------------------------------------------------------------------------------------------------------
                                       CANoe XCP FlexRay Demo
------------------------------------------------------------------------------------------------------
This sample configuration demonstrates how to use CANoe for the XCP on FlexRay communication.

To run the demo successfully, you have to start the XCP simulator "Start_XCPSim.bat" from the
directory <CANoe Sample Configuration Dir>\XCP_AMD\XCP_FlexRay or click the File button of the XCPTest 
panel:

- Assign the XCP simulator ("XCPsim FlexRay1") in the Vector Hardware Configuration Dialog to the same 
  channel as "CANoe FlexRay 1".
- If there is no XCP Simulator available please start it once to add the simulator to the Vector 
  Hardware Configuration Dialog.


In the XCP Window:

- The XCP signals ampl, period, testString, channel2 and channel3 are configured for the DAQ 
  measurement with 10ms.
- Use Value column to change parameters, e.g. ampl or period.

The test module tests the connection of the device and changes values of XCP signals ampl, period and
testString.
While manipulating the amplitude and period, you can observe the changes of signals channel2 and 
channel3 in the Graphics and Data window.

------------------------------------------------------------------------------------------------------
Copyright (c) by Vector Informatik GmbH Dep. Tools Automotive  2018
------------------------------------------------------------------------------------------------------