x10,0x10,0x10,0x30,0xE0,0xC0,0x00,

/*--  文字:  6  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x03,0x07,0x1E,0x1A,0x13,0x01,0x00,0x00,0xE0,0xF0,0x10,0x10,0xF0,0xE0,0x00,

/*--  文字:  7  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x10,0x10,0x11,0x17,0x1E,0x18,0x00,0x00,0x00,0x70,0xF0,0x80,0x00,0x00,0x00,

/*--  文字:  8  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x0E,0x1F,0x13,0x11,0x1F,0x0E,0x00,0x00,0xE0,0xF0,0x10,0x90,0xF0,0xE0,0x00,

/*--  文字:  9  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x0F,0x1F,0x10,0x10,0x1F,0x0F,0x00,0x00,0x00,0x90,0xB0,0xF0,0xC0,0x80,0x00,

/*--  文字:  :  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x06,0x06,0x06,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x30,0x00,0x00,

/*--  文字:  ;  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x06,0x06,0x06,0x00,0x00,0x00,0x00,0x00,0x34,0x3C,0x38,0x00,0x00,

/*--  文字:  <  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x01,0x03,0x06,0x0C,0x18,0x10,0x00,0x00,0x00,0x80,0xC0,0x60,0x30,0x10,0x00,

/*--  文字:  =  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x02,0x02,0x02,0x02,0x02,0x02,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,

/*--  文字:  >  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x10,0x18,0x0C,0x06,0x03,0x01,0x00,0x00,0x10,0x30,0x60,0xC0,0x80,0x00,0x00,

/*--  文字:  ?  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x0C,0x1C,0x11,0x13,0x1E,0x0C,0x00,0x00,0x00,0x00,0xB0,0xB0,0x00,0x00,0x00,

/*--  文字:  @  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x0F,0x1F,0x10,0x11,0x13,0x12,0x1F,0x0F,0xE0,0xF0,0x10,0x90,0xD0,0x50,0xD0,0xD0,

/*--  文字:  A  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x07,0x0F,0x18,0x18,0x0F,0x07,0x00,0x00,0xF0,0xF0,0x80,0x80,0xF0,0xF0,0x00,

/*--  文字:  B  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x11,0x11,0x1F,0x0E,0x00,0x00,0xF0,0xF0,0x10,0x10,0xF0,0xE0,0x00,

/*--  文字:  C  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x0F,0x1F,0x10,0x10,0x1C,0x0C,0x00,0x00,0xE0,0xF0,0x10,0x10,0x70,0x60,0x00,

/*--  文字:  D  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x10,0x18,0x0F,0x07,0x00,0x00,0xF0,0xF0,0x10,0x30,0xE0,0xC0,0x00,

/*--  文字:  E  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x11,0x11,0x11,0x10,0x00,0x00,0xF0,0xF0,0x10,0x10,0x10,0x10,0x00,

/*--  文字:  F  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x11,0x11,0x11,0x10,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  G  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x0F,0x1F,0x10,0x10,0x1C,0x0C,0x00,0x00,0xE0,0xF0,0x10,0x90,0xF0,0xF0,0x00,

/*--  文字:  H  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x01,0x01,0x1F,0x1F,0x00,0x00,0xF0,0xF0,0x00,0x00,0xF0,0xF0,0x00,

/*--  文字:  I  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x10,0x1F,0x1F,0x10,0x00,0x00,0x00,0x00,0x10,0xF0,0xF0,0x10,0x00,0x00,

/*--  文字:  J  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x00,0x00,0x1F,0x1F,0x00,0x00,0x60,0x70,0x10,0x10,0xF0,0xE0,0x00,

/*--  文字:  K  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x01,0x07,0x1E,0x18,0x00,0x00,0xF0,0xF0,0x00,0xC0,0xF0,0x30,0x00,

/*--  文字:  L  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x10,0x10,0x10,0x10,0x00,

/*--  文字:  M  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x04,0x03,0x04,0x1F,0x1F,0x00,0xF0,0xF0,0x00,0x80,0x00,0xF0,0xF0,

/*--  文字:  N  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x06,0x03,0x01,0x1F,0x1F,0x00,0xF0,0xF0,0x00,0x00,0x80,0xF0,0xF0,

/*--  文字:  O  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x0F,0x1F,0x10,0x10,0x1F,0x0F,0x00,0x00,0xE0,0xF0,0x10,0x10,0xF0,0xE0,0x00,

/*--  文字:  P  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x11,0x11,0x1F,0x0E,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  Q  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x0F,0x1F,0x10,0x10,0x1F,0x0F,0x00,0x00,0xE0,0xF0,0x10,0x18,0xFC,0xE4,0x00,

/*--  文字:  R  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x11,0x11,0x1F,0x0E,0x00,0x00,0xF0,0xF0,0x00,0x80,0xF0,0x70,0x00,

/*--  文字:  S  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x0C,0x1E,0x13,0x11,0x18,0x08,0x00,0x00,0x20,0x30,0x10,0x90,0xF0,0x60,0x00,

/*--  文字:  T  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x10,0x10,0x1F,0x1F,0x10,0x10,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,

/*--  文字:  U  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x00,0x00,0x1F,0x1F,0x00,0x00,0xE0,0xF0,0x10,0x10,0xF0,0xE0,0x00,

/*--  文字:  V  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x00,0x00,0x1F,0x1F,0x00,0x00,0xC0,0xE0,0x30,0x30,0xE0,0xC0,0x00,

/*--  文字:  W  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x00,0x03,0x00,0x1F,0x1F,0x00,0x80,0xF0,0x70,0x80,0x70,0xF0,0x80,

/*--  文字:  X  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x18,0x1C,0x07,0x03,0x1C,0x18,0x00,0x00,0x70,0xF0,0x00,0x80,0xF0,0x70,0x00,

/*--  文字:  Y  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1E,0x1F,0x01,0x01,0x1F,0x1E,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,

/*--  文字:  Z  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x10,0x10,0x11,0x13,0x1E,0x1C,0x00,0x00,0x70,0xF0,0x90,0x10,0x10,0x10,0x00,

/*--  文字:  [  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x1F,0x1F,0x10,0x10,0x00,0x00,0x00,0x00,0xFE,0xFE,0x02,0x02,0x00,0x00,

/*--  文字:  \  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x18,0x1E,0x07,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xE0,0x78,0x18,0x00,

/*--  文字:  ]  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x10,0x10,0x1F,0x1F,0x00,0x00,0x00,0x00,0x02,0x02,0xFE,0xFE,0x00,0x00,

/*--  文字:  ^  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x10,0x30,0x60,0x60,0x30,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  _  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,

/*--  文字:  `  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x40,0x60,0x70,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  a  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x04,0x04,0x04,0x07,0x03,0x00,0x00,0x60,0xF0,0x90,0x90,0xF0,0xF0,0x00,

/*--  文字:  b  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x04,0x04,0x07,0x03,0x00,0x00,0xF0,0xF0,0x10,0x10,0xF0,0xE0,0x00,

/*--  文字:  c  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x03,0x07,0x04,0x04,0x06,0x02,0x00,0x00,0xE0,0xF0,0x10,0x10,0x30,0x20,0x00,

/*--  文字:  d  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x03,0x07,0x04,0x04,0x1F,0x1F,0x00,0x00,0xE0,0xF0,0x10,0x10,0xF0,0xF0,0x00,

/*--  文字:  e  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x03,0x07,0x04,0x04,0x07,0x03,0x00,0x00,0xE0,0xF0,0x90,0x90,0x90,0x80,0x00,

/*--  文字:  f  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x01,0x0F,0x1F,0x11,0x11,0x11,0x00,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,

/*--  文字:  g  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x03,0x07,0x04,0x04,0x07,0x07,0x00,0x00,0xE2,0xF2,0x12,0x12,0xFE,0xFC,0x00,

/*--  文字:  h  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x04,0x04,0x07,0x03,0x00,0x00,0xF0,0xF0,0x00,0x00,0xF0,0xF0,0x00,

/*--  文字:  i  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x04,0x04,0x37,0x37,0x00,0x00,0x00,0x00,0x10,0x10,0xF0,0xF0,0x10,0x10,0x00,

/*--  文字:  j  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x04,0x04,0x37,0x37,0x00,0x00,0x00,0x02,0x02,0x02,0xFE,0xFC,0x00,0x00,

/*--  文字:  k  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x00,0x01,0x07,0x06,0x00,0x00,0xF0,0xF0,0x80,0xC0,0x70,0x30,0x00,

/*--  文字:  l  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x10,0x10,0x1F,0x1F,0x00,0x00,0x00,0x00,0x10,0x10,0xF0,0xF0,0x10,0x10,0x00,

/*--  文字:  m  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x07,0x07,0x04,0x07,0x04,0x07,0x03,0x00,0xF0,0xF0,0x00,0xE0,0x00,0xF0,0xF0,

/*--  文字:  n  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x07,0x07,0x04,0x04,0x07,0x03,0x00,0x00,0xF0,0xF0,0x00,0x00,0xF0,0xF0,0x00,

/*--  文字:  o  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x03,0x07,0x04,0x04,0x07,0x03,0x00,0x00,0xE0,0xF0,0x10,0x10,0xF0,0xE0,0x00,

/*--  文字:  p  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x07,0x07,0x04,0x04,0x07,0x03,0x00,0x00,0xFE,0xFE,0x10,0x10,0xF0,0xE0,0x00,

/*--  文字:  q  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x03,0x07,0x04,0x04,0x07,0x07,0x00,0x00,0xE0,0xF0,0x10,0x10,0xFE,0xFE,0x00,

/*--  文字:  r  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x07,0x07,0x01,0x02,0x06,0x06,0x00,0x00,0xF0,0xF0,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  s  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x03,0x07,0x04,0x04,0x04,0x04,0x00,0x00,0x10,0x90,0x90,0x90,0xF0,0x60,0x00,

/*--  文字:  t  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x04,0x1F,0x1F,0x04,0x04,0x04,0x00,0x00,0x00,0xE0,0xF0,0x10,0x10,0x10,0x00,

/*--  文字:  u  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x07,0x07,0x00,0x00,0x07,0x07,0x00,0x00,0xE0,0xF0,0x10,0x10,0xF0,0xF0,0x00,

/*--  文字:  v  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x07,0x07,0x00,0x00,0x07,0x07,0x00,0x00,0xC0,0xE0,0x30,0x30,0xE0,0xC0,0x00,

/*--  文字:  w  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x07,0x07,0x00,0x03,0x00,0x07,0x07,0x00,0xC0,0xF0,0x30,0xC0,0x30,0xF0,0xC0,

/*--  文字:  x  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x06,0x07,0x01,0x01,0x07,0x06,0x00,0x00,0x30,0x70,0xC0,0xC0,0x70,0x30,0x00,

/*--  文字:  y  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x07,0x07,0x00,0x00,0x07,0x07,0x00,0x02,0xE2,0xF2,0x16,0x1C,0xF8,0xE0,0x00,

/*--  文字:  z  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x04,0x04,0x04,0x05,0x07,0x06,0x00,0x00,0x30,0x70,0xD0,0x90,0x10,0x10,0x00,

/*--  文字:  {  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x01,0x0F,0x1E,0x10,0x00,0x00,0x00,0x80,0xC0,0x78,0x3C,0x04,0x00,0x00,

/*--  文字:  |  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x00,0x1F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0x00,0x00,0x00,

/*--  文字:  }  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x00,0x10,0x1E,0x0F,0x01,0x00,0x00,0x00,0x00,0x04,0x3C,0x78,0xC0,0x80,0x00,

/*--  文字:  ~  --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x0C,0x18,0x10,0x18,0x0C,0x04,0x0C,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:    --*/
/*--  Fixedsys12;  此字体下对应的点阵为：宽x高=8x16   --*/
0x00,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,0x00,0x00,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0x00,
};

Uchar code bmp0[]={
/*--  调入了一幅图像：C:\Users\刘工\Pictures\12832.bmp  --*/
/*--  宽度x高度=128x32  --*/
0xFF,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0xFF,
0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x08,0x08,0x1F,0x00,0x00,0x00,0x00,0x0E,0x10,0x10,0x10,0x10,0x0F,
0x00,0x00,0x0E,0x11,0x10,0x10,0x11,0x0E,0x00,0x00,0x0C,0x10,0x10,0x10,0x11,0x0E,
0x00,0x00,0x0E,0x10,0x10,0x10,0x10,0x0F,0x00,0x00,0x7F,0x40,0x42,0x44,0x4C,0x7A,
0x49,0x4A,0x4C,0x48,0x40,0x40,0x7F,0x00,0x00,0x01,0x41,0x41,0x7F,0x41,0x41,0x7F,
0x41,0x41,0x01,0x04,0x08,0x10,0x61,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,
0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x04,0x04,0xFC,0x04,0x04,0x00,0x00,0x0C,0x14,0x24,0x44,0x84,0x0C,
0x00,0x00,0x38,0x44,0x84,0x84,0x44,0x38,0x00,0x00,0x18,0x04,0x84,0x84,0x44,0x38,
0x00,0x00,0x0C,0x14,0x24,0x44,0x84,0x0C,0x00,0x00,0xFF,0x42,0x42,0x42,0x8A,0xAA,
0x26,0x96,0x82,0x42,0x42,0x42,0xFF,0x00,0x00,0x01,0x02,0x0C,0xF0,0x00,0x00,0xFF,
0x00,0x00,0x01,0x21,0x42,0x84,0x08,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,
0xFF,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0xFF,

};
Uchar code bmp1[]={
/*--  调入了一幅图像：d:\My Documents\My Pictures\12832.bmp  --*/
/*--  宽度x高度=128x32  --*/
0xFF,0xC0,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x81,0x99,0x8C,0x80,0x8C,0x89,
0x8E,0x88,0x88,0x8E,0x8B,0x89,0x8C,0x80,0x80,0x81,0x81,0x9F,0x81,0x81,0x98,0x9F,
0x80,0x8F,0x80,0x80,0x9F,0x80,0x80,0x80,0x88,0x88,0x89,0x88,0x9D,0x88,0x88,0x89,
0x9D,0x88,0x88,0x88,0x88,0x80,0x80,0x80,0x80,0x80,0x8F,0x89,0x89,0x89,0x89,0x89,
0x89,0x8F,0x80,0x80,0x80,0x80,0x80,0x88,0x8B,0x8B,0x8A,0x8A,0x9A,0x8A,0x8A,0x8B,
0x8B,0x88,0x80,0x80,0x80,0x84,0x88,0x8F,0x8F,0x98,0x80,0x80,0x8C,0x82,0x80,0x9F,
0x80,0x80,0x80,0x80,0x82,0x82,0x9F,0x82,0x83,0x84,0x84,0x84,0x9F,0x84,0x84,0x84,
0x84,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0xC0,0xFF,
0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x87,0x18,0x02,0xA2,0x2C,
0x38,0xFF,0xFF,0x38,0x2C,0x26,0x22,0x00,0x00,0x0C,0x08,0xF8,0x09,0x03,0x7E,0xE0,
0x00,0xFE,0x00,0x00,0xFF,0x00,0x00,0x00,0x01,0x01,0xEF,0x09,0xE9,0x0F,0x69,0xCF,
0x89,0xF9,0xAF,0x81,0x81,0x00,0x00,0x00,0x03,0x0E,0xF8,0x20,0x20,0x20,0x20,0x21,
0x21,0xFF,0x00,0x00,0x00,0x00,0x30,0x31,0xA1,0xA3,0xAE,0xA8,0xA8,0xA8,0xAF,0xA1,
0xA1,0x33,0x32,0x00,0x00,0x8C,0x98,0xFF,0xFF,0xB0,0x94,0x48,0x68,0x08,0x08,0xFF,
0x10,0x10,0x00,0x00,0x30,0x21,0xFF,0x20,0x41,0x81,0xE3,0x9A,0x84,0x8E,0xB3,0xC1,
0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,
0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x06,0x0F,0x00,0x00,0x00,
0x00,0x00,0x03,0x04,0x08,0x08,0x08,0x07,0x00,0x00,0x07,0x08,0x08,0x08,0x08,0x07,
0x00,0x08,0x04,0x03,0x00,0x03,0x04,0x08,0x00,0x00,0x06,0x08,0x08,0x08,0x08,0x07,
0x00,0x00,0x03,0x04,0x08,0x08,0x08,0x07,0x00,0x00,0x0F,0x08,0x08,0x08,0x04,0x03,
0x00,0x00,0x03,0x04,0x08,0x08,0x04,0x83,0x80,0x00,0x08,0x08,0x0F,0x08,0x08,0x80,
0x00,0x00,0x07,0x08,0x08,0x08,0x08,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,
0xFF,0x03,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0xFD,0x01,0x01,0x01,
0x01,0x01,0x0D,0x15,0x25,0x45,0x85,0x05,0x01,0x01,0x79,0x85,0x85,0x85,0x85,0x79,
0x01,0x05,0x09,0x31,0xC1,0x31,0x09,0x05,0x01,0x01,0x19,0x05,0x05,0x85,0x85,0x79,
0x01,0x01,0x0D,0x15,0x25,0x45,0x85,0x05,0x01,0x01,0xFD,0x05,0x05,0x05,0x09,0xF1,
0x01,0x01,0xF1,0x09,0x05,0x05,0x09,0xF1,0x01,0x01,0x01,0x01,0xFD,0x01,0x01,0x01,
0x01,0x01,0x19,0x85,0x85,0x45,0x45,0x39,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,
0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x03,0xFF



};

Uchar code bmp2[]={
/*--  调入了一幅图像：D:\!Program\!Bmp_Sample\12832_1.bmp  --*/
/*--  宽度x高度=128x32  --*/
0xFF,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x81,0x81,0x81,0x81,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x80,0x80,0x80,0x80,
0x84,0x84,0xBF,0x84,0x84,0x80,0x83,0x9C,0x80,0x80,0xBC,0x83,0x80,0x80,0x80,0x80,
0x80,0x83,0x80,0x80,0x80,0x80,0xBF,0x80,0x80,0x80,0x80,0x83,0x80,0x80,0x80,0xFF,
0xFF,0x00,0x18,0x18,0x18,0x18,0x78,0x78,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,
0x00,0x00,0x78,0x78,0xF8,0xF8,0x80,0x80,0x81,0x81,0xFF,0xFF,0x7E,0x7E,0x00,0x00,
0x00,0x00,0x7E,0x7E,0xFF,0xFF,0x87,0x87,0x81,0x81,0xFF,0xFF,0x7E,0x7E,0x00,0x00,
0x00,0x00,0x1E,0x1E,0x1F,0x1F,0x01,0x01,0x01,0x01,0x1F,0x1F,0x1E,0x1E,0x00,0x00,
0x00,0x00,0x78,0x78,0xF8,0xF8,0x81,0x81,0x81,0x81,0xFF,0xFF,0x7E,0x7E,0x00,0x00,
0x00,0x00,0x78,0x78,0xF8,0xF8,0x80,0x80,0x81,0x81,0xFF,0xFF,0x7E,0x7E,0x00,0x00,
0x30,0xC0,0xFF,0x80,0x40,0x80,0x02,0x0E,0x32,0xC2,0x0A,0x06,0x83,0x40,0x00,0x00,
0x00,0xFE,0x02,0x02,0x02,0x02,0xFE,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0xFF,
0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,
0x00,0x00,0x07,0x07,0x1F,0x1F,0x79,0x79,0xE1,0xE1,0x81,0x81,0x01,0x01,0x00,0x00,
0x00,0x00,0x7E,0x7E,0xFF,0xFF,0x81,0x81,0xE1,0xE1,0xFF,0xFF,0x7E,0x7E,0x00,0x00,
0x00,0x00,0x07,0x07,0x9F,0x9F,0xF8,0xF8,0xF8,0xF8,0x9F,0x9F,0x07,0x07,0x00,0x00,
0x00,0x00,0x1E,0x1E,0x1F,0x1F,0x81,0x81,0x81,0x81,0xFF,0xFF,0x7E,0x7E,0x00,0x00,
0x00,0x00,0x07,0x07,0x1F,0x1F,0x79,0x79,0xE1,0xE1,0x81,0x81,0x01,0x01,0x00,0x00,
0x00,0x00,0x1F,0x12,0x12,0x12,0xFF,0x12,0x12,0x12,0x12,0x3F,0x10,0x00,0x00,0x02,
0x02,0x42,0x42,0x42,0x42,0x42,0x4F,0x4A,0x52,0x62,0xC2,0x46,0x02,0x00,0x00,0xFF,
0xFF,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x81,0x81,0x81,0x81,0x01,0x01,0x01,0x01,
0x01,0x01,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x01,0x01,
0x01,0x01,0x01,0x01,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x01,0x01,0x01,0x01,
0x01,0x01,0x81,0x81,0x81,0x81,0x01,0x01,0x01,0x01,0x81,0x81,0x81,0x81,0x01,0x01,
0x01,0x01,0x01,0x01,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x01,0x01,0x01,0x01,
0x01,0x01,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x01,0x01,
0x01,0x01,0xE1,0x41,0x41,0x41,0xF9,0x45,0x45,0x45,0x45,0xC5,0x05,0x1D,0x01,0x01,
0x01,0x01,0x01,0x01,0x09,0x05,0xF9,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0xFF,

};

 Uchar code bmp3[]={
/*--  调入了一幅图像：E:\工程文件\程序\图片\12232&12832.bmp  --*/
/*--  宽度x高度=128x32  --*/
0xFF,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x83,0x8F,0x8C,0x84,0x84,0x84,0x85,0x87,0x86,0x80,0x80,
0x80,0x80,0x80,0x80,0x8F,0x8F,0x8A,0x8A,0x8A,0x8A,0x8A,0x8F,0x8F,0x80,0x80,0x80,
0x80,0x80,0x88,0x8E,0x86,0x81,0x81,0x81,0x8F,0x8F,0x81,0x81,0x81,0x81,0x80,0x80,
0x80,0x84,0x84,0x87,0x8F,0x88,0x82,0x83,0x81,0x8F,0x8F,0x80,0x80,0x80,0x80,0x81,
0x81,0x8F,0x8F,0x81,0x81,0x81,0x81,0x8F,0x8F,0x81,0x81,0x81,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,
0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0xFF,0x80,0x80,0x80,0x80,0x80,0xFF,
0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x40,0xC0,0xFF,0xFF,0x0E,0x3F,0x71,0xC1,0x81,0x01,0x01,0x0F,0x0F,
0x00,0x00,0x01,0x03,0xBE,0xBE,0xAA,0xAF,0xFD,0xFB,0xAE,0xEE,0xEB,0x27,0x27,0x00,
0x00,0x81,0x83,0xFE,0xFE,0x07,0x0D,0x39,0xF1,0xE1,0x31,0x1D,0x0D,0x01,0x00,0x00,
0x88,0x98,0xB0,0xFF,0xFF,0xB8,0xD8,0x68,0x28,0xFF,0xFF,0x10,0x10,0x00,0x00,0x10,
0x31,0xFF,0xFF,0x41,0x01,0x71,0x7B,0xCE,0xCE,0x7B,0x71,0x01,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0xFF,
0xFF,0x00,0x00,0x10,0x18,0x1E,0x17,0x17,0x1E,0x18,0x10,0x00,0x0C,0x1E,0x13,0x11,
0x19,0x18,0x00,0x10,0x1F,0x1F,0x10,0x18,0x0F,0x07,0x00,0x00,0x00,0x08,0x1F,0x1F,
0x00,0x00,0x00,0x00,0x0C,0x1C,0x10,0x11,0x1F,0x0E,0x00,0x00,0x0C,0x1C,0x10,0x11,
0x1F,0x0E,0x00,0x00,0x08,0x18,0x12,0x12,0x1F,0x0D,0x00,0x00,0x0C,0x1C,0x10,0x11,
0x1F,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x1F,0x12,0x12,
0x7F,0x7F,0x12,0x12,0x1F,0x1F,0x00,0x00,0x00,0x00,0x02,0x06,0x1F,0x7F,0x60,0x00,
0x7F,0x7F,0x03,0x06,0x0C,0x08,0x00,0x00,0x00,0x00,0x1F,0x1F,0x11,0x11,0x7F,0x7F,
0x11,0x11,0x11,0x1F,0x1F,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0xFF,
0xFF,0x01,0x01,0x01,0x01,0x11,0xF1,0xF1,0x11,0x01,0x01,0x01,0x31,0x31,0x11,0x11,
0xF1,0xE1,0x01,0x11,0xF1,0xF1,0x11,0x31,0xE1,0xC1,0x01,0x01,0x01,0x11,0xF1,0xF1,
0x11,0x01,0x01,0x01,0x31,0x71,0xD1,0x91,0x11,0x11,0x01,0x01,0x31,0x71,0xD1,0x91,
0x11,0x11,0x01,0x01,0x21,0x31,0x11,0x11,0xF1,0xE1,0x01,0x01,0x31,0x71,0xD1,0x91,
0x11,0x11,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0xC1,0xC1,0x41,0x41,
0xF1,0xF9,0x49,0x49,0xC9,0xC9,0x39,0x39,0x01,0x01,0x01,0x01,0xF9,0xF9,0x41,0xC1,
0xF1,0xF9,0x09,0x09,0x09,0x39,0x39,0x01,0x01,0x01,0x81,0x81,0x01,0x01,0xF9,0xF9,
0x01,0x01,0x01,0x81,0x81,0x01,0x01,0x01,0x01,0xFF,0x01,0x01,0x01,0x01,0x01,0xFF,

};