#include "SWM341.h"
#include "string.h"
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <time.h>
#include "delay.h"

#define LIN_BPS	            19200
#define LIN_DELAY           4000
#define CAN_BPS             125000
#define XXTEAINUSE          1
#define XXTEAENCKEYS        0x01234567,0x89ABCDEF,0x01234567,0x89ABCDEF
#define XXTEADECKEYS        0xFECDBA98,0x76543210,0xFECDBA98,0x76543210

typedef struct
{
    uint8_t red;
    uint8_t green;
} led_t;
typedef struct
{
    led_t oiltemp;          //油温指示
    led_t oillevel;         //油位指示
    led_t waterlevel;       //水位指示
    led_t emerg;            //应急指示
    led_t power;            //电源指示
    led_t communicate;      //通信指示
    led_t outup;            //出口升
    led_t allup;            //出入升
    led_t inup;             //入口升
    led_t indown;           //入口降
    led_t outdown;          //出口降
    led_t alldown;          //出入降
} lamp_t;
extern lamp_t lamp;
#define lampaon		0x0f
#define lampron		0x08
#define lampgon		0x08
#define lampoff		0x00

#define OUTWATPUMP		7
#define OUTOILPUMP	  	6
#define OUTWALAMP0	  	5
#define OUTWALAMP1	  	4
#define OUTWATFAMN	  	3
#define OUTOILFAMN	  	2
#define OUTDNMOTOR	  	1
#define OUTNECCONT0	  	0

#define INOILLEVEL	  	1
#define INWATLEVEL	  	2

#define UPTIME	  		6000
#define DNTIME	  		3000
//#define UPTIME	  	3000
//#define DNTIME	  	2000
#define TEMPTHRE	65

#define EEPROM_ADDR	  0x1A000

typedef enum {TEMP = 0xF3, HUMID = 0xF5, TEMPHOLD = 0xE3, HUMIDHOLD = 0xE5, WRUSER = 0xE6, RDUSER = 0xE7, RESET = 0xFE} i2c_cmd_t;

extern CAN_RXMessage canrx, cantx;
extern uint8_t CANFrameReceiveFlag, CANFrameSendFlag;
extern __IO uint8_t cmd0_active, cmd1_active, cmd2_active, cmd3_active;
extern void SPKInit(void);
extern void SPKSet(uint8_t on, uint32_t frq);
extern void DelayUs(uint32_t us);
extern void UART0Init(void);
extern void UART1Init(void);
extern void UART2Init(void);
extern void UART3Init(void);
extern void CANInit(void);
extern void uart0_putchar(uint8_t ch);
extern void uart1_putchar(uint8_t ch);
extern uint32_t uart0_getbuf(uint8_t *buf);
extern void uart0_putbuf(uint8_t *buf, uint32_t len);
extern uint32_t uart1_getbuf(uint8_t *buf);
extern void uart1_putbuf(uint8_t *buf, uint32_t len);
extern uint32_t uart2_getbuf(uint8_t *buf);
extern void uart2_putbuf(uint8_t *buf, uint32_t len);
extern uint32_t uart3_getbuf(uint8_t *buf);
extern void uart3_putbuf(uint8_t *buf, uint32_t len);
extern void KEYInit(void);
extern void LEDInit(void);
extern void I2C0Init(void);
extern uint8_t KEYRead(void);
extern uint16_t DINRead(void);
extern uint16_t HTU20D_Read_Temperature_Humidity(i2c_cmd_t cmd);
extern uint16_t ADCRead(uint8_t ch);
extern void LampInit(void);
extern void ILI9486Test(void);
extern void Ws2812Lamp(uint8_t *buf, uint32_t len);
extern void CAN_Setup(void);
extern int CAN_SendMsg(CAN_RXMessage msg);
extern unsigned char xxtea(unsigned int *v, unsigned int n, unsigned int *k, unsigned int en);


extern void PCF8563_test(void);
extern time_t GetBuildTime(void);
extern void PCF8563_Get_Time(struct tm *Time);
extern void PCF8563_Set_Time(struct tm *Time);
extern void FM24V10_Test(void);
extern void SPI1Init(void);
extern void XT25F128B_Test(void);
extern void Lin_MainPutData(uint8_t id, uint8_t *data);
extern uint8_t Lin_MainGetData(uint8_t id, uint8_t *data);
extern void RFM008B_GPIO_Init(void);
extern void RFM008B_Init_Power(void);
extern uint8_t RFM008B_Read_ID(uint16_t *cid, uint64_t *nid);
extern void uart1_puts(char *str);