StaticTextControl8 448, 15 70, 172 Window (this is used by the simulation node in the demo). StaticTextControl7 450, 32 60, 219 Window Now the tester dialog opens and can be used to query OBD compliant controllers on the network. StaticTextControl6 458, 20 60, 193 Window 4. Confirm the dialog with OK. StaticTextControl5 495, 31 60, 154 Window 3. Configure the OBD-II setting to 'Use 11-bit 'Normal' addressing' StaticTextControl4 472, 17 60, 131 Window 2. Select the CAN Network 'Powertrain'. StaticTextControl3 472, 17 60, 108 Window 1. Use the ribbon to navigate to Diagnostics && XCP | Diagnostics/ISO TP. StaticTextControl2 437, 24 57, 87 Window To assign a tester dialog to the network 'PowerTrain' StaticTextControl12 284, 18 60, 16 Window Microsoft Sans Serif, 8.25pt, style=Bold OBD-II Tester (On-Board Diagnostics) PictureBoxControl4 48, 50 6, 13 Bitmaps\vInfo.png StaticTextControl1 458, 44 60, 40 Window The OBD dialog makes it possible to carry out emission related on-board diagnostis. In this sample configuration the ECU "Engine" on network "PowerTrain" simulates the diagnostics responses of an OBD compliant controller. GroupBoxControl1 564, 260 7, 3 Window 0 Panel1 581, 271 Window