LabVIEW WSN: (Hex 0xFFFF9CC9) The last LV WSN Error. Turn back, padawan, there is no where else to go. LabVIEW WSN: (Hex 0xFFFF9D05) You must enable the serial port receiver power before calling this function, or no new data can be read. LabVIEW WSN: (Hex 0xFFFF9D06) The device does not support reading or writing the specified number of bytes from the serial port at one time. LabVIEW WSN: (Hex 0xFFFF9D07) The specified number of bytes cannot be read or written within the specified timeout. LabVIEW WSN: (Hex 0xFFFF9D08) The specified serial port configuration is unsupported on this device. LabVIEW WSN: (Hex 0xFFFF9D11) Not enough user RAM. LabVIEW WSN: (Hex 0xFFFF9D12) Invalid user RAM refnum. LabVIEW WSN: (Hex 0xFFFF9D13) Verification of user memory failed. LabVIEW WSN: (Hex 0xFFFF9D14) Failed to write to user memory. LabVIEW WSN: (Hex 0xFFFF9D15) Failed to write to user memory because the location is not empty. LabVIEW WSN: (Hex 0xFFFF9D16) User memory out of bounds. The operation specified a location outside the user memory sector. LabVIEW WSN: (Hex 0xFFFF9D17) Failed to erase the specified user memory sector. LabVIEW WSN: (Hex 0xFFFF9D18) Null pointer exception. LabVIEW WSN: (Hex 0xFFFF9D1F) Internal error: Hardware failure. LabVIEW WSN: (Hex 0xFFFF9D20) The node is not connected. LabVIEW WSN: (Hex 0xFFFF9D21) Invalid argument. LabVIEW WSN: (Hex 0xFFFF9D22) User message missed. LabVIEW WSN: (Hex 0xFFFF9D23) Radio failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. LabVIEW WSN: (Hex 0xFFFF9D24) Flash failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. LabVIEW WSN: (Hex 0xFFFF9D25) Command queue overflow: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. LabVIEW WSN: (Hex 0xFFFF9D26) Digital output line failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. LabVIEW WSN: (Hex 0xFFFF9D27) ADC failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. LabVIEW WSN: (Hex 0xFFFF9D28) CJC failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. LabVIEW WSN: (Hex 0xFFFF9D29) SPI communication failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. LabVIEW WSN: (Hex 0xFFFF9D2A) Serial receiving failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. LabVIEW WSN: (Hex 0xFFFF9D2B) Serial transmission failure: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. LabVIEW WSN: (Hex 0xFFFF9D2C) An internal error has occurred in the LabVIEW Wireless Sensor Network Module. Please contact National Instruments technical support at ni.com/support. LabVIEW WSN: (Hex 0xFFFF9D3D) The node ID does not exist in the gateway's node table. LabVIEW WSN: (Hex 0xFFFF9D3E) Invalid message reference. LabVIEW WSN: (Hex 0xFFFF9D3F) Invalid node reference. LabVIEW WSN: (Hex 0xFFFF9D40) Invalid gateway reference. LabVIEW WSN: (Hex 0xFFFF9D5A) Connection timed out. Gateway might be in a bad state. LabVIEW WSN: (Hex 0xFFFF9D5B) Double interface registration: An internal error has occurred. Please contact National Instruments technical support at ni.com/support. LabVIEW WSN: (Hex 0xFFFF9D5C) Incompatible or corrupted data was received from the gateway. LabVIEW WSN: (Hex 0xFFFF9D5D) Memory error. Unable to deallocate used memory. LabVIEW WSN: (Hex 0xFFFF9D5E) Memory allocation failed. LabVIEW WSN: (Hex 0xFFFF9D72) The request processor failed to deserialize a request. This error can occur if protocol versions are incompatible or data is corrupt. LabVIEW WSN: (Hex 0xFFFF9D73) The request processor failed to deserialize a request. This error can occur if protocol versions are incompatible. LabVIEW WSN: (Hex 0xFFFF9D74) The request terminated due to an unhandled exception. LabVIEW WSN: (Hex 0xFFFF9D75) Memory allocation failed. LabVIEW WSN: (Hex 0xFFFF9D76) The client was denied access. LabVIEW WSN: (Hex 0xFFFF9D77) The client aborted the connection. LabVIEW WSN: (Hex 0xFFFF9D78) Network communication failed. LabVIEW WSN: (Hex 0xFFFF9D79) Connection timed out. LabVIEW WSN: (Hex 0xFFFF9D7A) Unable to connect to the named service. LabVIEW WSN: (Hex 0xFFFF9D7B) Unable to connect to the named gateway. LabVIEW WSN: (Hex 0xFFFF9D7C) Generic connection error. LabVIEW WSN: (Hex 0xFFFF9D90) First LV WSN Error LabVIEW WSN: (Hex 0x526C) First LV WSN Warning LabVIEW WSN: (Hex 0x52F8) The serial port receiver received a break condition on the line. LabVIEW WSN: (Hex 0x52F9) The specified number of bytes were read from the serial port before the specified termination string was detected. LabVIEW WSN: (Hex 0x5333) The last LV WSN Warning.