<?xml version="1.0" encoding="utf-8" standalone="no"?>
<IP xmlns="http://mcd.rou.st.com/modules.php?name=mcu" DBVersion="V4.0" Name="RCC" Version="STM32Cube_FW_f3_V1.5.0" IncludeFile="stm32f3xx_ll_rcc.h;stm32f3xx_ll_bus.h;stm32f3xx_ll_system.h;stm32f3xx_ll_exti.h;stm32f3xx_ll_cortex.h;stm32f3xx_ll_utils.h;stm32f3xx_ll_pwr.h;stm32f3xx_ll_dma.h" 
    xmlns:ns0="http://www.w3.org/2001/XMLSchema-instance" ns0:schemaLocation="http://mcd.rou.st.com/modules.php?name=mcu ../../../../../../../../doc/V4/Development/Specifications/db/IP_Configs.xsd">

    <RefConfig Name="RCC_OSCConfig">
      
        <!--flash latency configuration-->

        <IFCondition Expression ="1=1">

            <CallLibMethod Name="LL_FLASH_SetLatency">
                <MethodArg Name="Latency" ParameterName="FLatency"/>
            
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="FLatency=FLASH_LATENCY_0">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#twhile(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_0)#n#t{#n#t}"/>
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="FLatency=FLASH_LATENCY_1">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#twhile(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_1)#n#t{#n#t}"/>
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="FLatency=FLASH_LATENCY_2">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#twhile(LL_FLASH_GetLatency()!= LL_FLASH_LATENCY_2)#n#t{#n#t}"/>
            </CallLibMethod>
        </IFCondition>

       <!--Clock source activation-->
      
        <IFCondition Expression ="HSEUsed=1 &amp; HSEByPass ">
            <CallLibMethod Name="LL_RCC_HSE_EnableBypass" />
        </IFCondition>
     
		
        <IFCondition Expression ="HSEUsed=1">
            <CallLibMethod Name="LL_RCC_HSE_Enable"/>
   
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till HSE is ready */#n#twhile(LL_RCC_HSE_IsReady() != 1)#n#t{#n#t#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>   
  
		
        <IFCondition Expression ="HSIUsed=1">
            <CallLibMethod Name="LL_RCC_HSI_Enable"/>
     
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till HSI is ready */#n#twhile(LL_RCC_HSI_IsReady() != 1)#n#t{#n#t#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="HSIUsed=1">
            <CallLibMethod Name="LL_RCC_HSI_SetCalibTrimming">
                <MethodArg Name="Value" ParameterName="HSICalibrationValue"/>
            </CallLibMethod>
        </IFCondition>
		
  
	
				
        <IFCondition Expression ="LSIUsed=1">
            <CallLibMethod Name="LL_RCC_LSI_Enable"/>

            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till LSI is ready */#n#twhile(LL_RCC_LSI_IsReady() != 1)#n#t{#n#t#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>
		
           <IFCondition Expression ="RTCUsed_ForRCC|(LSEUsed=1)">
            <CallLibMethod Name="LL_PWR_EnableBkUpAccess">
            </CallLibMethod>
        </IFCondition> 	 

        <IFCondition Expression ="LSEUsed=1 &amp; LSEByPass">
            <CallLibMethod Name="LL_RCC_LSE_EnableBypass"/>
        </IFCondition>
		<IFCondition Expression ="LSEOscillator &amp;(LSEUsed=1)">
            <CallLibMethod Name="LL_RCC_LSE_SetDriveCapability">
			 <MethodArg Name="LSEDrive" ParameterName="LSE_Drive_Capability"/>
            </CallLibMethod>
        
        </IFCondition> 	
        <IFCondition Expression ="LSEUsed=1">
            <CallLibMethod Name="LL_RCC_LSE_Enable"/>
         
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till LSE is ready */#n#twhile(LL_RCC_LSE_IsReady() != 1)#n#t{#n#t#t#n#t}"/>
            </CallLibMethod>
        </IFCondition> 
	<IFCondition Expression ="RTCUsed_ForRCC &amp; RTCClockSelection=RCC_RTCCLKSOURCE_LSI">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#tif(LL_RCC_GetRTCClockSource() != LL_RCC_RTC_CLKSOURCE_LSI)#n#t{"/>
            </CallLibMethod>
        <Else>
            <IFCondition Expression ="RTCUsed_ForRCC &amp; RTCClockSelection=RCC_RTCCLKSOURCE_LSE">
                <CallLibMethod Name="" Type="HardCode">
                    <HardCode Text="#tif(LL_RCC_GetRTCClockSource() != LL_RCC_RTC_CLKSOURCE_LSE)#n#t{"/>
                </CallLibMethod>
                <Else>
                    <IFCondition Expression ="RTCUsed_ForRCC &amp; RTCClockSelection=RCC_RTCCLKSOURCE_HSE_DIV32">
                        <CallLibMethod Name="" Type="HardCode">
                            <HardCode Text="#tif(LL_RCC_GetRTCClockSource() != LL_RCC_RTC_CLKSOURCE_HSE_DIV32)#n#t{"/>
                            </CallLibMethod>
                    </IFCondition>
                </Else>
            </IFCondition>
        </Else>
        </IFCondition>

        <IFCondition Expression ="RTCUsed_ForRCC">
            <CallLibMethod Name="#tLL_RCC_ForceBackupDomainReset">
            </CallLibMethod>

            <CallLibMethod Name="#tLL_RCC_ReleaseBackupDomainReset">
            </CallLibMethod>
        </IFCondition>

        <IFCondition Expression ="RTCUsed_ForRCC|LCDUsed_ForRCC">
            <CallLibMethod Name="#tLL_RCC_SetRTCClockSource">
                <MethodArg Name="Source" ParameterName="RTCClockSelection"/>
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="RTCUsed_ForRCC">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#t}"/>
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="RTCUsed_ForRCC|LCDUsed_ForRCC">
            <CallLibMethod Name="LL_RCC_EnableRTC"/>
        </IFCondition>

        <!--CSS enable code gen-->
        <IFCondition Expression ="CSSEnabled">
            <CallLibMethod Name="LL_RCC_HSE_EnableCSS"/>
        </IFCondition>
		
     
		
		
		
        <!--PLL configuration-->
		
        <IFCondition Expression ="PLLUsed=1">
            <CallLibMethod Name="LL_RCC_PLL_ConfigDomain_SYS">
                <MethodArg Name="Source" ParameterName="PLLSourceVirtual"/>
                <MethodArg Name="PLLMul" ParameterName="PLLMUL"/>
                <MethodArg Name="PLLDiv" ParameterName="PLLDivider"/>
            </CallLibMethod>
        </IFCondition>
		
		
		
        <!--PLL activation-->
      	<IFCondition Expression ="PLLUsed=1">
            <CallLibMethod Name="LL_RCC_PLL_Enable"/>
   
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till PLL is ready */#n#twhile(LL_RCC_PLL_IsReady() != 1)#n#t{#n#t#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>
		
		
		
       
		
        <IFCondition Expression ="1=1">

            <CallLibMethod Name="LL_RCC_SetAHBPrescaler">
                <MethodArg Name="Prescaler" ParameterName="AHBCLKDivider"/>
            </CallLibMethod>
        </IFCondition>

     
        <IFCondition Expression ="1=1">

            <CallLibMethod Name="LL_RCC_SetAPB1Prescaler">
                <MethodArg Name="Prescaler" ParameterName="APB1CLKDivider"/>
            </CallLibMethod>
        </IFCondition>

     
        <IFCondition Expression ="1=1">

            <CallLibMethod Name="LL_RCC_SetAPB2Prescaler">
                <MethodArg Name="Prescaler" ParameterName="APB2CLKDivider"/>
            </CallLibMethod>
        </IFCondition>

        <!--sys clock source + AHB/APB configuration-->
        <IFCondition Expression ="1=1">

            <CallLibMethod Name="LL_RCC_SetSysClkSource">
                <MethodArg Name="Source" ParameterName="SYSCLKSourceVirtual"/>
            </CallLibMethod>
        
        
        </IFCondition>
        <IFCondition Expression ="SysSourcePLL">

            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till System clock is ready */#n#twhile(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_PLL)#n#t{#n#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="SysSourceHSE">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till System clock is ready */#n#twhile(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSE)#n#t{#n#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="SysSourceHSI">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till System clock is ready */#n#twhile(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_HSI)#n#t{#n#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>
        <IFCondition Expression ="SysSourceMSI">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Wait till System clock is ready */#n#twhile(LL_RCC_GetSysClkSource() != LL_RCC_SYS_CLKSOURCE_STATUS_MSI)#n#t{#n#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>

        <!--system core frequency set,systick init,systick priority configuration-->

        

        <IFCondition Expression ="USE_FULL_LL_DRIVER">
            <CallLibMethod Name="LL_Init1msTick">
                <MethodArg Name="HCLKFrequency" ParameterName="CortexFreq_Value"/>            
            </CallLibMethod>
        </IFCondition>
        
        <IFCondition Expression ="1=1">
            <CallLibMethod Name="LL_SetSystemCoreClock">
                <MethodArg Name="HCLKFrequency" ParameterName="HCLKFreq_Value"/>
            
            </CallLibMethod>
        </IFCondition>
        
        <IFCondition Expression ="!USE_FULL_LL_DRIVER">
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#n#t /* Update the time base */"/>
            </CallLibMethod>
            <CallLibMethod Name="" Type="HardCode">
                <HardCode Text="#tif (HAL_InitTick (TICK_INT_PRIORITY) != HAL_OK)#n#t{#n#t#tError_Handler();#t#n#t}"/>
            </CallLibMethod>
        </IFCondition>
   
		
        <!--peripheral clock source configuration -->
        <IFCondition Expression ="USART1Used_ForRCC">
            <CallLibMethod Name="LL_RCC_SetUSARTClockSource">
                <MethodArg Name="USARTxSource" ParameterName="Usart1ClockSelection"/>
            </CallLibMethod>
        </IFCondition>
		

		
        <IFCondition Expression ="USART2Used_ForRCC">
            <CallLibMethod Name="LL_RCC_SetUSARTClockSource">
                <MethodArg Name="USARTxSource" ParameterName="Usart2ClockSelection"/>
            </CallLibMethod>
        </IFCondition>
		
        <IFCondition Expression ="USART3Used_ForRCC">
            <CallLibMethod Name="LL_RCC_SetUSARTClockSource">
                <MethodArg Name="USARTxSource" ParameterName="Usart3ClockSelection"/>
            </CallLibMethod>
        </IFCondition>
		
        <IFCondition Expression ="UART4Used_ForRCC">
            <CallLibMethod Name="LL_RCC_SetUARTClockSource">
                <MethodArg Name="UARTxSource" ParameterName="Uart4ClockSelection"/>
            </CallLibMethod>
        </IFCondition>
		
        <IFCondition Expression ="UART5Used_ForRCC">
            <CallLibMethod Name="LL_RCC_SetUARTClockSource">
                <MethodArg Name="UARTxSource" ParameterName="Uart5ClockSelection"/>
            </CallLibMethod>
        </IFCondition>
		
        <IFCondition Expression ="I2C1Used_ForRCC">
            <CallLibMethod Name="LL_RCC_SetI2CClockSource">
                <MethodArg Name="I2CxSource" ParameterName="I2c1ClockSelection"/>
            </CallLibMethod>
        </IFCondition>
		
        <IFCondition Expression ="I2C3Used_ForRCC">
            <CallLibMethod Name="LL_RCC_SetI2CClockSource">
                <MethodArg Name="I2CxSource" ParameterName="I2c3ClockSelection"/>
            </CallLibMethod>
        </IFCondition>
		
        <IFCondition Expression ="I2C2Used_ForRCC">
            <CallLibMethod Name="LL_RCC_SetI2CClockSource">
                <MethodArg Name="I2CxSource" ParameterName="I2c2ClockSelection"/>
            </CallLibMethod>
        </IFCondition>

        <IFCondition Expression ="I2S2Used_ForRCC|I2S3Used_ForRCC">
            <CallLibMethod Name="LL_RCC_SetI2SClockSource">
                <MethodArg Name="I2SxSource" ParameterName="I2SClockSource"/>
            </CallLibMethod>
        </IFCondition>
		
		
		
        <IFCondition Expression ="TIM1">
            <CallLibMethod Name="LL_RCC_SetTIMClockSource">
                <MethodArg Name="TIMxSource" ParameterName="TIM1Selection"/>
            </CallLibMethod>
        </IFCondition>
		      <IFCondition Expression ="TIM8 &amp; TIM8_Exist">
            <CallLibMethod Name="LL_RCC_SetTIMClockSource">
                <MethodArg Name="TIMxSource" ParameterName="TIM8Selection"/>
            </CallLibMethod>
        </IFCondition>
		      <IFCondition Expression ="TIM17">
            <CallLibMethod Name="LL_RCC_SetTIMClockSource">
                <MethodArg Name="TIMxSource" ParameterName="TIM17Selection"/>
            </CallLibMethod>
        </IFCondition>
		      <IFCondition Expression ="TIM16">
            <CallLibMethod Name="LL_RCC_SetTIMClockSource">
                <MethodArg Name="TIMxSource" ParameterName="TIM16Selection"/>
            </CallLibMethod>
        </IFCondition>
		      <IFCondition Expression ="TIM15">
            <CallLibMethod Name="LL_RCC_SetTIMClockSource">
                <MethodArg Name="TIMxSource" ParameterName="TIM15Selection"/>
            </CallLibMethod>
        </IFCondition>
		      <IFCondition Expression ="TIM2">
            <CallLibMethod Name="LL_RCC_SetTIMClockSource">
                <MethodArg Name="TIMxSource" ParameterName="TIM2Selection"/>
            </CallLibMethod>
        </IFCondition>

		      <IFCondition Expression ="TIM3|TIM4">
            <CallLibMethod Name="LL_RCC_SetTIMClockSource">
                <MethodArg Name="TIMxSource" ParameterName="TIM34Selection"/>
            </CallLibMethod>
        </IFCondition>
		
		
        <IFCondition Expression ="HRTIM1Used_ForRCC">
            <CallLibMethod Name="LL_RCC_SetHRTIMClockSource">
                <MethodArg Name="HRTIMxSource" ParameterName="HRTIMSelection"/>
            </CallLibMethod>
        </IFCondition>
		
        <IFCondition Expression ="CECUsed_ForRCC">
            <CallLibMethod Name="LL_RCC_SetCECClockSource">
                <MethodArg Name="CECxSource" ParameterName="CECClockSelection"/>
            </CallLibMethod>
        </IFCondition>
		
        <IFCondition Expression ="USBUsed_ForRCC">
            <CallLibMethod Name="LL_RCC_SetUSBClockSource">
                <MethodArg Name="USBxSource" ParameterName="PRESCALERUSB"/>
            </CallLibMethod>
        </IFCondition>
		


		
        <IFCondition Expression ="((channelSelectedADC1&amp;ADC1UsedAsynchronousCLK_ForRCC)|(channelSelectedADC2&amp;ADC2UsedAsynchronousCLK_ForRCC)) ">
            <CallLibMethod Name="LL_RCC_SetADCClockSource">
                <MethodArg Name="ADCxSource" ParameterName="ADC12PRES"/>
            </CallLibMethod>
        </IFCondition>	
		
        <IFCondition Expression ="(channelSelectedADC3&amp;ADC3UsedAsynchronousCLK_ForRCC)|(channelSelectedADC4&amp;ADC4UsedAsynchronousCLK_ForRCC)">
            <CallLibMethod Name="LL_RCC_SetADCClockSource">
                <MethodArg Name="ADCxSource" ParameterName="ADC34PRES"/>
            </CallLibMethod>
        </IFCondition>
			
        <IFCondition Expression ="USE_SDADC1|USE_SDADC2|USE_SDADC3">
            <CallLibMethod Name="LL_RCC_SetSDADCClockSource">
                <MethodArg Name="SDADCxSource" ParameterName="SDADCPresc"/>
            </CallLibMethod>
        </IFCondition>
		
	
        <!--MCO clock source -->
        <IFCondition Expression ="((SEM2RCC_MCO_REQUIRED_TIM16 &amp; TIM16 &amp; Semaphore_input_Channel1TIM16)|MCOConfig)">
            <CallLibMethod Name="LL_RCC_ConfigMCO">
                <MethodArg Name="MCOxPrescaler" ParameterName="RCC_MCODiv"/>
                <MethodArg Name="MCOxSource" ParameterName="RCC_MCOSource"/>
            </CallLibMethod>
        </IFCondition>
		
	   
   
	   
    </RefConfig>
	 <LibMethod Comment="" Name="LL_RCC_LSE_SetDriveCapability">
        <Argument AddressOf="false" GenericType="simple" Name="LSEDrive"/>
    </LibMethod>
   <LibMethod Comment="" Name="LL_RCC_PLL_ConfigDomain_SYS">
        <Argument AddressOf="false" GenericType="simple" Name="Source"/>
        <Argument AddressOf="false" GenericType="simple" Name="PLLMul"/>
        <Argument AddressOf="false" GenericType="simple" Name="PLLDiv"/>

    </LibMethod>

    <LibMethod Comment="" Name="LL_FLASH_SetLatency">
        <Argument AddressOf="false" GenericType="simple" Name="FLatency"/>
    </LibMethod>
    <LibMethod Comment="" Name="LL_RCC_HSE_EnableCSS"/>
          
    <LibMethod Comment="" Name="LL_RCC_HSE_EnableBypass" />
    
    <LibMethod Comment="" Name="LL_RCC_HSE_Enable"/>

    <LibMethod Comment="" Name="LL_RCC_HSI_Enable"/>
    
    <LibMethod Comment="" Name="LL_RCC_HSI48_Enable"/>
  
    <LibMethod Comment="" Name="LL_RCC_LSE_Enable"/>
	
    <LibMethod Comment="" Name="LL_RCC_LSE_EnableBypass"/>
	
    <LibMethod Comment="" Name="LL_RCC_LSE_EnableCSS"/>
	
    <LibMethod Comment="" Name="LL_RCC_LSI_Enable"/>
	

	   <LibMethod Comment="" Name="LL_RCC_HSI_SetCalibTrimming">
        <Argument AddressOf="false" GenericType="simple" Name="Value"/>
    </LibMethod>

    <LibMethod Comment="" Name="LL_RCC_SetSysClkSource">
        <Argument AddressOf="false" GenericType="simple" Name="Source"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetAHBPrescaler">
        <Argument AddressOf="false" GenericType="simple" Name="Prescaler"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetAPB1Prescaler">
        <Argument AddressOf="false" GenericType="simple" Name="Prescaler"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetAPB2Prescaler">
        <Argument AddressOf="false" GenericType="simple" Name="Prescaler"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_ConfigMCO">
        <Argument AddressOf="false" GenericType="simple" Name="MCOxSource"/>
        <Argument AddressOf="false" GenericType="simple" Name="MCOxPrescaler"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetUSARTClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="USARTxSource"/>
    </LibMethod>

	
    <LibMethod Comment="" Name="LL_RCC_SetUARTClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="UARTxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetI2CClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="I2CxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetI2SClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="I2SxSource"/>
    </LibMethod>

    <LibMethod Comment="" Name="LL_RCC_SetTIMClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="TIMxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetHRTIMClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="HRTIMxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetCECClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="CECxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetUSBClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="USBxSource"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_SetADCClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="ADCxSource"/>
    </LibMethod>  
	
	<LibMethod Comment="" Name="LL_RCC_SetSDADCClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="SDADCxSource"/>
    </LibMethod> 
	
  <LibMethod Comment="" Name="#tLL_RCC_SetRTCClockSource">
        <Argument AddressOf="false" GenericType="simple" Name="Source"/>
    </LibMethod>
	
    <LibMethod Comment="" Name="LL_RCC_EnableRTC"/>
	    <LibMethod Comment="" Name="LL_PWR_EnableBkUpAccess"/>
    <LibMethod Comment="" Name="#tLL_RCC_ForceBackupDomainReset"/>
    <LibMethod Comment="" Name="#tLL_RCC_ReleaseBackupDomainReset"/>
    <LibMethod Comment="" Name="LL_RCC_PLL_Enable"/>



  
    
    <LibMethod Comment="" Name="LL_SetSystemCoreClock">
        <Argument AddressOf="false" GenericType="simple" Name="HCLKFrequency"/>
    </LibMethod>
    <LibMethod Comment="" Name="LL_Init1msTick">
        <Argument AddressOf="false" GenericType="simple" Name="HCLKFrequency"/>
    </LibMethod>
	
    <RefComponent Cclass="HAL" Cgroup="RCC" Cversion="1.5.0">
        <File Category="header" Name="Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_bus.h"/>
        <File Category="header" Name="Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_cortex.h"/>
        <File Category="header" Name="Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_rcc.h"/>
        <File Category="source" Name="Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_rcc.c"/>
        <File Category="header" Name="Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_crs.h"/>
        <File Category="header" Name="Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_system.h"/>
        <File Category="header" Name="Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_utils.h"/>
        <File Category="header" Name="Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_utils.c"/> 
		<File Category="header" Name="Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_exti.h"/>
        <File Category="header" Name="Drivers/STM32F3xx_HAL_Driver/Src/stm32f3xx_ll_exti.c"/>
        <File Category="header" Name="Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_pwr.h"/>
        <File Category="header" Name="Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_gpio.h"/>
        <File Category="header" Name="Drivers/STM32F3xx_HAL_Driver/Inc/stm32f3xx_ll_dma.h"/>
    </RefComponent>
</IP>
