<?xml version="1.0" encoding="utf-8" standalone="no"?>
<IP xmlns="http://mcd.rou.st.com/modules.php?name=mcu" DBVersion="V4.0" Name="RCC" Version="STM32Cube_FW_L0_V1.6.0" IncludeFile="stm32l0xx_ll_crs.h;stm32l0xx_ll_rcc.h;stm32l0xx_ll_bus.h;stm32l0xx_ll_system.h;stm32l0xx_ll_exti.h;stm32l0xx_ll_cortex.h;stm32l0xx_ll_utils.h;stm32l0xx_ll_pwr.h;stm32l0xx_ll_dma.h" 
    xmlns:ns0="http://www.w3.org/2001/XMLSchema-instance" ns0:schemaLocation="http://mcd.rou.st.com/modules.php?name=mcu ../../../../../../../../doc/V4/Development/Specifications/db/IP_Configs.xsd">

    <RefConfig Name="RCC_OSCConfig">
      
        <!--flash latency configuration-->

        <IFCondition Expression ="1=1">

            <CallLibMethod Name="LL_FLASH_SetLatency">
                <MethodArg Name="Latency" ParameterName="FLatency"/>
            
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="FLatency=FLASH_LATENCY_0">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#twhile(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_0)#n#t{#n#t}"/>
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="FLatency=FLASH_LATENCY_1">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#twhile(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_1)#n#t{#n#t}"/>
            </CallLibMethod>
        </IFCondition>
     

        <!--voltage scaling configuration-->
        <IFCondition Expression ="1=1">

            <CallLibMethod Name="LL_PWR_SetRegulVoltageScaling">
                <MethodArg Name="VoltageScaling" ParameterName="PWR_Regulator_Voltage_Scale"/>
            
            </CallLibMethod>
        </IFCondition>

        <!--Clock source activation-->
      

        <IFCondition Expression ="HSEUsed=1 &amp; HSEByPass ">
            <CallLibMethod Name="LL_RCC_HSE_EnableBypass" />
        </IFCondition>
     
		
        <IFCondition Expression ="HSEUsed=1">
            <CallLibMethod Name="LL_RCC_HSE_Enable"/>
   
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till HSE is ready */#n#twhile(LL_RCC_HSE_IsReady() != 1)#n#t{#n#t#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>   
  
        <IFCondition Expression ="HSIUsed=1 &amp; (HSIRCDiv=4)">
            <CallLibMethod Name="LL_RCC_HSI_EnableDivider"/>
     
        </IFCondition>
		
        <IFCondition Expression ="HSIUsed=1">
            <CallLibMethod Name="LL_RCC_HSI_Enable"/>
     
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till HSI is ready */#n#twhile(LL_RCC_HSI_IsReady() != 1)#n#t{#n#t#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>  

		
        <IFCondition Expression ="HSIUsed=1">
            <CallLibMethod Name="LL_RCC_HSI_SetCalibTrimming">
                <MethodArg Name="Value" ParameterName="HSICalibrationValue"/>
            </CallLibMethod>
        </IFCondition>
		
        <IFCondition Expression ="HSI48Used=1">
            <CallLibMethod Name="LL_RCC_HSI48_Enable"/>

            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till HSI48 is ready */#n#twhile(LL_RCC_HSI48_IsReady() != 1)#n#t{#n#t#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>
		
	
	
				
        <IFCondition Expression ="LSIUsed=1">
            <CallLibMethod Name="LL_RCC_LSI_Enable"/>

            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till LSI is ready */#n#twhile(LL_RCC_LSI_IsReady() != 1)#n#t{#n#t#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>
		
        <IFCondition Expression ="MSIUsed=1">
            <CallLibMethod Name="LL_RCC_MSI_Enable"/>

            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till MSI is ready */#n#twhile(LL_RCC_MSI_IsReady() != 1)#n#t{#n#t#t#n#t}"/>
            </CallLibMethod>
			
        </IFCondition>
		

		

		
        <IFCondition Expression ="MSIUsed=1">
            <CallLibMethod Name="LL_RCC_MSI_SetRange">
                <MethodArg Name="Range" ParameterName="MSIClockRange"/>
            </CallLibMethod>
        </IFCondition>
		
        <IFCondition Expression ="MSIUsed=1">
            <CallLibMethod Name="LL_RCC_MSI_SetCalibTrimming">
                <MethodArg Name="Value" ParameterName="MSICalibrationValue"/>
            </CallLibMethod>
        </IFCondition>

		        <IFCondition Expression ="RTCUsed_ForRCC|(LSEUsed=1)">
            <CallLibMethod Name="LL_PWR_EnableBkUpAccess">
            </CallLibMethod>
        </IFCondition> 	
	
		
        <!--LSCO  code gen-->

        <IFCondition Expression ="LSEUsed=1 &amp; LSEByPass">
            <CallLibMethod Name="LL_RCC_LSE_EnableBypass"/>
        </IFCondition>
        <IFCondition Expression ="LSEOscillator &amp;(LSEUsed=1)">
            <CallLibMethod Name="LL_RCC_LSE_SetDriveCapability">
			 <MethodArg Name="LSEDrive" ParameterName="LSE_Drive_Capability"/>
            </CallLibMethod>
        
        </IFCondition> 
				
        <IFCondition Expression ="LSEUsed=1">
            <CallLibMethod Name="LL_RCC_LSE_Enable"/>
         
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till LSE is ready */#n#twhile(LL_RCC_LSE_IsReady() != 1)#n#t{#n#t#t#n#t}"/>
            </CallLibMethod>
        </IFCondition> 

        <IFCondition Expression ="RTCUsed_ForRCC &amp; RTCClockSelectionForLL=LL_RCC_RTC_CLKSOURCE_LSI">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#tif(LL_RCC_GetRTCClockSource() != LL_RCC_RTC_CLKSOURCE_LSI)#n#t{"/>
            </CallLibMethod>
        <Else>
            <IFCondition Expression ="RTCUsed_ForRCC &amp; RTCClockSelectionForLL=LL_RCC_RTC_CLKSOURCE_LSE">
                <CallLibMethod Name="" Type="HardCode">
                    <HardCode Text="#tif(LL_RCC_GetRTCClockSource() != LL_RCC_RTC_CLKSOURCE_LSE)#n#t{"/>
                </CallLibMethod>
                <Else>
                    <IFCondition Expression ="RTCUsed_ForRCC &amp; RTCClockSelectionForLL=LL_RCC_RTC_CLKSOURCE_HSE">
                        <CallLibMethod Name="" Type="HardCode">
                            <HardCode Text="#tif(LL_RCC_GetRTCClockSource() != LL_RCC_RTC_CLKSOURCE_HSE)#n#t{"/>
                            </CallLibMethod>
                    </IFCondition>
                </Else>
            </IFCondition>
        </Else>
        </IFCondition>

        <IFCondition Expression ="RTCUsed_ForRCC">
            <CallLibMethod Name="#tLL_RCC_ForceBackupDomainReset">
            </CallLibMethod>

            <CallLibMethod Name="#tLL_RCC_ReleaseBackupDomainReset">
            </CallLibMethod>
        </IFCondition>

        <IFCondition Expression ="RTCUsed_ForRCC|LCDUsed_ForRCC">
            <CallLibMethod Name="#tLL_RCC_SetRTCClockSource">
                <MethodArg Name="Source" ParameterName="RTCClockSelectionForLL"/>
            </CallLibMethod>
        </IFCondition>
	    
        <IFCondition Expression ="RTCUsed_ForRCC">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#t}"/>
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="(RTCUsed_ForRCC|LCDUsed_ForRCC) ">
            <CallLibMethod Name="LL_RCC_SetRTC_HSEPrescaler">
                <MethodArg Name="Div" ParameterName="HSEDivRTC"/>
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="RTCUsed_ForRCC|LCDUsed_ForRCC">
            <CallLibMethod Name="LL_RCC_EnableRTC"/>
        </IFCondition>
		
			

		
        <!--CSS enable code gen-->
        <IFCondition Expression ="CSSEnabled">
            <CallLibMethod Name="LL_RCC_HSE_EnableCSS"/>
        </IFCondition>
		
        <IFCondition Expression ="RCC_LSECSS_ENABLED">
            <CallLibMethod Name="LL_RCC_LSE_EnableCSS"/>
        </IFCondition>
		
		
		
        <!--PLL configuration-->
		
        <IFCondition Expression ="PLLUsed=1">
            <CallLibMethod Name="LL_RCC_PLL_ConfigDomain_SYS">
                <MethodArg Name="Source" ParameterName="PLLSourceVirtual"/>
                <MethodArg Name="PLLMul" ParameterName="PLLMUL"/>
                <MethodArg Name="PLLDiv" ParameterName="PLLDIV"/>
            </CallLibMethod>
        </IFCondition>
		
		

		
        <!--PLL activation-->

   
		
        <IFCondition Expression ="PLLUsed=1">
            <CallLibMethod Name="LL_RCC_PLL_Enable"/>
   
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till PLL is ready */#n#twhile(LL_RCC_PLL_IsReady() != 1)#n#t{#n#t#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>
		
		
		
        <!--PLLSAI1 configuration-->

		


        <IFCondition Expression ="1=1">

            <CallLibMethod Name="LL_RCC_SetAHBPrescaler">
                <MethodArg Name="Prescaler" ParameterName="AHBCLKDivider"/>
            </CallLibMethod>
        </IFCondition>

     
        <IFCondition Expression ="1=1">

            <CallLibMethod Name="LL_RCC_SetAPB1Prescaler">
                <MethodArg Name="Prescaler" ParameterName="APB1CLKDivider"/>
            </CallLibMethod>
        </IFCondition>

     
        <IFCondition Expression ="1=1">

            <CallLibMethod Name="LL_RCC_SetAPB2Prescaler">
                <MethodArg Name="Prescaler" ParameterName="APB2CLKDivider"/>
            </CallLibMethod>
        </IFCondition>

        <!--sys clock source + AHB/APB configuration-->
        <IFCondition Expression ="1=1">

            <CallLibMethod Name="LL_RCC_SetSysClkSource">
                <MethodArg Name="Source" ParameterName="SYSCLKSource"/>
            </CallLibMethod>
        
        
        </IFCondition>
        <IFCondition Expression ="PLLscale">

            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till System clock is ready */#n#twhile(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)#n#t{#n#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="HSEscale">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till System clock is ready */#n#twhile(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSE)#n#t{#n#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="SysSourceHSI">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till System clock is ready */#n#twhile(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSI)#n#t{#n#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="SysSourceMSI">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till System clock is ready */#n#twhile(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_MSI)#n#t{#n#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>

        <!--system core frequency set,systick init,systick priority configuration-->
        <IFCondition Expression ="USE_FULL_LL_DRIVER">
             <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n"/>
            </CallLibMethod>
            <CallLibMethod Name="LL_Init1msTick">
                <MethodArg Name="HCLKFrequency" ParameterName="TimerFreq_Value"/>
            
            </CallLibMethod>
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n"/>
            </CallLibMethod>
        </IFCondition>
 
        <IFCondition Expression ="1=1">

            <CallLibMethod Name="LL_SetSystemCoreClock">
                <MethodArg Name="HCLKFrequency" ParameterName="HCLKFreq_Value"/>
            
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="!USE_FULL_LL_DRIVER">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Update the time base */"/>
            </CallLibMethod>
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#tif (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)#n#t{#n#t#tError_Handler();#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>
        <!--peripheral clock source configuration -->
        <IFCondition Expression ="USART1Used_ForRCC">
            <CallLibMethod Name="LL_RCC_SetUSARTClockSource">
                <MethodArg Name="USARTxSource" ParameterName="Usart1ClockSelection"/>
            </CallLibMethod>
        </IFCondition>
			
        <IFCondition Expression ="USART2Used_ForRCC">
            <CallLibMethod Name="LL_RCC_SetUSARTClockSource">
                <MethodArg Name="USARTxSource" ParameterName="Usart2ClockSelection"/>
            </CallLibMethod>
        </IFCondition>
		
        <IFCondition Expression ="LPUARTUsed_ForRCC">
            <CallLibMethod Name="LL_RCC_SetLPUARTClockSource">
                <MethodArg Name="LPUARTxSource" ParameterName="Lpuart1ClockSelection"/>
            </CallLibMethod>
        </IFCondition>
	
		
        <IFCondition Expression ="I2C1Used_ForRCC">
            <CallLibMethod Name="LL_RCC_SetI2CClockSource">
                <MethodArg Name="I2CxSource" ParameterName="I2c1ClockSelection"/>
            </CallLibMethod>
        </IFCondition>
		
        <IFCondition Expression ="I2C3Used_ForRCC">
            <CallLibMethod Name="LL_RCC_SetI2CClockSource">
                <MethodArg Name="I2CxSource" ParameterName="I2c3ClockSelection"/>
            </CallLibMethod>
        </IFCondition>
		


        <IFCondition Expression ="LPTIMUsed_ForRCC">
            <CallLibMethod Name="LL_RCC_SetLPTIMClockSource">
                <MethodArg Name="LPTIMxSource" ParameterName="LptimClockSelection"/>
            </CallLibMethod>
        </IFCondition>


        <IFCondition Expression ="RNGUsed_ForRCC">
            <CallLibMethod Name="LL_RCC_SetRNGClockSource">
                <MethodArg Name="RNGxSource" ParameterName="HSI48MClockSelection"/>
            </CallLibMethod>
        </IFCondition>
		
        <IFCondition Expression ="USB_OTG_FSUsed_ForRCC|USB_OTG_HSEmbeddedPHYUsed_ForRCC|USBUsed_ForRCC">
            <CallLibMethod Name="LL_RCC_SetUSBClockSource">
                <MethodArg Name="USBxSource" ParameterName="HSI48MClockSelection"/>
         
            </CallLibMethod>
        </IFCondition>
		
	
		
   
 
		
        <!--MCO clock source -->
        <IFCondition Expression ="((SEM2RCC_MCO_REQUIRED_TIM21 &amp; TIM21 &amp; Semaphore_input_Channel1TIM21)|MCOConfig)">
            <CallLibMethod Name="LL_RCC_ConfigMCO">
                <MethodArg Name="MCOxPrescaler" ParameterName="RCC_MCODiv"/>
                <MethodArg Name="MCOxSource" ParameterName="RCC_MCOSource"/>
            </CallLibMethod>
        </IFCondition>
		
	   
   
	    <!--CRS PARAM -->
		    <IFCondition Expression ="EnableCRS">
            <CallLibMethod Name="LL_APB1_GRP1_EnableClock">
                <MethodArg Name="Periphs" ParameterName="PERIPH_CRSAEG"/>
            </CallLibMethod>
        </IFCondition>  
		
		    <IFCondition Expression ="EnableCRS">
            <CallLibMethod Name="LL_APB1_GRP1_ForceReset">
                <MethodArg Name="Periphs" ParameterName="PERIPH_CRSAEG"/>
            </CallLibMethod>
        </IFCondition>  
		
		    <IFCondition Expression ="EnableCRS">
            <CallLibMethod Name="LL_APB1_GRP1_ReleaseReset">
                <MethodArg Name="Periphs" ParameterName="PERIPH_CRSAEG"/>
            </CallLibMethod>
        </IFCondition>  
		
		
        <IFCondition Expression ="EnableCRS">
            <CallLibMethod Name="LL_CRS_SetSyncDivider">
                <MethodArg Name="Divider" ParameterName="Prescaler"/>
            </CallLibMethod>
        </IFCondition>  
		
		<IFCondition Expression ="EnableCRS">
            <CallLibMethod Name="LL_CRS_SetSyncPolarity">
                <MethodArg Name="Divider" ParameterName="Polarity"/>
            </CallLibMethod>
        </IFCondition>

		<IFCondition Expression ="EnableCRS">
            <CallLibMethod Name="LL_CRS_SetSyncSignalSource">
                <MethodArg Name="Source" ParameterName="Source"/>
            </CallLibMethod>
        </IFCondition>
	
		
		<IFCondition Expression ="EnableCRS">
            <CallLibMethod Name="LL_CRS_SetReloadCounter">
                <MethodArg Name="Value" ParameterName="ReloadValueARGLL"/>
            </CallLibMethod>
        </IFCondition>
		<IFCondition Expression ="EnableCRS">
            <CallLibMethod Name="LL_CRS_SetFreqErrorLimit">
                <MethodArg Name="Value" ParameterName="ErrorLimitValue"/>
            </CallLibMethod>
        </IFCondition>
		<IFCondition Expression ="EnableCRS">
            <CallLibMethod Name="LL_CRS_SetHSI48SmoothTrimming">
                <MethodArg Name="Value" ParameterName="HSI48CalibrationValue"/>
            </CallLibMethod>
        </IFCondition>
		
	   
    </RefConfig>

    <LibMethod Comment="" Name="LL_PWR_SetRegulVoltageScaling">
        <Argument AddressOf="false" GenericType="simple" Name="VoltageScaling"/>
    </LibMethod>
    <LibMethod Comment="" Name="LL_FLASH_SetLatency">
        <Argument AddressOf="false" GenericType="simple" Name="FLatency"/>
    </LibMethod>
    <LibMethod Comment="" Name="LL_RCC_LSE_SetDriveCapability">
        <Argument AddressOf="false" GenericType="simple" Name="LSEDrive"/>
    </LibMethod>
    <LibMethod Comment="" Name="LL_RCC_HSE_EnableCSS"/>
          
    <LibMethod Comment="" Name="LL_RCC_HSE_EnableBypass" />
    
    <LibMethod Comment="" Name="LL_RCC_HSE_Enable"/>

    <LibMethod Comment="" Name="LL_RCC_HSI_Enable"/>
    
    <LibMethod Comment="" Name="LL_RCC_HSI48_Enable"/>
  
    <LibMethod Comment="" Name="LL_RCC_LSE_Enable"/>
	
    <LibMethod Comment="" Name="LL_RCC_LSE_EnableBypass"/>
	
    <LibMethod Comment="" Name="LL_RCC_LSE_EnableCSS"/>
	
    <LibMethod Comment="" Name="LL_RCC_LSI_Enable"/>
	
    <LibMethod Comment="" Name="LL_RCC_MSI_Enable"/>
    <LibMethod Comment="" Name="LL_RCC_HSI_EnableDivider"/>

    <LibMethod Comment="" Name="LL_RCC_MSI_SetRange">
        <Argument AddressOf="false" GenericType="simple" Name="Range"/>
    </LibMethod>
    <LibMethod Comment="" Name="LL_RCC_MSI_SetCalibTrimming">
        <Argument AddressOf="false" GenericType="simple" Name="Value"/>
    </LibMethod>
    <LibMethod Comment="" Name="LL_RCC_HSI_SetCalibTrimming">
        <Argument AddressOf="false" GenericType="simple" Name="Value"/>
    </LibMethod>
	

    <LibMethod Comment="" Name="LL_RCC_SetSysClkSource">
        <Argument AddressOf="false" GenericType="simple" Name="Source"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetAHBPrescaler">
        <Argument AddressOf="false" GenericType="simple" Name="Prescaler"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetAPB1Prescaler">
        <Argument AddressOf="false" GenericType="simple" Name="Prescaler"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetAPB2Prescaler">
        <Argument AddressOf="false" GenericType="simple" Name="Prescaler"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_ConfigMCO">
        <Argument AddressOf="false" GenericType="simple" Name="MCOxSource"/>
        <Argument AddressOf="false" GenericType="simple" Name="MCOxPrescaler"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetUSARTClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="USARTxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetLPUARTClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="LPUARTxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetUARTClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="UARTxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetI2CClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="I2CxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetLPTIMClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="LPTIMxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetSAIClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="SAIxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetSDMMCClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="SDMMCxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetRNGClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="RNGxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetUSBClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="USBxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetADCClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="ADCxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetSWPMIClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="SWPMIxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetDFSDMClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="DFSDMxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="#tLL_RCC_SetRTCClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="Source"/>
    </LibMethod>
    <LibMethod Comment="" Name="LL_RCC_SetRTC_HSEPrescaler">
        <Argument AddressOf="false" GenericType="simple" Name="Div"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_EnableRTC"/>
	
    <LibMethod Comment="" Name="LL_PWR_EnableBkUpAccess"/>
    <LibMethod Comment="" Name="#tLL_RCC_ForceBackupDomainReset"/>
    <LibMethod Comment="" Name="#tLL_RCC_ReleaseBackupDomainReset"/>
    <LibMethod Comment="" Name="LL_RCC_PLL_Enable"/>
	
    <LibMethod Comment="" Name="LL_RCC_PLL_ConfigDomain_SYS">
        <Argument AddressOf="false" GenericType="simple" Name="Source"/>
        <Argument AddressOf="false" GenericType="simple" Name="PLLMul"/>
        <Argument AddressOf="false" GenericType="simple" Name="PLLDiv"/>
    </LibMethod>



    <LibMethod Comment="" Name="LL_SetSystemCoreClock">
        <Argument AddressOf="false" GenericType="simple" Name="HCLKFrequency"/>
    </LibMethod>
    <LibMethod Comment="" Name="LL_Init1msTick">
        <Argument AddressOf="false" GenericType="simple" Name="HCLKFrequency"/>
    </LibMethod>
	    <LibMethod Comment="" Name="LL_APB1_GRP1_EnableClock">
        <Argument AddressOf="false" GenericType="simple" Name="Periphs"/>
    </LibMethod>
	    <LibMethod Comment="" Name="LL_APB1_GRP1_ForceReset">
        <Argument AddressOf="false" GenericType="simple" Name="Periphs"/>
    </LibMethod>
	    <LibMethod Comment="" Name="LL_APB1_GRP1_ReleaseReset">
        <Argument AddressOf="false" GenericType="simple" Name="Periphs"/>
    </LibMethod>
	    <LibMethod Comment="" Name="LL_CRS_SetSyncDivider">
        <Argument AddressOf="false" GenericType="simple" Name="Divider"/>
    </LibMethod>
	    <LibMethod Comment="" Name="LL_CRS_SetSyncPolarity">
        <Argument AddressOf="false" GenericType="simple" Name="Polarity"/>
    </LibMethod>
	    <LibMethod Comment="" Name="LL_CRS_SetSyncSignalSource">
        <Argument AddressOf="false" GenericType="simple" Name="Source"/>
    </LibMethod>
	    <LibMethod Comment="" Name="LL_CRS_SetReloadCounter">
        <Argument AddressOf="false" GenericType="simple" Name="Value"/>
    </LibMethod>
	    <LibMethod Comment="" Name="LL_CRS_SetFreqErrorLimit">
        <Argument AddressOf="false" GenericType="simple" Name="Value"/>
    </LibMethod>
	    <LibMethod Comment="" Name="LL_CRS_SetHSI48SmoothTrimming">
        <Argument AddressOf="false" GenericType="simple" Name="Value"/>
    </LibMethod>
    <RefComponent Cclass="HAL" Cgroup="RCC" Cversion="1.5.0">
        <File Category="header" Name="Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_bus.h"/>
        <File Category="header" Name="Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_cortex.h"/>
        <File Category="header" Name="Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_rcc.h"/>
        <File Category="source" Name="Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_rcc.c"/>
        <File Category="header" Name="Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_crs.h"/>
        <File Category="header" Name="Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_system.h"/>
        <File Category="header" Name="Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_utils.h"/>
        <File Category="source" Name="Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_utils.c"/> 
        <File Category="header" Name="Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_exti.h"/>
        <File Category="source" Name="Drivers/STM32L0xx_HAL_Driver/Src/stm32l0xx_ll_exti.c"/>
        <File Category="header" Name="Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_pwr.h"/>
        <File Category="header" Name="Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_gpio.h"/>
        <File Category="header" Name="Drivers/STM32L0xx_HAL_Driver/Inc/stm32l0xx_ll_dma.h"/>
    </RefComponent>
</IP>
