menu "IoT USB Host Modem"

    choice MODEM_TARGET
        prompt "Choose Modem Board"
        default MODEM_TARGET_ML302_DNLM

        config MODEM_TARGET_USER
            bool "User Defined"
        config MODEM_TARGET_NT26
            bool "NT26"
        config MODEM_TARGET_ML302_DNLM
            bool "ML302-DNLM/CNLM"
        config MODEM_TARGET_AIR724UG_NFM
            depends on n
            bool "AIR724UG-NFM"
        config MODEM_TARGET_AIR780_E
            bool "AIR780E"
        config MODEM_TARGET_EC600N_CNLA_N05
            bool "EC600NCNLA-N05"
            depends on n
        config MODEM_TARGET_EC600N_CNLC_N06
            bool "EC600NCNLC-N06"
        config MODEM_TARGET_A7600C1
            bool "A7600C1"
            depends on n
        config MODEM_TARGET_BG95_M3
            bool "BG95M3"
            depends on n
        config MODEM_TARGET_BG96_MA
            bool "BG96MA"
        config MODEM_TARGET_MC610_EU
            bool "MC610_EU"
        config MODEM_TARGET_EC20_CE
            bool "EC20_CE"
        config MODEM_TARGET_EG25_GL
            bool "EC25_GL"
        config MODEM_TARGET_YM310_X09
            bool "YM310_X09"
        config MODEM_TARGET_SIM7600E
            bool "SIM7600E"
        config MODEM_TARGET_A7670E
            bool "A7670E"
        config MODEM_TARGET_SIM7070G
            bool "SIM7070G"
        config MODEM_TARGET_SIM7080
            bool "SIM7080"
    endchoice

    config MODEM_TARGET_NAME
        string
        default "NT26" if MODEM_TARGET_NT26
        default "ML302-DNLM/CNLM" if MODEM_TARGET_ML302_DNLM
        default "EC600NCNLC-N06" if MODEM_TARGET_EC600N_CNLC_N06
        default "AIR780E" if MODEM_TARGET_AIR780_E
        default "BG95M3" if MODEM_TARGET_BG95_M3
        default "BG96MA" if MODEM_TARGET_BG96_MA
        default "MC610_EU" if MODEM_TARGET_MC610_EU
        default "EC20_CE" if MODEM_TARGET_EC20_CE
        default "EG25_GL" if MODEM_TARGET_EG25_GL
        default "YM310_X09" if MODEM_TARGET_YM310_X09
        default "SIM7600E" if MODEM_TARGET_SIM7600E
        default "A7670E" if MODEM_TARGET_A7670E
        default "SIM7070G" if MODEM_TARGET_SIM7070G
        default "SIM7080G" if MODEM_TARGET_SIM7080G
        default "User Defined" if MODEM_TARGET_USER

    config MODEM_SUPPORT_SECONDARY_AT_PORT
        bool "Enable Dual CDC Mode"
        depends on (MODEM_TARGET_MC610_EU || MODEM_TARGET_USER || MODEM_TARGET_EG25_GL || MODEM_TARGET_A7670E)
        default y if MODEM_TARGET_MC610_EU
        default y if MODEM_TARGET_EG25_GL
        default y if MODEM_TARGET_A7670E
        default n if MODEM_TARGET_USER

    menu "USB CDC interface config"
        visible if MODEM_TARGET_USER

        config MODEM_USB_ITF
            hex "Modem USB CDC interface"
            default 0x03 if MODEM_TARGET_NT26
            default 0x00 if MODEM_TARGET_ML302_DNLM
            default 0x04 if MODEM_TARGET_EC600N_CNLC_N06
            default 0x06 if MODEM_TARGET_MC610_EU
            default 0x05 if MODEM_TARGET_A7600C1
            default 0x02 if MODEM_TARGET_EC20_CE
            default 0x03 if MODEM_TARGET_AIR780_E
            default 0x03 if MODEM_TARGET_EG25_GL
            default 0x03 if MODEM_TARGET_YM310_X09
            default 0x02 if MODEM_TARGET_BG96_MA
            default 0x03 if MODEM_TARGET_SIM7600E
            default 0x04 if MODEM_TARGET_A7670E
            default 0x02 if MODEM_TARGET_SIM7070G
            default 0x02 if MODEM_TARGET_SIM7080G
            default 0x00 if MODEM_TARGET_USER
            help
                USB CDC interface (eg.0x00) used for send AT/data to device

        config MODEM_USB_ITF2
            hex "Modem USB CDC interface 2 (AT Only)"
            depends on MODEM_SUPPORT_SECONDARY_AT_PORT
            default 0x01 if MODEM_TARGET_USER
            default 0x05 if MODEM_TARGET_MC610_EU
            default 0x02 if MODEM_TARGET_EG25_GL
            default 0x05 if MODEM_TARGET_A7670E
            help
                USB CDC interface 2 (eg.0x01) used for send AT/data to device
    endmenu

    config MODEM_DIAL_RETRY_TIMES
        int "Retry Times During Dial-up"
        default 5
        help
            Set retry times waiting for modem link with carrier base station

    config MODEM_PPP_APN
        string "Set Modem APN"
        default "internet"
        help
            Set APN (Access Point Name), a logical name to choose data network

    config MODEM_SIM_PIN_PWD
        string "Set SIM PIN"
        default "1234"
        help
            Set Pin of sim card if have

    config MODEM_PRINT_DEVICE_DESCRIPTOR
        bool "Print device descriptor"
        default y

    menu "GPIO Config"
        config MODEM_POWER_GPIO
            int "Modem power control gpio, set 0 if not use"
            default 12
        config MODEM_RESET_GPIO
            int "Modem reset control gpio, set 0 if not use"
            default 13
        config MODEM_POWER_GPIO_INACTIVE_LEVEL
            int "Power control gpio inactive level"
            range 0 1
            default 1
        config MODEM_RESET_GPIO_INACTIVE_LEVEL
            int "Reset control gpio inactive level"
            range 0 1
            default 1
    endmenu

    menu "Timeout Config"
        config MODEM_COMMAND_TIMEOUT_DEFAULT
            int "Timeout (ms) for common AT command"
            default 2000
        config MODEM_COMMAND_TIMEOUT_OPERATOR
            int "Timeout (ms) for getting operator status"
            default 6000
        config MODEM_COMMAND_TIMEOUT_RESET
            int "Timeout (ms) for reset command"
            default 6000
        config MODEM_COMMAND_TIMEOUT_MODE_CHANGE
            int "Timeout (ms) for changing working mode"
            default 10000
        config MODEM_COMMAND_TIMEOUT_POWEROFF
            int "Timeout (ms) for power down"
            default 1000
    endmenu

    menu "Wi-Fi SoftAP"

        config MODEM_WIFI_SSID
            string "WiFi SSID"
            default "esp_4g_router"
            help
                SSID (network name) for the example to connect to.
        config MODEM_WIFI_PASSWORD
            string "WiFi Password"
            default "12345678"
            help
                WiFi password (WPA or WPA2) for the example to use.
        config MODEM_WIFI_CHANNEL
            int "WiFi Channel"
            range 1 13
            default 6
            help
                WiFi channel (network channel) for the example to use.
        choice
            prompt "WiFi Bandwidth"
            default WIFI_BANDWIFTH_40

            config WIFI_BANDWIFTH_20
                bool "20MHz"
            config WIFI_BANDWIFTH_40
                bool "40MHz"
        endchoice
        config MODEM_WIFI_MAX_STA
            int "Maximal STA connections"
            default 10
            help
                Max number of the STA connects to AP.
        config MODEM_WIFI_DEFAULT_DNS
            string  "WiFi softap default DNS address"
            default "8.8.8.8"
    endmenu

endmenu