-------------------------------------------------------------------------------- Vector WDM/WDF Driver for Windows XP (32 Bit), Windows Vista (32 Bit), Windows 7 (32 Bit/64 Bit) and Windows 8 (32 Bit/64 Bit) Vector Informatik GmbH, Stuttgart -------------------------------------------------------------------------------- Vector Informatik GmbH Ingersheimer Straße 24 70499 Stuttgart Germany Phone: ++49 - 711 - 80670 - 200 Fax: ++49 - 711 - 80670 - 555 -------------------------------------------------------------------------------- Content ------- 1. Device Driver Installation 2. Device Driver Update 3. Vector Hardware Configuration utility (vcanconf.exe) 4. Troubleshooting 5. Uninstall 6. Support -------------------------------------------------------------------------------- 1. Device Driver Installation ----------------------------- - Start your computer. - Be sure that you have administrator rights. - Insert the driver disk. - Start setup.exe from the DriverSetup directory on the driver disk. - Press the NEXT button. - Select device and press the INSTALL button. - Follow the instructions of the DriverSetup program. For additional help and information please refer to the installation manual shipped with the driver CD or available on the Vector internet homepage (http://www.vector.com, section support). -------------------------------------------------------------------------------- 2. Device Driver Update ----------------------- - Start your computer. - Be sure that you have administrator rights. - Insert the driver disk. - Start setup.exe from the DriverSetup directory on the driver disk. - Press the NEXT button. - Select device and press the INSTALL button. - Follow the instructions of the DriverSetup program. For additional help and information please refer to the installation manual shipped with the Driver CD or on the Vector internet homepage (http://www.vector.com, section support). -------------------------------------------------------------------------------- 3. Vector Hardware Configuration utility (vcanconf.exe) ------------------------------------------------------- The Vector Hardware Configuration utility (vcanconf.exe) gives you the ability to configurate all installed Vector Hardware. It is located in your Control Panel under 'Vector Hardware' or on your driver CD. -------------------------------------------------------------------------------- 4. Troubleshooting ------------------ For troubleshooting please refer to the installation manual of the corresponding device. -------------------------------------------------------------------------------- 5. Uninstall ------------ - Start your Computer. - Be sure you have administrator rights. - Insert the driver disk. - Start setup.exe from the DriverSetup directory on the driver disk. - Press the NEXT button. - Select device and press the UNINSTALL button. - Follow the instructions of the DriverSetup program. -------------------------------------------------------------------------------- 6. Support ---------- If you need technical support, you find additional information on the Vector internet homepage (http://www.vector.com) or contact Vector by mail (see mail addresses listed below) and send the following information: - logfile generated by the Vector Hardware Configuration Utility - version number of the driver - version number of the device's firmware - serial number of the hardware - application software you're using - your computer system - your operating system - description of your problem Vector Support E-Mail addresses: - support@vector-informatik.de - support@vector-cantech.com - support@vector-korea.com - support@vector-france.com - support@vecscan.com - repair-support@vector-gb.co.uk - Tool@vector-japan.co.jp --------------------------------------------------------------------------------