Definition of XML test modules for Vector CANoe/DENoe Test Feature Set. Schema definition for CANoe 7.0. Root element of every XML test module. Test Module Group of test cases or nested test groups. Can be used to structure a test module (like chapters in a book) and to define group-wise constraints, conditions or preparation/completion patterns. Test Group Definition of templates, especially test case templates. Templates Test case defined by a sequence of test patterns. Test Case Definition of a parameter in a template. Parameter Definition One or more instances of one template. Template Instances Instance of a test case. Test Case Instance Definition of parameter value of a template instance. Parameter Test case defined by a sequence of test patterns. Test Case Test case implemented in CAPL. The test case in a CAPL test case library is called. The CAPL test case is identified by its name. It is called with the given parameters. Title and identifier of this test case can be defined in XML or in the CAPL code (CAPL code overwrites definitions in XML). CAPL Test Case Actual parameter of a called CAPL test case. Only numerical values and strings can be passed to a CAPL test case. Parameter The global section is used for Vector internal purposes only. Don't use this section. Global Section The sequence of test patterns in the preparation section is executed before the conditions/constraints are started and before the actual pattern sequence of the test module, test group or test case. If a pattern fails, only the completion section of the test module, test group or test case is execute but not the constraints/conditions or the actual pattern sequence respective sequence of test cases or test groups. Some operations (exspecially setting variables) are only allowed within preparation. Preparation The pattern sequence in completion will be executed even if the test module, test group or test case is canceled (e.g. by a fail). Patterns in completion may be used to define some "tidy up" procedures that must be executed in any case. Completion In the constraints section checks may be defined. These checks are checked during the test course in parallel to the pattern sequence. Results are written to the report and influence the test verdict, but not the test course itself. The constraints section is used for checking the test environment ("Do I have a valid check environment?"). Constraints In the conditions section checks may be defined. These checks are checked during the test course in parallel to the pattern sequence. Results are written to the report and influence the test verdict, but not the test course itself. The conditions section is used for checking the SUT, i.e. these checks are part of the acutal test. Conditions Definition of a variable (set once, read multiple) that can be used within the XML test module. The variable has no meaning within other parts of CANoe. A constant value is given or the value is read from a signal. Variable Definition Definition of a variable (set once, read multiple) that can be used within the XML test module. The variable has no meaning within other parts of CANoe. The variable value is requested from the user using a dialog box. Variable Definition by Tester Definition of a CANoe system variable (set once, read multiple). A system variable defined by the XML test module can be used in CANoe (read only). System Variable Definition This element is used to use a variable that is defined within the XML test module (something like reading a variable). The var element is used instead of literal data. Variable Comparison operator "equal" or operator "becomes"; this is the default operator if no operator is given. = Comparison operator "not equal". != Comparison operator "lesser than". < Comparison operator "greater than". > Comparison operator "lesser or equal". <= Comparison operator "greater or equal". >= Comparison operator "range". A given range includes the values defined by "from" and "to". Range Lower limit of a range. Value is included in the range. From Upper limit of a range. Value is included in the range. To Comparison operator "one_of". True, if one of the included conditions match. One Of Definition of a signal from the CAN bus (set or check, depends on context). CAN Signal Definition of a signal from the LIN bus (set or check, depends on context). LIN Signal Definition of a signal from the LIN bus (set or check, depends on context). FlexRay Signal Definition of an environment variable value (set or check, depends on context). Environment Variable Definition of an system variable value (set or check, depends on context). System Variable Definition of an CAN message (set or check, depends on context). CAN Message Definition of an LIN frame (set or check, depends on context). LIN Frame Definition of an MOST message (set or check, depends on context). MOST Message Definition of an MOST system message (set or check, depends on context). MOST System Message Definition of an J1939 PG (set or check, depends on context). J1939 PG Signal of a message (set or check, depends on context). Signal Data byte of a message (set or check, depends on context). Byte Signal of a message. The signal value is checked against the value the referenced signal of another message. This element can be used only within the check "requestresponsecheck". Signal Reference Data byte of a message. The byte value is checked against the value the referenced data byte of another message. This element can be used only within the check "requestresponsecheck". Byte Reference Parameter of a MOST message (set or check, depends on context). Parameter Definition of a network node. Node Definition of a node in a J1939 network. J1939 Node Definition of list of MOST function blocks or functions. This list is used to define function blocks or functions that should be explicitely considered. Include List Definition of list of MOST function blocks. This list is used to define function blocks that should be not considered. Exclude List Definition of an exception list of MOST function blocks or MOST functions. Exception List Definition of a MOST functin block (FBlock). FBlock Definition of a MOST function. Function Definition of a J1939 sender node. Sender Definition of a J1939 receiver node. Receiver Definition of a J1939 command PG. J1939 Command PG Information (list of name/value pairs) about the test engineer. Engineer Information (list of name/value pairs) about the test setup. Test Setup Information (list of name/value pairs) about the system under test (SUT). System Under Test Additional, miscellaneous block of information (list of name/value pairs). Miscellaneous Information Additional information in an arbitrary format (e.g. HTML). Extended Information Comments within a test course. Will be copied into the report. Comment Report a current value, e.g. an actual CAN signal or value of an environment variable. A description can be given to describe what value is reported and why it is reported. Value Comment Information as a name/description pair. Information A name. Name Description text. Description List of variants used in the XML test module. Variants Defines a variant in the XML test module. The variant is defined by its short name (to identify the variant within the XML text, the attribute "name") and a long name that is used at the user interface (this is the content of the element "variant"). Variant Variant depending value of a variable definition. Value Reference to an external entity (e.g. to a DOORS requirement). External Reference Check: Absolute cycle time supervision. Absolut Cycle Time Check: Relative cycle time supervision. Relative Cycle Time Check: Message distance supervision. Message Distance Definition of reference message within check "message distance supervision". Reference Message Definition of observed message within check "message distance supervision". Observed Message Check: Signal value supervision. Signal Value Check: Node babbling. Node Inactive Check: Node dead. Node Active Check: Signal value change. Signal Value Constancy Check: Timeout. Timeout Check: Undefined message received. Unknown Message Received Check: Error Frame Check: DLC supervision. DLC Monitoring Check: Value invariant supervision. Values Invariant Precondition in value invariant supervision check. While this condition is true the matching value has to be true. Value Precondition Matching value of value invariant supervision check. Matching Value Check: Relative message occurrence supervision. Occurrence of a Message Check: Message routing observing check (e.g. for Gateway-tests). Request Response Check Check: Fallback reaction check (e.g. for Gateway-tests). Fallback Observation Element is part of the fallback check. If the event defined here is missing for a defined time, the fallback action is checked. Drop Out Element is part of the fallback check. The fallback action is defined with this element. Fallback Check: Absence of defined messages. Absence of Defined Messages Check (MOST specific): Property protocol error check. MOST Protocol Observation Check (MOST specific): Light and lock state check. MOST Light&Lock Observation Check (MOST specific): NetState check. MOST NetState Observation Check (MOST specific): Error message (occurrance) check. MOST Error Messages Check (J1939 specific): Address claiming violation check. J1939 Address Claiming Check (J1939 specific): Request violation check. J1939 Request Check (J1939 specific): Broadcast Announce Message (BAM) violation check. J1939 BAM Check (J1939 specific): Relative cycle time violation check. J1939 Relative Cycle Time Check (J1939 specific): Absolute cycle time violation check. J1939 Absolute Cycle Time Check (J1939 specific): Transport Protocol (RTS / CTS) violation check. J1939 RTS/CTS Check (J1939 specific): Undefined J1939 PG received check. J1939 Messages Known Check (J1939 specific): Domain rules check. J1939 Rules Specific Test pattern: Wait for specified time. Wait Test pattern: Initialization of a vector, then wait. Initialize Test pattern: Set input vector, wait, then check target vector. State Change Test pattern: Input vector of statechange pattern. Stimulation Test pattern: Target vector of statechange pattern. Expected Test pattern: Wait, then check target vector. State Check Test pattern: Send message, then wait for response. Request Response Definition of request in requestresponse check or pattern. Request Definition of response in requestresponse check or pattern. Response Test pattern: Replay a log/macro file. Replay Test pattern: Stimulate signal with a ramp signal. Stimulate Ramp Test pattern: Call a diagnostics service and check response. Diagnostics Service Check Test pattern: Parameter of a diagnostics request or response. Value Test pattern: Wait until test case is stopped by user. Until End Test pattern: Pops up a dialog for tester confirmation with yes or no. Tester Confirmation Test pattern: Execute external program. System Call Name of program to be executed by system call pattern. Program Name Expected exit code of executed program (system call pattern). Expected Exit Code Test pattern: configure an attached CANstress device. CANstress Configuration Parameter of CANstress test pattern. Base Configuration Parameter of CANstress test pattern. Analog Configuration Parameter of CANstress test pattern. Resistor Configuration Parameter of CANstress test pattern. Digital Configuration Parameter of CANstress test pattern. BTR0 Parameter of CANstress test pattern. BTR1 Parameter of CANstress test pattern. Trigger Parameter of CANstress test pattern. Message Range Parameter of CANstress test pattern. Disturbance Parameter of CANstress test pattern. Limited Number Parameter of CANstress test pattern. Unlimited Number Parameter of CANstress test pattern. Continuous Parameter of CANstress test pattern. Bit Sequence Test pattern: Start again last CANstress configuration. CANstress State Test pattern (MOST specific): Verify existence of FBlocks in device. MOST FBlock Existence Test pattern (MOST specific): Check if NetBlock corresponds to FBlocks in device. MOST NetBlock Complete Test pattern (MOST specific): Check given FktIDs for existence in FBlock. MOST Functions in FBlock Test pattern (MOST specific): Performs generic FBlock test from MOST Compliance Test Specification V1.0. MOST Generic FBlock Test Test pattern (MOST specific): Verifies the assumption of a given function to be a property. MOST Is Property Test pattern (J1939 specific): send command and wait for response. J1939 Command Response Test pattern (J1939 specific): send request and wait for response. J1939 Request Response Test pattern (J1939 specific): Request ACL. J1939 Request ACL Test pattern (J1939 specific): Conflict ACL. J1939 ACL Conflict Test pattern (J1939 specific): Command address. J1939 Commanded Address