Name of the channel. The maximum number of times that a node in this cluster is permitted to attempt to start the cluster by initiating schedule synchronization.(gColdStartAttempts) Number of macroticks the action point is offset from the beginning of a static slots or symbol window. (gdActionPointOffset) The duration of the dynamic slot idle phase in minislots.(gdDynamicSlotIdlePhase) The duration of a minislot in macroticks.(gdMinislot) Number of macroticks the minislot action point is offset from the beginning of a minislot. Unit: macroticks(gdMinislotActionPointOffset) The duration of the network idle time in macroticks(gdNIT) Sample clock period. gdSampleClockPeriod = gdBit / 8; Unit: �s (gdSampleClockPeriod) The duration of a slot in the static segment. Unit: macroticks (gdStaticSlot) The duration of the symbol window. Unit: macroticks (gdSymbolWindow) Number of bits in the Transmission Start Sequence. Unit:bitDuration (gdTSSTransmitter) Upper limit for the start up and wake up listen timeout in the presence of noise. Expressed as a multiple of the cluster constant pdListenTimeout. (gListenNoise) The number of macroticks in a communication cycle Duration of the cluster wide nominal macrotick, expressed in �s (pdMicrotick = pSamplesPerMicrotick * gdSampleClockPeriod). Unit: �s (gdMacrotick) Maximum error that a node may have following integration. Unit: �s (gdMaxInitializationError) Threshold used for testing the vClockCorrectionFailed counter. Defines the number of consecutive even/odd cycle pairs with missing clock correction terms that will cause the protocol to transition from the POC:normal active or POC:normal passive state into the POC:halt state. Unit: Even/Odd Cycle Pairs (gMaxWithoutClockCorrectionFatal) Threshold used for testing the vClockCorrectionFailed counter. Defines the number of consecutive even/odd cycle pairs with missing clock correction terms that will cause the protocol to transition from the POC:normal active state to the POC:normal passive state. Note that gMaxWithoutClockCorrectonPassive = gMaxWithoutClockCorrectionFatal = 15. Unit: Even/Odd Cycle Pairs (gMaxWithoutClockCorrectionPassive) Length of the Network Management vector in a cluster. Default: 0. Unit: byte (gNetworkManagementVectorLength) Number of minislots in the dynamic segment. (gNumberOfMinislots) The number of static slots in the static segment (gNumberOfStaticSlots) Start of the offset correction phase within the NIT, expressed as the number of macroticks from the start of cycle. Unit: macroticks (gOffsetCorrectionStart) Payload length of a static frame (All static frames in a cluster have the same payload length). Unit: 16-bit WORDS (gPayloadLengthStatic) Maximum number of nodes that may send frames with the sync frame indicator bit set. (gSyncNodeMax) Upper limit of the CAS acceptance window. gdCASRxLowMax[gdBit] = ceil( 2 * (gdTSSTransmitter[gdBit] + cdCAS[gdBit]) * (1 + 2 * cClockDeviationMax) ). Unit:bitDuration (gdCASRxLowMax) Nominal bit time (= 1 / fx:SPEED). gdBit = cSamplesPerBit * gdSampleClockPeriod. Unit:�s (gdBit) Length of the cycle (See the minimum constraint for gMacroPerCycle. Maximum value is given by cdCycleMax). Unit:�s (gdCycle) The cluster drift damping factor, expressed in multiples of the smallest microtick used in the cluster. Used to compute the local cluster drift damping factor pClusterDriftDamping. Unit:�T (gClusterDriftDamping) Referenced channel used by the node to send a wakeup pattern. (pWakeupChannel) Maximum payload length of a dynamic frame in 16bit WORDS (pPayloadLengthDynMax) Local cluster drift damping factor used for rate correction. Unit:�T (pClusterDriftDamping) Value used by the receiver to calculate the difference between primary time reference point and secondary time reference point. Unit: �T (pDecodingCorrection) Upper limit for the start up listen timeout and wake up listen timeout. pdListenTimeout[�T] = 2 * (pMicroPerCycle[�T] + pdMaxDrift[�T]). Unit:�T (pdListenTimeout) Maximum drift offset between two nodes that operate with unsynchronized clocks over one communication cycle. Unit: �T (pdMaxDrift) Number of microticks added or subtracted to the NIT to carry out a host-requested external offset correction. (pExternOffsetCorrection) Number of microticks added or subtracted to the cycle to carry out a host-requested external rate correction. (pExternRateCorrection) Number of the last minislot in which a frame transmission can start in the dynamic segment. Unit:minislot (pLatestTx) Nominal number of microticks in the communication cycle of the local node. If nodes have different microtick durations this number will differ from node to node. (pMicroPerCycle) Magnitude of the maximum permissible offset correction value. Unit:microtick (pOffsetCorrectionOut) Magnitude of the maximum permissible rate correction value. Unit:�T (pRateCorrectionOut) Number of samples per microtick (Shall not be part of the conformance test due to implementation dependency). pSamplesPerMicrotick = pdMicrotick / gdSampleClockPeriod = pdMicrotick / (gdBit / cSamplesPerBit) = 8 * pdMicrotick / gdBit; (pSamplesPerMicrotick) Value used to compensate for reception delays on channel A. This covers assumed propagation delay up to cPropagationDelayMax for microticks in the range of 0.0125 �s to 0.05 �s. In practice, the minimum of the propagation delays of all sync nodes should be applied. Unit:microticks Unit:�T (pDelayCompensation[A]) Value used to compensate for reception delays on channel B. This covers assumed propagation delay up to cPropagationDelayMax for microticks in the range of 0.0125 �s to 0.05 �s. In practice, the minimum of the propagation delays of all sync nodes should be applied. Unit:microticks Unit:�T (pDelayCompensation[B]) Number of repetitions of the wakeup symbol that are combined to form a wakeup pattern when the node enters the POC:wakeup send state. (pWakeupPattern) Boolean flag that controls the transition to the POC:halt state due to a clock synchronization errors If set to true, the CC is allowed to transition to POC:halt. If set to false, the CC will not transition to the POC:halt state but will enter or remain in the POC:normal passive state (self healing would still be possible). (pAllowHaltDueToClock) Number of consecutive even/odd cycle pairs that must have valid clock correction terms before the CC will be allowed to transition from the POC:normal passive state to POC:normal active state. If set to 0, the CC is not allowed to transition from POC:normal passive to POC:normal active. (pAllowPassiveToActive) Expanded range of measured clock deviation allowed for startup frames during integration. Unit:�T (pdAcceptedStartupRange) Integer number of macroticks between the static slot boundary and the closest macrotick boundary of the secondary time reference point based on the nominal macrotick duration. (pMacroInitialOffset) Integer number of macroticks between the static slot boundary and the closest macrotick boundary of the secondary time reference point based on the nominal macrotick duration. (pMacroInitialOffset) Number of microticks between the closest macrotick boundary described by gMacroInitialOffset and the secondary time reference point. The parameter depends on pDelayCompensation[x] and therefor it has to be set independently for each channel. (pMicroInitialOffset[A]) Number of microticks between the closest macrotick boundary described by gMacroInitialOffset and the secondary time reference point. The parameter depends on pDelayCompensation[x] and therefor it has to be set independently for each channel. (pMicroInitialOffset[B]) Flag indicating whether or not the node shall enter single slot mode following startup. (pSingleSlotEnabled) Duration of a microtick (Shall not be part of the conformance test due to implementation dependency). pSamplesPerMicrotick * gdSampleClockPeriod Unit:µs (pdMicrotick) Number of microticks per nominal macrotick that all implementations must support. (pMicroPerMacroNom) Flag indicating whether the Key Slot is used to transmit a startup frame and or a sync frame. (pKeySlotUsedForStartup, pKeySlotUsedForSync) The Key Slot is used to transmit a startup frame and a sync frame. The Element holds the slot-id (pKeySlotUsedForStartup, pKeySlotUsedForSync, pKeySlotId) The Key Slot is used to transmit a sync frame. The Element holds the slot-id (pKeySlotUsedForStartup, pKeySlotUsedForSync, pKeySlotId) The Key Slot is not used to transmit anything. Therefore the Element holds no slot-id (pKeySlotUsedForStartup, pKeySlotUsedForSync, pKeySlotId) Wake-up related elements. If not used, then the device does not use wake up functionality. Number of bits used by the node to test the duration of the "idle" portion of a received wakeup symbol. Equal to 6 µs minus a safe part. (Collisions, clock differences, and other effects can deform the Tx-wakeup pattern.) Unit:bitDuration (gdWakeupSymbolRxIdle) Number of bits used by the node to test the LOW portion of a received wakeup symbol. Equal to 6 µs minus a safe part. (Active stars, clock differences, and other effects can deform the Tx-wakeup pattern). Unit:bitDuration (gdWakeupSymbolRxLow) Number of bits used by a node to test the overall duration of a received wakeup symbol. Equal to 30 µs plus a safe part. (Clock differences and other effects can deform the Tx-wakeup pattern). Unit:bitDuration (gdWakeupSymbolRxWindow) Duration of the idle phase between two low phases inside a wakeup pattern. Unit:bitDuration (cdWakeupSymbolTxIdle) Duration of low phase of a transmitted wakeup symbol. Unit:bitDuration (cdWakeupSymbolTxLow) The FlexRay-specific restriction of the common PROTOCOL-TYPE